Access 2007 Startup Page

Sep 6, 2007

Hi
I've just moved my PC over to Office 2007. I have previously created an application in A2003 that consists of three databases which I move between frequently using command buttons running the following code to close the current one and open the new one:-

Private Sub Command14_Click()
Dim RegSet As New QwestLib.QRegistryFunctions
On Error GoTo Err_command14_Click

DoCmd.Close acForm, "client action", acSaveYes

Application.FollowHyperlink RegSet.sGetMAPRegistry(200)

Application.Quit acQuitSaveAll
Exit_command14_Click:
Exit Sub

Err_command14_Click:
MsgBox Err.Description
Resume Exit_command14_Click
End Sub

In 2003 this worked fine but we always had to enable macros on opening the new one. This is now not required as the application is "Trusted" but in A2007 every time a database opens the "Getting Started with MS Access" window opens.

Is there some way I can switch this off as it is unnecessary and time consuming.

View Replies


ADVERTISEMENT

Access 2007 Startup Properties

Dec 10, 2007

Hi,

I'm trying to migrate an Access 2000 project to Access 2007. I want that the frontend doesn't look like Access. This means: no ribbons, no office button, no Quick Access Toolbar, no database panel. In 2K, this was rather simple, but in 2007 I only managed so far to get rid of the ribbon (by replacing it with a blank ribbon) and the navigation pane, but I can't figure out what to do to hide the Office button and the QAT.
Can anyone help me with this ?

View 1 Replies View Related

Access 2007 Startup Properties

Dec 10, 2007

Hi,

I'm trying to migrate an Access 2000 project to Access 2007. I want that the frontend doesn't look like Access. This means: no ribbons, no office button, no Quick Access Toolbar, no database panel. In 2K, this was rather simple, but in 2007 I only managed so far to get rid of the ribbon (by replacing it with a blank ribbon) and the navigation pane, but I can't figure out what to do to hide the Office button and the QAT.
Can anyone help me with this ?

View 3 Replies View Related

Load Form On Startup In Access 2007

Nov 27, 2006

Hello,

Sorry if this is a really dumb question - I have just started using Access and I couldn't find the answer to this doing a forum search.

I have made a database consisting of a table and a form. All I want to do is get the form to appear automatically when the database is opened. I am using Access 2007.

Many thanks,

Sammy

View 14 Replies View Related

Reports :: Forced Page Break(s) In Access 2007 Report

Sep 30, 2013

I am writing a book, using MS Access 2007 (seemed like a good idea at the time I started, and the report that creates the formatted book content works quite well).

The book content is "per paragraph" which gives me total flexibility to move content to whatever spot in the book I might wish, simply by changing the paragraph number (free field, not auto-number primary).

To save paper (or pages) in printing (or viewing) the book, I have the report printing off para by para (as many whole paras as will fit to a page). This is fine but I want each new chapter to start at a forced new page, for "presentation"/appearance sake.

The relevant fields for the purposes of this post are:

paranumber
paratext
chapternumber
forcepageifticked (a Yes/No box), which goes with each paragraph and which I thought might come in handy, I had in mind to link it to a page break control at the top of the "detail" part of the report in design view, and which would be "invisible" except if the report formatting process had got to the start of any chapter, and the Yes/no box was ticked.

View 3 Replies View Related

Forms :: Use Formula In Caption Property For Page In Tab Control (Access 2007)

Oct 7, 2013

Is it possible to use a formula in the Caption property of a page in a tab control (i.e. to make it dynamic)

I have a number of tabs each with their own subform (with each subform driven by its own unique query)

I'd like the tab name to include the number of records returned by that query (so as records are added, the tab name is automatically updated with the new number)

So something along the lines of :

Page 1 (" & DCount("[ID]","[qryQuery1]") & ")"

Such that the page name appears as :

Page 1 (7)

I know I can code this programmatically but then that code has to be triggered by some event and I need the counts to be as real-time as feasibly possible rather than requiring the user to click on a control to trigger it. I was hoping by using a formula directly in the Caption property of the page, it would be dynamically updated every time a new record was added without the need to trigger an event first.

View 2 Replies View Related

Adding Video In Startup Page?

Jul 2, 2014

adding a video in my startup page its like a introduction video.....how to add a video in access.

View 1 Replies View Related

Data Access Page Filter Refresh The Page

Dec 30, 2007

Hi All,

I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.

MSODSC.DataPages(0).Recordset.Filter="AppID = 3";

My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.

How can I stop the page refresh itself?

Thanks and Happy New Year!!

View 1 Replies View Related

Access 2007 Crashes On Excel 2007 Import

Mar 21, 2008

On trying to import an Excel 2007 file into Access 2007 I get the following:

1) Choose "External Data," Import, Exce
2) Select small file in MS Excel 2007 format.
3) Click on Import the source data into a new table ...
4) Choose OK

Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.

Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.

Event Viewer gives following message, which is of no help:
"ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."

Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.

I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.

I have turned off DEP.

How can I get MS Access 2007 to import Excel?

Thanks

Ken

View 6 Replies View Related

Access 2007 Runtime Not Visible In Access 2007

Nov 26, 2007

I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features.
Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing!
Help!
I do have Runtime 2002 (XP) on the same PC, is that relevant?

View 10 Replies View Related

Access & Startup Settings

Apr 12, 2007

I have been looking all over for this function in MS Access 2007. Anyone have an knowlege on how to access the Startup section?


Thanks a bunch, :D

~Kilch~

View 2 Replies View Related

Access StartUp Problem

Jul 26, 2007

I have a problem where i unchecked the "allow built in toolbars" , "allow toolbar menu changes","allow full menus" and " allow default shortcut menus" from the TOOLS Menu item (STARTUP)
How do i get back all the menus to show when the application starts up?

View 2 Replies View Related

VBA Code To Set The MS Access Startup

May 30, 2005

Hello to everyone!, Could I ask a help how could I possibly code MS Access Startup to set the MenuBar, ShortCut Menu, FormMenu, Special Keys to OFF to prevent user from using these keys when my application starts?

Thanks for your help...

View 1 Replies View Related

Microsoft Access Startup/Pop-up Questions

Jul 27, 2006

I have a database that will be used by a few users who are not very comfortable with Microsoft Access. I have a login screen and a introduction/splash popup. I was wondering if it is possible to bypass the Microsoft Access pop-ups that ask the user if they want to "block unsafe code.." or The security popup that says "This file may not be safe" so that the users go right to the login screen I created within the database. I am worried that there will be variations in answering/clicking these Microsoft Access questions thus causing a variety of complaints when trying to access the database. Thank you

View 1 Replies View Related

Access Startup Security Warnings

Mar 26, 2008

I thought I had this figured out, but apparently am still missing something...

When I start my DB, I get the default 'Security Warning' message every time asking if I want to cancel or continue... I thought this was an options setting under the Tools/Macro/Security setting. However, when I change this setting (default is Medium) to Low, exit Access and restart the DB I get the same warning message and the security setting is back to medium.

Am I in the right area to fix this? Why would my settings default back?

Thanks

View 14 Replies View Related

Start Up MS Access From Vb And Bypass Startup Macro

Jun 14, 2012

I know that I can startup MS-Access manually and bypass the startup options, including any macro that is set to run automatically, by holding the Shift key down when launching the application. I have:

Code:
Public Sub AccessStuff()
Dim myaccess As New Access.Application
myaccess.OpenCurrentDatabase(" orfs006slsops_repts\_RS DevSOPSOP.MDB")
Dim db = myaccess.CurrentDb()
End Sub

which works nicely and opens the database just fine. However, this mdb has a startup macro defined in it. I can't hold down the Shift key since I'm doing this from a program. In this case, how can I bypass the startup macro?

View 7 Replies View Related

Reversing Startup Settings With Passworded Admin Access If Possible?

Mar 19, 2007

Thought I best ask this question BEFORE I run into trouble.

If I were to set my database to hide the database window and all menus on startup so that users can only do what I want them to do and not edit anything. How do I go about reversing this if I needed to edit something as I would not be able to see any of the regular menus?

It would be good if the solution involved some sort of admin password rather than a sneaky short cut that a user may accidently stumble across.

View 5 Replies View Related

How Can I Run MS Access Program Automatically From The Startup, Show It In Sys Tray

Jun 3, 2007

I developed a program. Would you please teach me how to run it automatically when the computer restarted, through the startup.

Plus this I want to let this program run through the system tray, and not shown in the the Taskbar, if this feature is provided by MS Access 2003

Thankful...

View 6 Replies View Related

Forms :: Access 2010 - Hide Menu On Startup?

Feb 4, 2015

Well, I made the move and am using Access 2010 now and I am running into a couple issues.

First off, I want to get rid of this menu on startup:

Not sure what it's called (ribbon, menu bar, etc). I am able to hide it using

DoCmd.RunCommand acCmdWindowHide
DoCmd.ShowToolbar "Ribbon", acToolbarNo

...in the OnLoad event, but this only works when running the opening form from the form list. When the form runs at startup the menus do not hide.

Also I would still like to have the file menu available because sometimes the user need to access the print menu to choose an alternate printer.

View 14 Replies View Related

Can Office Access 2003 Runtime-Based Solutions Applies To Access 2007?

Jan 29, 2007

Hello,

I have installed Microsoft Access 2003 and Microsoft Access 2003 Developer Extensions. I can create Access application by using the Package Wizard.
But after I upgrade from Microsoft Access 2003 to Microsoft Access 2007.
I can't use the Package Wizard.

How can I do to solve this?

Thanks.

View 1 Replies View Related

Table Problems Moving From Access 2003 -> Access 2007

Jun 19, 2007

Attached is a screenshot of the relationships in a database I built a couple of years ago. It's worked absolutely fine in Access 2003 and currently has over 18,000 customers with associated information in it.

However, when I open the database in Access 2007 the performance is awful. All the forms are very slow to respond when tabbing between form elements. I've experimented by reducing the number of form elements calling on related data on a given page and whilst this improves performance it reduces usability - something I don't want to compromise on especially since Access 2007 should be able to cope with this.

My next question is therefore whether I've got the most efficient underlying table design and I can't see any other way of doing it than my current method so I'd be grateful for any feedback or advice anyone has.

View 2 Replies View Related

Access 2003 To Access 2007 Split Database

Mar 8, 2007

Hi All,

Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).

Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.

I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.

View 4 Replies View Related

Problem Running Access 2007 And Access 2002

Mar 27, 2007

Having a problem here after installing 2007. All my previously created databases work fine in 2007 (after clicking the enable, which is a pain,but don't know any other way) When I return to 2002 and try to open the databases I get different errors all something like this on....... "The expression On Open you entered as the event property setting produced the following error: Object or class does not support the set of events. Whats up here?????I have found a site here...http://allenbrowne.com/bug-17.htmlMentions this problem,but refers to Vista..... Does the same apply to XP? And which is the best fix?

View 7 Replies View Related

Access 2003 Database Not Functioning In Access 2007

Mar 30, 2007

Hi

I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?

Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?

Any help greatly appreciated.

Thanks

Steve

View 1 Replies View Related

Lost Menus In Access... No View Or Tools After I Messed With Tools/Startup

Dec 17, 2004

I wanted a Switchboard page in Access to open automatically when the database was opened. I've done that but, as I did it, while in the Tools/Startup to set Display Form Page (in this case a switchboard page but it's not opening full screen and I ow have no way of editing anything), I stupidly de-selected the options there...
Display database window, Display status bar, Allow built in tool bars allow toolbar/menu changes.

Now I have lost the tools Menu, the View Menu and others (where one sees, File, View etc at the top of the window) and I can't work out how to get them out. I can no longer view my Access pages in Design View so I can't amend the any pages.

Can anyone tell me how to get my View and Tools menus back on my Access app window?? It's a bit of an emergency... been up all night and have to hand this in as coursework at uni in about 3 hours and I've screwed up right at the end and can't do the last couple of things before putting it on a CD for my tutor to mark.

Help!

I'd also like to know how to get it to open the first form at full screen.

Thanks.
Ceri

View 1 Replies View Related

Access 2007 And Access Developer Extension

Nov 29, 2006

Hello friends.

Do you know anything about a new Developer Extension for Access 2007 ?

Thank :) :)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved