Access 2007 And Menus
Feb 26, 2008
Hi all,
After searching through the "search" field, I realize lots of us are having problems with the menu's in access 2007.
After converting my 2003 DB to 2007, my menus are still there, but displayes as Add-ins instead of as the menu bar. I can't find any options to change during the conversion.
I have tried importing my Logon window with the options "menus and icons" clicked, but this didn't change anything.
If I open the DB in 2003 Format, then go to the options in Access 2007 I can choose the menubar, but if I convert to 2007, the menubar is only available as add-ins. Is there any way round this?
Appreciate any help - it is so time consuming trying to figure this out - and I seem to go round in circles, ticking options on and off... perhaps some dear soul has already found the answer!
View Replies
ADVERTISEMENT
Dec 14, 2007
:eek: Our office is planning to switch over to MS Office 2007 including Access 2007. I've just been looking into converting our Access 2003 databases to the new version. One thing I noticed about the datasheets appearing as subforms is that each field header/label/caption/column selector thingie has a dropdown menu. The down arrow of the dropdown menu takes up valuable realestate where the field name is being displayed.
Question:
Is there a way to turn off those individual datasheet dropdowns and get rid of the arrows so that the form doesn't have to be redesigned, due to increased column width considerations which the down arrows cause, just to display the full field labels as they always have been in Access 2003?
Thanks in advance for any help!
Cheers!
Goh
View 9 Replies
View Related
Mar 21, 2008
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce
2) Select small file in MS Excel 2007 format.
3) Click on Import the source data into a new table ...
4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help:
"ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I have turned off DEP.
How can I get MS Access 2007 to import Excel?
Thanks
Ken
View 6 Replies
View Related
Mar 22, 2008
Hi, I have hidden all the menus and added one of my own custom menus to a DB that I was creating. That DB has been completed. Now when I open a blank DB to commence again, I have the same hidden menues and my one custom menu. Is there away in Access 2003 that I can replace the template, for example, MS Excel and Word have .dot and personal.xls. Is there an easy way to bring them all back. I checked in startup for a restore defaults, however this does not work. Any ideas. Garry
View 1 Replies
View Related
Nov 26, 2007
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features.
Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing!
Help!
I do have Runtime 2002 (XP) on the same PC, is that relevant?
View 10 Replies
View Related
Nov 14, 2006
I started access today and all my icons and menus are gone from the interface. I am forced to right click on all my queries and tables to perform any action. All I have at the top of my window is the usual "Microsoft Access" caption. Absolutely nothing else. Other than that, Access is fully functional provided I can use the right click commands. Has anyone encountered this? Help!
-Nino
View 14 Replies
View Related
Dec 18, 2007
I have set up a secured database using access 2003 which I want to roll out to users who will only have access runtime installed on their pc's.
The problem is there are some additional options that I want to add to a new menu (export, change password etc) that I need them to be able to view in runtime - when I set up a new menu in access 2003, it doesn't seem to be visible on anybody else's PC when they are logged into the database regardless of whether they have full access or runtime.
Can anybody help?
Many thanks
View 3 Replies
View Related
Mar 14, 2006
I have developed an application and packed it into a runtime version.
However, in the runtime version the shortcut menus do not work. The reason why I want the user to have that possibility is that the application has two hyperlink fields and it is much easier for the users to be able to browse to the documents instead of typing each link with all the errors that might give as well.
Any help would be appreciated.
View 4 Replies
View Related
Jul 18, 2014
How I can create an MDE with all options disabled including shift key bypass.
I want to remove all options in Tools>Startup except for the status bar.
I have tried using this code but am not getting anywhere with it
CurrentDb.Properties("AllowByPassKey") = 0
View 8 Replies
View Related
Oct 11, 2007
Hi..
I got a access file from a friend of mine, but when i open it in access, i don't see any tables or the standard menu buttons.
The only menu i see, is a docked menu with a couple of submenus, wich in turn open forms, where you can enter data..
How can i see the tables and bva script behind this access file?
I tried F11 and Alt-F11, but is does nothing.
He won't tell me how he did it, because he doesnt like to share what he knows...
Can anyone help me??
Thanx !
View 6 Replies
View Related
Sep 24, 2013
I recently completed a db for a client and they have since asked that the access window be hidden for certain types of users.This I did using
Code:
ShowWindowAsync Application.hWndAccessApp(), SW_HIDE
if a relevant user opened the db. All well and good, except they then wanted to be able to see the Access link in the taskbar (which SW_HIDE doesn't do) - so I changed it to SW_MINIMISE and they were happy again until..They then realised (and it was a surprise to me as well) that the right click context menus used to filter and sort continuous or datasheet forms were no longer available to these users - nor was the context menu for datasheet columns to freeze or hide columns - see attached.
I've experimented with a number of options and these context menus are available if ShowWindowAsync is not called or if called with SW_HIDE, but not for SW_MINIMISED, SW_SHOWMINIMISED, SW_SHOWMINNOACTIVE, SW_SHOWNOACTIVE.
Why the shortcut menus are not available when the Access window is minimised? The requirement being that the context menus are available to all users the Access link appears on the task bar for all users the access window is hidden for some users.I should say that due to hiding/minimising the access window all forms are popup and modal.
View 1 Replies
View Related
Dec 17, 2004
I wanted a Switchboard page in Access to open automatically when the database was opened. I've done that but, as I did it, while in the Tools/Startup to set Display Form Page (in this case a switchboard page but it's not opening full screen and I ow have no way of editing anything), I stupidly de-selected the options there...
Display database window, Display status bar, Allow built in tool bars allow toolbar/menu changes.
Now I have lost the tools Menu, the View Menu and others (where one sees, File, View etc at the top of the window) and I can't work out how to get them out. I can no longer view my Access pages in Design View so I can't amend the any pages.
Can anyone tell me how to get my View and Tools menus back on my Access app window?? It's a bit of an emergency... been up all night and have to hand this in as coursework at uni in about 3 hours and I've screwed up right at the end and can't do the last couple of things before putting it on a CD for my tutor to mark.
Help!
I'd also like to know how to get it to open the first form at full screen.
Thanks.
Ceri
View 1 Replies
View Related
Jan 29, 2007
Hello,
I have installed Microsoft Access 2003 and Microsoft Access 2003 Developer Extensions. I can create Access application by using the Package Wizard.
But after I upgrade from Microsoft Access 2003 to Microsoft Access 2007.
I can't use the Package Wizard.
How can I do to solve this?
Thanks.
View 1 Replies
View Related
Jun 19, 2007
Attached is a screenshot of the relationships in a database I built a couple of years ago. It's worked absolutely fine in Access 2003 and currently has over 18,000 customers with associated information in it.
However, when I open the database in Access 2007 the performance is awful. All the forms are very slow to respond when tabbing between form elements. I've experimented by reducing the number of form elements calling on related data on a given page and whilst this improves performance it reduces usability - something I don't want to compromise on especially since Access 2007 should be able to cope with this.
My next question is therefore whether I've got the most efficient underlying table design and I can't see any other way of doing it than my current method so I'd be grateful for any feedback or advice anyone has.
View 2 Replies
View Related
Mar 8, 2007
Hi All,
Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).
Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.
I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.
View 4 Replies
View Related
Mar 27, 2007
Having a problem here after installing 2007. All my previously created databases work fine in 2007 (after clicking the enable, which is a pain,but don't know any other way) When I return to 2002 and try to open the databases I get different errors all something like this on....... "The expression On Open you entered as the event property setting produced the following error: Object or class does not support the set of events. Whats up here?????I have found a site here...http://allenbrowne.com/bug-17.htmlMentions this problem,but refers to Vista..... Does the same apply to XP? And which is the best fix?
View 7 Replies
View Related
Mar 30, 2007
Hi
I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?
Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?
Any help greatly appreciated.
Thanks
Steve
View 1 Replies
View Related
Nov 29, 2006
Hello friends.
Do you know anything about a new Developer Extension for Access 2007 ?
Thank :) :)
View 1 Replies
View Related
Dec 17, 2007
I have created a database in Access 2007 that now works well, and one that I'm quite proud off. However, I can easily convert it to an Access 2000 format as can anyone else here, but when I load it up there is a major problem.
I have used the tab control in my main form and that has three tabs on it. However, it's positioned correctly in Access 2007 it's not positioned correctly in Access 2000 as I have to move the tab control down a bit, but that would seem fine. So I lowered the tab control form and changed my form layout slightly, but even then the tab control over all over the Access 2000 form whenever I interact with the tabs - most bizzare.
Any help? Thanks.
View 3 Replies
View Related
Mar 18, 2006
I recently heard that Access 2007 ( part of MS Office 2007) can be purchased as a stand alone program. This sort of confirms that : look at pricing breakdown on : http://techrepublic.com.com/5254-6257-0.html?forumID=99&threadID=174062&messageID=1961442&id=3053951
Anyone done this already ?
View 4 Replies
View Related
Sep 5, 2006
Interesting article. Especially the Macro / Security thing. I saw some pretty extensive demo's last week and the UI was real different...
Link (http://msaccess.advisorguide.com/doc/18229)
View 12 Replies
View Related
Dec 25, 2006
Hi,
I have downloaded Access 2007 trial, but I don't know how to use some of its features. When I try to open any of my databases saved as A2000, it displays a security message. "Security Warning: Certain content in the database has been disabled"
Is there any way to disable this message?
Any help will be very much appreciated.
B
View 2 Replies
View Related
Mar 5, 2007
Hi, I have downloaded the access 2007 trial. Installed and registered it with the trial code. However when I try to install any of the free sample dbs from MS including the northwind db, Access crashes!! I was going to purchase the full version of office, but wanted to test access first. If anyone knows a solution, or can email the northwind 2007 db it would be appreciated.Many ThanksP.S. Screen dump of error is included.
View 12 Replies
View Related
Mar 29, 2007
I read this article from Allen Browne http://allenbrowne.com/Access2007.html#Bugs Has anyone had any problems with 2007, data, tables, etc. Our company would like to install, but after reading this, just second guessing myself. We have not yet installed the SP1. The company is gang ho about running with 2007.
I just don't know enough about it yet.
Please give me your thoughts.
View 1 Replies
View Related
Jun 4, 2007
Hi
I currently have access 2007 and am wondering if i can run a finished application database window without all the baggage...
The reason is we run a access backend and a vb frontend data base at work its seems to run alone...works ok
Ive got the job to take over the database and am new to access and vb.
can i use access and package it like vb?
View 2 Replies
View Related
Jul 13, 2007
I have Access '95 and wish to upgrade to Access 2007 (XP).
Will I be able to convert my database directly, or is there some way I can convert it indirectly. ie by converting it to an earlier version first?
View 5 Replies
View Related
