I am working on an ADP ( first time working with this ). I have a form that is based on a parametized query.
The record source for the form is the parametized query which works fine the first time it is brought up. When the user wants to change the client number, a button "change client" is clicked and the event that gets triggered is openform=("edit client")...... Well, instead of being prompted, I get the error "The ApplyFilter action contiains a filter name that cannot be applied".... When I do a right -click on that same button, and "remove filter "I can get my prompt, but I dont want to keep doing that. I am not sure how to remove the filter from this button. I am not sure what the error message is telling me. Thanks for your help.
I have a query where on an IIF result a field is displayed or an "OK"
I have an imported field of 6 chrs where I only want the left 5 so I use Loc:=Left([Location],5) ,
I then compare the result in, MoveTo: to another fixed field [PreferLoc]
MoveTo: IIf([Loc]=[PreferLoc],"OK",[PreferLoc])
I wish to citeria out all the "OK" values so I have <>"OK" in the critria section but when I try to run the query I am presented with a selection box asking for Loc This Query feeds a report so I set the filter to yes in the report properties and use [MoveTo]<>"OK" as the filter and this works great until I close and reopen the app where the filter has gone ? Can anyone advise where I am going wrong with my query and or my report ?
I have created a runtime setup package for a friend to let her use my Access 2010 application, without having to purchase Access 2010. However, the ApplyFilter macro in one of the forms doesn't work in the runtime environment. The message suggested I use a SelectObject before ApplyFilter but that gave me another error.
How do I apply a filter that automatically loads when a form is opened? For example, I have a check box and I only want to load records where the box is checked.
I have an issue trying to apply a filter to a record-set. Here's the code:
Dim choice As String Dim rset1, rset2 As DAO.Recordset Dim dbs as DAO.Database Dim var As Variant
[code]...
Whenever the last line is executed, i.e. rset2=rset1.OpenRecordset, I get the following error message:<<<Too few parameters, Expected 2>.. It used to work before? Maybe an issue with my library?
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
I am trying to create a form with control buttons on the form for all the letters of the alphabet. When a user clicks on the button for A, I would like them to only see records that starts with an "A". I assume that I should apply an event to the button's OnClick-property, with a filter, but I can't seem to get it right...any suggestions would be very much appreciated!
Hello everyone. I am having trouble with applying filter on 2 date fields in form. I have succeeded by applying fiter on report by Date, but I just can't seem to work it out on Form! I believe there has to be something to do with the DoCmd code.
I have a main form (frmRate) which has fields (txtDate & txtValidity) that contain dates. I have a subform called (frmSearchRateCustomer) which has 4 fields (txtStartDate, txtEndDate, txtStartDate2, txtEndDate2) where the data range should be filled in as search criteria. I have also an additional combobox (cboCustomer) where user can select customer as a search criteria as well. I have a button that has to do the Search in frmRate. The combobox criteria works very well, just the date filtering is not working. I am pasting my code as follows:
Code:Private Sub cmdSearch_Click()On Error GoTo Err_cmdSearch_ClickDim strCustomer As StringDim strFilter As StringDim stDocName As StringDim strForm As StringDim strField As String 'Name of your Order field.Dim strWhere As String 'Where condition for OpenReport.Const conDateFormat = "#dd/mm/yyyy#"Dim strField2 As String 'Name of your Arrival field.Dim strWhere2 As String 'Where condition for OpenReport.Const conDateFormat2 = "#dd/mm/yyyy#" strForm = "frmRate" strField = "txtDate" strField2 = "txtValidity" ' For the Order Date Search Criteria Date range If IsNull(Me.txtStartDate) Then If Not IsNull(Me.txtEndDate) Then 'End date, but no start. strWhere = strField & " < " & Format(Me.txtEndDate, conDateFormat) End If Else If IsNull(Me.txtEndDate) Then 'Start date, but no End. strWhere = strField & " > " & Format(Me.txtStartDate, conDateFormat) Else 'Both start and end dates. strWhere = strField & " Between " & Format(Me.txtStartDate, conDateFormat) & " And " & Format(Me.txtEndDate, conDateFormat) End If End If ' Debug.Print strWhere 'For debugging purposes only. ' For the Arrival Date Search Criteria Date rangeIf IsNull(Me.txtStartDate2) Then If Not IsNull(Me.txtEndDate2) Then 'End date, but no start. strWhere2 = strField2 & " < " & Format(Me.txtEndDate2, conDateFormat2) End If Else If IsNull(Me.txtEndDate2) Then 'Start date, but no End. strWhere2 = strField2 & " > " & Format(Me.txtStartDate2, conDateFormat2) Else 'Both start and end dates. strWhere2 = strField2 & " Between " & Format(Me.txtStartDate2, conDateFormat2) & " And " & Format(Me.txtEndDate2, conDateFormat2) End If End If If IsNull(Me.cboCustomer.Value) Then strCustomer = "Like '*'" Else strCustomer = "='" & Me.cboCustomer.Value & "'" End If ' Build filter string strFilter = "[txtCustomerName] " & strCustomer DoCmd.OpenForm strForm, acNormal, , strWhere ' for date DoCmd.OpenForm strForm, acNormal, , strWhere2 ' for date stDocName = "frmRate" DoCmd.OpenForm stDocName, acNormal ' Apply filter to report With Forms![frmRate] .Filter = strFilter .FilterOn = True End WithExit_cmdSearch_Click: Exit SubErr_cmdSearch_Click: MsgBox Err.Description Resume Exit_cmdSearch_Click End Sub
I have used the same code as I have used for my Report, just changed few things like rpt --> frm etc...
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I am trying to filter a subform based in a combobox. What im doing wrong, is it the Sintax? This is what i have so far..
Private Sub Buscar_Click () Dim strFilter As String strFilter = Me.CombNomes.Value Me.subfrmBANCO.Form.Recordsource = "[Nome]=""&strFilter&""" Me.subfrmBANCO.Requery End Sub
'subfrmBanco is a subform based on a table called "BANCO"' '[Nome] is the field in BANCO that im trying to filter on 'CombNomes is the combobox im using as filter parameter
I Have 2 combo box on a form: Product_Type (6 values) and Product_Name (30 values and each belongs to a type), I want to narrow down the Product_Name to related Product_type whenever I select a type in the first field. Is there anyway to do this?
I'm creating a database about Vets and I need to make a button on my menu form that will open something like message box that will allow me to type in something (in my case Customer ID) which will then apply the filter on the customer form and allow me to do edits. I have only done the macro that will open the customer form but can't figure out how to do the filter part.
I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.
I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.
In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.
However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.
I've got a form that takes the members from my members table and allows me to take attendance. I have it set up with toggle buttons in the footer (so we can see what class we're currently looking at) and I want to apply two filters when we click on a button. The two filters are "SS_Roll = Yes (or True)" and "SS_Class = AD1 (or whatever the class is)". I did some research and found one code for it, but now that I'm getting the missing object error and upon further research, I'm starting to think the code I found was only an excerpt. Below is the code I currently have. It highlights the first line when I hit debug.
Code:
Private Sub OptAD1_Click() Table![MembersTable].FilterOn = True Table![MembersTable].Filter = "[SS_Roll] = " & True And "[SS_Class] = " & AD1 End Sub
I am pushing some data to Excel from an Access query. When the data is in Excel I reformat the sheet by changing the fonts, applying borders and cell formats - I have got all of this to work fine.
The one thing I am struggling with is applying conditional formats. I am pretty sure it is something to do with incorrectly referencing the applcation/sheet. An extract of what i think to be the key parts of the code are below.
.... Dim ApXL As Object Dim xlWBk As Object Dim xlWSh As Object ...
Set ApXL = CreateObject("Excel.Application") Set xlWBk = ApXL.Workbooks.Add ApXL.Visible = True
I have created forms for inputting into my database.
First of all a form opens with a choice of opening up another form displaying certain tables to input into.
On the startup form there is also a text box for the user to type in text and then using a command button filter the next form with what they have typed in.
Firstly when they dont enter anything into the text box but still press the command button this error box appears "Syntax Error (missing operator) in query expression '[Last Name]='." Then it just has an ok box
How do i get it come up with the message "Please enter a Last Name before clicking run" And then an OK
Secondly, once someone has entered the last name in the text box, pressed the command button, and the filtered form has opened and displayed the results, and then they close the results form and return to the original startup form. The text they entered in the text box is still there. Is there anyway of clearing it each time when they close the filtered form.
Hello All I have an issue I am trying to resolve and I need some help.
I have a database that I just created in access and pulled in data from an old Approach database.
When I try to do a filter on Form it gives me an error and closes out. I sent the error report to Microsoft and they said to intall the updates. I did that and restarted and still I have the issue of not being able to filter on the form. I have other forms in this database and I can do it on them, but not on the main form.
Ok heres the situation, Ive had to edit a piece of code that worked fine filtering but wouldnt allow me to refresh a subform on the main search form. Now im using OpenArgs to pass the Selected bike ID to a popup form. This bike ID should then be used to filter the pop up form. But i get error 2001 (You cancelled the previous operation) when the code is run. The Code follows:
Private Sub cmdSell_Click()
Dim stDocName As String Dim stLinkCriteria As String
I have a cross-tab query that is filtered on user-defined date range using a where condition of:>[Forms]![Reports_Menu]![txtFilterDateFrom] AND <[Forms]![Reports_Menu]![txtFilterDateTo]
the Query functions perfectly. The report based on that query, however, only functions with a DateFrom that is before 1/28/14 and a DateTo that is after 2/27/14. If I enter a date in either field that is outside of those ranges, I get the following error:The Microsoft Access database engine does not recognize " as a valid field name or expression.I have defined both of my Query Parameters as Date/Time in the Xtab query design.
I am using a combo box to filter a 2nd form upon clicking a button. I posted on this topic the other month and was given some code that works. I am attempting to tweak it for another part of my database.I am receiving a Run-time error "3464': Data type mismatch in criteria expression.