I'm adding to a database that someone else set up. I went to the Design View page and clicked on one of the buttons at the bottom to add a text box etc etc. It all looks fine, but the field doesn't seem to be active - if I add some text into it for one page of the databse, the same text appears on every page of the databse. I notice that my "new field" is not listed in the fields list. How do I add it? I keep looking through "The Missing Manual" but without spending 3 days reading the whole thing (which I don't have time for) and learning much much more than I need to know just to get to the part that I need to know, it isn't helping me much.
Please can anyone enlighten me? My email is stu_paranormal@yahoo.co.uk
I am looking for a little help getting a database created in access 2000 to open in access 2003. The creater of the database put security on it and I have the security doc. However, I do not know how to give permission to open the database in 2003.
Hi, I am fairly new to doing DBA, and I am having trouble adding a new column to a table that is existing. Is there any simple way to do this or does it have to be done throught code? And if so how. Thanks zorter8
I have successfully used the recommended way to display images from a folder in a form as posted on the microsoft website.
http://support.microsoft.com/kb/210100/
These instructions were for Access 2000. I noticed that there are seperate instructions for doing this using Access 2003.:
http://support.microsoft.com/kb/285820/
My questions are: 1. If multiple users access this database using different versions of Access (2000 and 2003) will it not work for some? 2. do i have to modify code if i update to 2003?
My database has 4 tables. Table 1 is assembly line 1 data. Table 2 is the sizes for assembly line 1. Table 3 is assembly line 3 data. Table 4 is the sizes for assembly line 2.
The table data comes from another program - they are reimported regularly and so I cannot change, add or delete fields from these 4 tables.
I have to change tables 2 and 4 to crosstab queries and then create 2 queries that join 1+2, 3+4. That's easy enough, no problem.
But then I have to UNION queries 1+2. While 95% of the fields are the same, the most crucial are not - the sizes. Assembly line 1 has 5 less sizes than assembly line 2. I need ALL of the sizes to show in the combined query.
I need to add these 5 fields without adding them to the tables. I did manage to create a crosstab query that included the missing sizes, but now I have a 1 in those fields where I need a NULL or Zero value.
I have two database applications and they are: - the (A) application is for administration use. - the (B) application is for normal users use.
the idea is that: I made the (A) application for administrators who have full control over the database objects (tables, forms, queries, and so on ...).
the (B) application I have created for normal users who will have only to use forms to insert some data and display data only.
but the two applications has a respective table called "vacation request" table. where I linked them, so the both administrators and users can share the data.
The real question is that: How can I prevent the users from seeing the database objects in their application. I used the database options which have helped me in hidding the database objectives when the users open the application, but unfortunately they managed to access to the database objects by pressing the special keys.
I would like to have an access to the (B) application when I want to make some modifications to the forms and then lock it from users where they only have to use the forms for requesting vacations and view the vacations.
A few years ago I’ve made an access database on access 2000. The problem is that now I’ve installed the office 2003, and I can’t make the database work properly.
At first says that are missing those files: “tshoot.ocx”, “msioff9.ocx” and “msowc.dll”; so, I’ve copy them from another computer using office 2000 and now only complains about “msioff9.ocx” saying that my database contains a reference incomplete to it.
Is there no other way to convert my database do work properly with access 2003? What can I do?
Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).
Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.
I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.
I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?
Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?
i inherited a database created i believe in access 2000 everytime i need to update a report or what not i must find a machine runnning 2000 how do i go about working on this database with access 2003
I have a little problem, I have a access database that appears to have square boxs in some of the feilds, I presume these are Cr/lf, how the hell do I get rid of them please..
I'm attempting to set up a relational database utilizing a composite key of several data fields. I had no problem doing this with FileMaker Pro yet with Access 2003 I'm having problems. For example, in Design View I select the field names needed for the composite key.
Yet when I click save I get a message "Microsoft Access can't save property changes for linked tables." As a result I'm not able to construct a composite key of the several data fields selected.
Hi,This is my first post here... I hope I am not asking a really stupid question. :)Basically I need to cleanly export an Access 2003 database to a TAB-delimited file... The database in question has 1406 rows and several columns... some cells have nothing in them -- this is a "contacts" database.Long story short, I need to export-out as TAB-delimited (or comma)... I have done this, but when I view my results in Excel, it looks like some things are messed-up... I think there are some tabs hiding around the database that I am not aware of.Any tips on cleaning-up my database for export to CSV (tab/comma)?Also, I have one field that is a dropdown list... When I export it out as CSV/TXT I only get a number and not the actual value of the chosen drop-down... Is this normal? How do I get the actual value and not just the number?Basically, I would like to just normalize this database and get it into a perfect-looking CSV/TXT TAB/Comma delimited file. :)I would be willing to pay for this help... I do not have much cash, but I really want to make sure I get this done right the first time.Many TIA's!Cheers,M
Moving to new computer, both under Win XP pro, Access 2003. New computer is MacBook Air running Parallels. Transferred Access database via an external hard drive. Now the data shows up as Read Only. Is there a procedure to run down the cause and make the data accessible?
I have upsized from Access 2003 to SQL Server 2008 R2 using upsizing wizard. Everything works fine. But I don't see relationship in SQL SErver 2008 R2 if I go to database. But I set relationship in Access 2003 before upsizing it.
Amso I don't see relationship (diagram) in Access 2003 , which I was able to see before.
So do I need to again recreate the relationship amongst the table in Access 2003 Or SQL SErver 2008 R2 ? I thought, if you link tables, everything should be taken care but i don't see relationship structure any more.
I have a requirement to send a email to individual clients via my access database 2003 . I am using the email address of the client in the current open form . I then created a query using the id to filter that particular client, this query then becomes my record set.The content for the email is held in a .txt file , On my c drive . Every things appears fine however the fonts that I select in the .txt file are not being use in the actual email body. I created a word document with my preferred fonts and copied and pasted them into the .txt file but on sending the email the selected fonts do not appear.
I have attached a demo of what I am trying to do . To test enter your own email in the email address field of the form . Note the .txt file is on the C:/ drive.
I have been working on an access 2003 database for four weeks now and have been asked to create a field in a table that allows a user to select mutliple entries from a list. This information in this field of a table needs to be able to be queried and reported on in written and graphical reports.
I have tried and hit a brick wall any help with setting this up would be most appreciated.
I'm stuck in Access 2003 - the group I am working with is unwilling to upgrade due to costs, and I've inherited this database (or I should say, a glorified spreadsheet), so unfortunately I am stuck with the tools that I have to use.
So I have Table A:MemberID (autonumber, Primary Key)
NameLast (Text) NameFirst (Text) TLBeginner (Yes/No) - Training level TLIntermediate (Yes/No) - Training level TLContinuing (Yes/No) - Training level TLAdvanced (Yes/No) - Training level
I have created Query1 with the above table and added in a calculated field which essentially takes the training levels and converts it to a decimal number (basing it off a binary number of the 4-bits/Yes-no fields) with the calculated field below:
So the calculated field works great - Depending what training levels are selected or not selected, I get a range between 0 through 15.
Table B: I want a list of "friendly name" for the different training levels.
TLID (Number, No duplicates) TLFriendlyText (Text)
So what I want to be able to do, is to have Query1, that will pull the training level text (TLFriendlyText) within the query based on the calculated field (TrLevelTxtID). The catch is, I can't seem to create a join between the two tables with the calculated field.
Ideally, I want the final query to pull, [NameFirst], [NameLast] from TableA and [TrLevelTxtID] (from TableB) based on the queries calculated field [TrLevelTxtID].
How best to achieve this with the Access 2003 limitations. Also, this query will only be used for reporting/mail merging so there are no update requirements or concerns.
I have a database with 200.000 records, how I Add Primary Key Field. I'm getting error "File sharing count exceeded..", tried to increase "MaxLocksPerFile" registry , but without success.
I created a database a while ago which has been working just fine, until I wanted to make one addition: an attachement field to one of its tables.
If I do so, some queries don't work anymore and as a result of that, some (sub)forms do not work. The only error I get is: The search key was not found in any record.
When I add an other kind of field (like a text field), the problem does not occur..
When I remove the attachment field again, everything works fine again...
My problem concerns importing a date from a txt file. I've been doing this for years with '97 and 2003 with no problem, but with 2007 I am now getting import errors which I can't resolve. The files, either fixed width or delimited, contain date information in the format ddmmyyyy (without any date separators). After importing I receive an import error message, and the relevant field in the table is blank.
In Access '97 or 2003 I can import date information directly into an Access date/time field by using an import specification where I have set the date delimiter to blank (by default this is set to "/" , so I simply delete this to leave the box empty). Using this method a file containing "25122007" (without the inverted commas) will be imported into Access as a date, and can be subsequently manipulated as date without having to resort to any fancy reformatting tricks. Obviously the import will not be sucessful if the date delimiter in the import spec is left as "/", or set to anything else, eg "." or ":".
But now that I've updated to Access 2007 this is just not possible no matter what I do or try. I can only import a date if the txt data has a separator, and that the same separator is set in the import specification.
In some new databases I have done a couple of workarounds, importing it as text into a text field, then using a CDate(Format(CLng([date]),"00/00/0000")) type expression in a subsequent query, but this is a pain having to do it, a really backward step.
But the real pain is older databases ('97 or 2003) which have been converted up to '07; they no longer work, and there is a lot of redesign to be done unless somone can tell me what I'm doing wrong.
Unfortunately I am not able to change the format of the dates in the data I receive, so the solution has to come from my end (ie Access). Surely Access 2007 should be able to recognise 25122007 as a date? All ideas gratefully received.
I've been happily using various versions of Access since 1994 and I've learnt lots along the way, and have always previously been able to sort out problems that I've come across without resorting to a forum, but I'm now really puzzled by a problem that I have come across in Access 2007. So although this is my first post I certainly wouldn't call myself a newbie. Hopefully I have described the problem accurately (it is realy simple in fact), but very happy to provide more information if required.
if I create an Import Specification, how do I add an extra field in the middle of the field list? All I can see to do is re-enter all fields from the new field downward.
I'm trying to add a record to the members table in the access database located at c:dbmyforum.mdb. So I looked it up and did a copy and paste from an example, and edited it to match what i need. here's what I've got:
Code:<html><body><%set conn=Server.CreateObject("ADODB.Connection")conn.Provider="Microsoft.Jet.OLEDB.4.0"conn.Open "c:/db/myforum.mdb"sql="INSERT INTO Members (SN,Password,)"sql=sql & " VALUES "sql=sql & "('" & Request.Form("sn") & "',"sql=sql & "'" & Request.Form("pw") & "')"on error resume nextconn.Execute sql,recaffectedif err<>0 then Response.Write("No update permissions!")else Response.Write("<h3>" & recaffected & " record added</h3>")end ifconn.close%></body></html>
But it keeps coming back with errors. What am I doing wrong? I'm sure that the info from the form is going through, and I've checked the sql several times, although I'm not sure about the vb script cause I'm new to asp(trying to learn it now).
When I export a report to Excel, a memmo field is truncated to 256 characters. If I export the query behind the report, the memmo field is exported correctly. Is there a way to export an Access 2003 report to Excel and maintain all of the data and report formating in memmo fields?
