A form that used to automatically open when the db was launched has been deleted. However, the instruction to load the form is still in the db. I would like to remove that instruction, but I can't seem to find where to look for that code. In Access 2007, I went on DB to the Database tool menu, but its not in the switchboard manager.
View RepliesHi,
When the user clicks on the file name, I want the form to load automatically & also at the same time minimize the database window (i.e. the window where all the tables, queries etc are listed). Any suggestions?
Thx in advance,
Jatz
I am having a hard time with this project that I'm working on at the moment.
I have created a modal dialogue form that has a macro set to open another form and close the current form at the same time. The form that is being opened has textbox controls that have the default value set to hold the data that is in the textbox controls in the modal dialogue form that is closing. The problem is, is that when the modal closes, the controls in the next form display #Name? and the data is not copied to the next form.
I am having a problem running Access 2007 runtime on a workstation. I have set up the 2007 database (.accdb) on our server and am able to connect to it and open it from the pc that has Access 2007 full version installed and it works fine.
I also installed Access 2007 runtime on another PC and was able to open the database using the runtime version just fine.
However, on this other PC, I installed the runtime version, and when I use the command line (msaccess.exe /runtime \serverdirectorydatabase.accdb) to open the database in runtime mode, Access opens for a split second and then closes immediately.
When I just run msaccess.exe, it opens the runtime version and says that I have not specified a database, as expected. So, I am wondering why it is not opening the database when i DO specifiy the database.
If i specify an incorrect directory for the database, it opens the runtime version and a dialog appears telling me that a database was not found, and upon clicking OK, the program closes.
I can say, that when I run it off the computer that works through the runtime version, I get a security warning telling me that there are potentially unsafe elements in the database, but i just have to click OPEN and it still opens it fine.
Perhaps the non-working PC is denying it access due to these security issues?
I can't seem to figure this out, and any help is appreciated.
How can I get a form to open when the database opens?
View 5 Replies View RelatedUsing Access 2010.I purposely disabled the Access Objects to open when the database opens of fear of someone messing with my data. This works. The problem I'm having is when I use the print button (access macro) on one of my forms, as soon as i click the button, the "all access objects" window opens on the left side navigation.Is there a setting that will permanately stop this from opening?
View 3 Replies View RelatedHi,
I've been given an existing database to modify, and I'm struggling somewhat to see how the author has implemented certain functions.
On a main menu form (autoexecs on starting the database), there are various "Search By" option buttons to generate a report, ordered in various ways. The "On Click" field for each of them refers to a macro, called Buttons, and a line in that macro dependant on the type of search (e.g. OnClick = Buttons.byPerson).
The Buttons macro runs an OpenReport command, the report corresponding to the search type (e.g. Buttons.byPerson has an OpenReport command for the "Report by Person" report).
However, when I click the search buttons (or indeed run the corresponding reports) I instead get another form which allows the search criteria to be specified - this then generates the report (I would assume based on the relevant query - e.g. Person Query), but I cannot understand how this works.
Google searches have not helped much as I can't seem to find an adequate search phrase to use, and I've been staring at the thing for some hours now. Any help getting me off in the right direction would be much appreciated!
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce
2) Select small file in MS Excel 2007 format.
3) Click on Import the source data into a new table ...
4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help:
"ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I have turned off DEP.
How can I get MS Access 2007 to import Excel?
Thanks
Ken
I have a Form called X which contains a subform called Y. I have placed this Form inside another form called Z.
There is a CommandButton which when clicked must refer to the Subform. How do I do this?
I tried using [Z]![X]!Y, Form_Z.Form_X.Y, [Z]![X].Y but it throws an error saying the form name has been misspelled ...
Hi,
I have installed Access 2007 and I have tried to run my
program written in access 2003 and 2000. It seems to work with a few bugs but my biggest concern is about one particular form. When I open it, I can see the headers but no data. Of course the query from this form is not empty.
At the bottom of the form, I have a total of the records and other calculations but the data are not visible. ( In access 2003, there was of course no problems)
What is very strange is that other forms of my program are well visible.
Any suggestions?
Thanks
Daniel
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features.
Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing!
Help!
I do have Runtime 2002 (XP) on the same PC, is that relevant?
Hello,
Sorry if this is a really dumb question - I have just started using Access and I couldn't find the answer to this doing a forum search.
I have made a database consisting of a table and a form. All I want to do is get the form to appear automatically when the database is opened. I am using Access 2007.
Many thanks,
Sammy
Access 2007 is behaving very peculiar concerning sizing of forms. For example, some open at an enormous size (25 plus inches) when the width size in the property box is 8 inches. I've tried various combinations of Auto Center, Auto Resize and Fit To Screen -- all with bazarre, unpredictable results. Does anyone know if there is an "issue" (bug) in Access 2007 Trial concerning form sizing? Thanks.
View 8 Replies View RelatedI have a button which runs some VB, it brings up various message boxes as it prints a report to file, runs a query etc etc. I am hoping to display a basic form, which simply covers most of the screen and states "Please Wait" or something. I have already built the please wait form (frm_please_wait) and have set it to pop up. I have added it to my VB to open before I run the queries/output to file however the messages still appear on top..
How can I force the form to display on top of everything else in access ( it is only visibly for a few seconds, depending on the spec of the pc).
When printing a form (record) in Access 2007??????? When I go to print preview the form displays (and wants to print) every record!!!! How do i get only ONE record to display and print..
View 1 Replies View RelatedI have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
I am running access 2007 and have a continuous form that I am trying to filter. The table that I am pulling the data from has the following fields: Order_Date, Order_number, Model.
I want to filter based on Order_Date.
I tried creating an "after update" Macro builder on my combo box and using "Apply Filter" but I cannot seem to get my syntax right.
Filter is the name of my combo box
Here is my current setup:
Filter Name:
Where Condition: [Order_Date] Like [Filter]
Control Name:
However whenever I select a new date from my combo box it asks me to "Enter Parameter Value" for Filter, which I don't understand because my combo box name is Filter. I would think they would link up.
When one user opens his ACCESS file, it opens in Notepad. He uses ACCESS 2003.
Now he has to right click on that file (on windows explorer) and select open with 'MS Access' to make it to work.
Any one knows how this setting can be changed to open with MS ACCESS?
I have a pesudo forum running on a server which sends emails automatically to a group to indicate that there is a new posting - much like any forum...
I would like to include a link in the email (automatically) that will open the Access Forum and point directly to the relevant post...
I searched the forum but was surprised to find that this question hasn't been raised before... so I'm worried? :p
I know I will get a hundred links from the Mighty Moderators now saying I didn't look properly - as my old mother used to say :rolleyes:
Dave Eyley
Im working in Access 2007.
So i have query based on 1 table that populates a Form. The primary key for that table is Entity ID. Therefore once the query has been run I have multiple records that i can scroll through in my form distiguished by their Entity ID.
I have a second table that has a Entity ID column, AFE Available column, and many others. The primary key for this table is called Match ID. This table contains records that have the same Entity ID.
My goal is to display on the form the Sum of the "AFE Availible" for each Entity ID. so as you scroll through the records the Entity ID is changing and you are able to see a the Specific "AFE Availible" Sum related to the current Record showing on the form.
I couldn't figure out a way to have a query based off both tables where the records are only uniquely defined by the Entity ID in Budget Info. What was happening is the query was displaying all the records that had the same Entity ID because of the AFE Spent table. That way when you scroll through the records the form shoes records with the same entity id.
Maybe im doing it all wrong and you dont need the tables attached to the same query. That would make it easier i think. So you would have two queries populating different text boxes on a form. Is that even possible?
I have been asked to create a database very quickly for a small group that needs to scan multiple pages into an Access 2007 form. They they would like all scanned documents to be converted to PDF and stored on a shared network folder which can be accessed by their group. I have tried several ideas posted but, I have been unable to get any to work correctly. Any sample of working database that the scanning portion is working? I am so involved with other projects right now that I just don't have the time to create a scanning process on the database.
View 5 Replies View RelatedI've been using Access 2007 to run queries on a database where we eventually export results as separate Excel spreadsheets for individual clients. The process is quite involved, using queries to change fields from code letters to words and splitting the database up into different client tables, saving the tables under date order and with different client codes.
I now need to pass this role on to colleagues, so need to make everything as straightforward as possible.
I had thought to use a Form as the user interface, with a minimum number of buttons, however I need either the system or the user to amend the date for the initial table, then to use this new table and run a series of standard queries on it, then produce the separate tables.
I don't think I can just use macros behind the buttons, because the database name is changing each time.
I assume some parts will be too tricky to automate - it will be necessary for colleagues to follow instructions instead.....
Is it possible (and how...) to declare a module-specific form variable (or any variable for that matter) at the top of said module, so it doesn't need to be set at the start of each subsequent procedure?
I have a module of code specific to one form with a number of procedures, each one of which requires me to Dim / Set the form variable. It would be much neater if I could do it once at the start.
Code:
Option Compare Database
Option Explicit
Public Sub Populate(lngParameter As Long)Dim frm As Form
[Code] ......
I'm working with Access 2007 and am trying to make a form with multiple tabs that will update when a certain business name is selected in the combo box at the top of the form. I have tried looking up different codes to make the combo box update correctly but can't find anything. Right now I have this code in my After Update:
Private Sub cboBusinessName_AfterUpdate()
On Error GoTo myError
Dim rst As Object
Set rst = Me.RecordsetClone
rst.FindFirst "[GrowerID] = " & Me.cboBusinessName
Me.Bookmark = rst.Bookmark
leave:
If Not rst Is Nothing Then Set rst = Nothing
Exit Sub
myError:
MsgBox "Record Not Found"
Resume leave
End Sub
Here is a picture of the tabs and combo box.
I have a couple charts that I would like to show on my switchboard. Right now I only have one that is up everytime I open my database. Is there anyway to have it do a random Sub form show up everytime you open the database up? Thank you for your help. Without this forum I would have shot myself a long time ago!
View 1 Replies View RelatedI'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!