I am creating a temp table using the following code:
Code:Dim cat as ADOX.Catalog Dim tbl as ADOX.Table Set cat = New ADOX.Catalog cat.ActiveConnection = CurrentProject.Connection Set tbl = New ADOX.TableWith tbl.Name = "tblContactsTemp".ParentCatalog = cat.Columns.Append "CustomerID", adInteger.Columns.Append "LastName", adWChar, 50End With cat.Tables.Append tbl
This creates the table almost exactly as I want it. The problem is that this creates all columns as required. I have read through all the Microsoft Knowledge Base items about ADOX that I can find, and I have not discovered how to set a columns properties to NOT Required. Does anyone have experience with how to change the properties for this?
I have been able to change one property, the AutoIncrement, on integer types, using:Code:.Columns("CustomerID").Properties("AutoIncrement") = Trueincluded after that column's append in the example above, but attempting something similar with
Code:.Columns("LastName").Properties("Required") = Falsedoes not work.
Hi, I would like to change the properties of either the column heads in a combo-box or the column names for tables. I don't think there's any way to adjust the column head properties, and I'm doubtful there's a way to change the column caption properties.
Some of my column titles are long, and I'd like to be able to word wrap them essentially. Anyone know if this is possible? Thanks.
hello, I wanted to know how to copy a column and it's properties by programming (VBA-SQL). I have a column that has a list of values, and want to duplicate it (with another name).The new column should have the same list of values.
hello, I wanted to know how to copy a column and it's properties by programming (VBA-SQL). I have a column that has a list of values, and want to duplicate it (with another name).The new column should have the same list of values.
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
When using the help file in the vb editor i cannot get any topics on ADO or ADOX. I can see them in the index but there no related help topic appears. I have reinstalled all files from the Office CD, addded any references that look like they might have something to do with ADO but still no luck. Ideas anyone?
I am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
In the organisation that I work for employees get paid every 2 weeks on a Saturday. So for this financial year the pay period end dates have been 08/07/2006, 22/07/2006, 05/08/2006 etc
I have a column in an Access table listing various dates. I want the next column to be populated with the next pay period end date after that date.
So if DATE is 05/07/2006 I want PAY PERIOD END to be 08/07/2006 and if DATE is 09/07/2006 I want PAY PERIOD END to be 22/07/2006 etc
I have created a cross tab to extract pipeline and sales for Q1 2014, Q2 2014, Q3 2014 & Q4 2014... the user can select the quater from a multivalued text box...
Now for the final output, have created another query which pull the above four quarter in each column from the cross tab...now the problem arises when i change the quarter to Q2 2014, Q3 2014, Q4 2014 & Q1 2014..it gives an error "Microsoft office Access database does not recognizes "Query name" as a valid field name or expression".
The error is because the second layer of query does not identifies Q1 2014.
How do i make access change the column automatically when the Q1 changes to Q2...
I need to input a string into a column named "EventType". The code should first check if the column "Agent Name" contains any strings. If there is none, it will input "IBM Director" into the EventType column.
Once it has looped through the agent names, the code will then loop through the Details column and input into EventTypes based on what is displayed within the string.
These are the codes that I am using to achieve this, however nothing is being input into the EventType column.
Code: Private Sub Command11_Click() Dim dbs As DAO.Database Dim rst As DAO.Recordset
Set dbs = CurrentDb Set rst = dbs.OpenRecordset("Final")
[Code] ....
I think the problem lies with the code that checks the agent name. When I removed it, it managed to populate the EventType column based on the details. But I still need to find out how to check the agent name too.
i have a columns as 1. contactname, 2. firstname 3. lastname 4. email and in this columns some emails are not matching with the contactname or some time firstname or some time lastname so i need the to find out the un matched contacts from the database.
I have created a sub form and wanted to make it's background transparent and also be able to enter new data and change it on the form. I sat Data entry = Yes, but I still can't enter any data. And I can't find the Back Style property at all.
Any help how to do that will be very much appreciated. B
I was doing my assignment with the table in access, and my sister came up to me and ask me “why it is important to check the properties of each field in a table before developing a form based on that table.” Can anyone help me and answer this, because I don’t know how to answer her question.:confused: :confused::confused:
Am sure this is an easy question but I'm missing something:
How in the heck are you supposed to get to the subform properties box. The only way I know is to click on the very thin border area surrounding the form and then try and right click your way to properties. There has to be an easier way. Usually I have to fight my way to the properties box as the area loses focus by the time I right click and I have to reselect and try and right click again...ARGH!
How could I implement a feature which determines if something is at least 7 days before a booking at a theatre, but no more than 2 months. For example, something like... If =Now() - 7 Then... Elseif =Now() Then... I don't really know how to go about it. Hirer Date is when the booking is to be held (e.g., 12/01/2006) and Booking ID is when it was booked over the phone. (121205/M = 12/12/05 in the Morning) If someone could help me I'd appreciate it greatly. :D
Hi everybody! Is it possible to set the properties for an access database not to confirm the changes when running an update query. I have done it under tools/properties etc. but then I make it in access in general. I want it to apply on one singel access database.
im wanting to reference a value of a dropdown which is already serving a function - the dopdown already has it's bound set to 3 but i want this new function to refercne the second column-
im tyring:
"Tutor = '" & Me.ComboStaff.Value(2) & "'"
which isn't working- how do i reference the second column of a dropdown if its bound to its third?
Hi. I have a question I'm hoping someone can help me with. I would like to take data from multiple columns and put the data into one column. Additionally, I do not want to exclude any data (union all) and I would like to group the resulting union by another field. For example:
So far I'm using the following SQL. What do I need to add or change to get my desired result of grouping the unioned depths by the 'sample event' field?
I appreciate any help anyone may have to offer. Thank you.
SELECT Depth1 AS Depths FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth2 FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth3 FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth4 FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth5 FROM Depth_Velocity_Substrate_Correct
I am looking to add a column in a query that will give a Y or No to previous column data if it contains TEXT or NUMBER (It could read "TEXT" or "NUMBER" or even Y for text or N for number).
I have this table ("people") and an example of possible rows:
id(key) COL 1 COL2 department country name 1 xx yy KPP USA John 2 zz kk KPP USA John 3 ss ff TLL USA John 4 ww qq PPO Italy Marco 5 jj uu PPO Italy Marco
I have to count the number of distinct DEPARTMENT for each NAME; so, for John should be 2 (KPP and TLL) and for Marco 1 (PPO).
I have tryed in this way:
SELECT COUNT(DISTINCT department) AS NumberOfDifferentDepartments FROM people GROUP BY name;
I have a Access 2003 file and I want to filter anywhere where there last name is "expired" and change the column first name to say "no". How do I do that?
ciao people i've been looking around for days, hope u can solve my problem!
my form is made up of several combo boxes i wanna write a code which after a selection in any combo box sets the properties of the latter as follow: enabled NO and locked YES (just the opposite of the default value)