I have recently done a fresh install of access 97 to our 2003 server. I load up an access app, it brings up a form with a button...I clidk the button, and it closes the app with no errors, and leaves the ldb file in tact. Checking the event viewer, I get this message:
Faulting application msaccess.exe, version 8.0.0.5903, faulting module unknown, version 0.0.0.0, fault address 0x00202878.
It appears to be on the buttons that open forms / reports, but not those that run queries. Any ideas?
Since we have installed the latest Windows critical security updates, upon closing an Access database, the database gets corrupted. Error code is c000020c.
I did a search on common access errors and other errors that you would want to trap and got the following results:
Cannot update. Database or object is read-only Operation must use an updateable query General error Unable to open registry key Could not find file Could not use '(unknown)'; file already in use Table 'tblTable' is exclusively locked by user 'Admin' on machine 'MyMachine' Too few parameters. Expected 1 Either BOF or EOF is True, or the current record has been deleted Item cannot be found in the collection corresponding to the requested name or ordinal The search key was not found in any record
If you know any extra errors, can you please add them to this list?
Hello everyone. I will admit I am a novice when it comes to access. But I do have some programming background in Lotus Notes. Now maybe its just me but Access seems to error out ALOT and I keep getting messages like:
-File is not a databse -A user unexpectedly shut down access -Some c++ runtime errors
I just dont understand what I am doing wrong. I am saving my work like I would do in anyother program. But at least once a day I have to resort to a backup copy because I keep getting errors like the ones above.
I have created an access 2000 DB and it did the same thing about 2 weeks ago...been doing it at least once a day if not more. I have created new db's and still the same thing. I have even converted it to 2003 and still problems.
For example I created a report and was told I didnt have permission to access the report??....WTF..I am the only user in the db as its in development...I created the db..if I dont have permission WHO does. So I tried to add myself in permissions.....then that when I got the c++ error.
I have been working in Notes DBs for the past 6 years and I have to tell you access doesnt have ANYTHING on notes. I have never had such stupid error out of the blue in any program I have used...I mean just closing the DB is causing an error on some days...
I am so frustrated with this its beyond belief..I have a real hard time turning this crap over to my users when I DONT trust it will be running next week...UGH
Some guidance will be most appreciated as I am about to just drop the project and start from scratch in something else.
My office computer, along with the phone system, printers etc took a lightening strike last week. The hard drive survived but not the computer. I was able to get the office access db onto a new system but now I get errors when running it. When opened, the main menu appears. Whoopee!Not so fast. When I select an item, I get "the expression On Click you entered as the event property setting produced the following Automation error. The expression may not result in the name of a macro, the name of a user-defined function, or [Event Procedure]There may have been an error evaluating the function, event, or macro"
Pressing the button a second time does not produce the error and opens the correct form.This form works properly. The second problem is with a second report form that opens properly.This form expects dates and accepts them but when I try to print the report, access closes with no error message.
this is the code that im using to help me with a listbox and a search text box that is embedded on my main form. it works ok. The problem is, i was trying to link an already filled out Table with data to this interface.
When i key in information from the form it works, but when i just enter stuff through the table (which was already completed and handed to me) When I click in the listbox on the main form the code window just pops up showing this section of my code. Help./
I'm not sure if this is an Access problem or an ASP problem or even an IIS problem, but I have to start somewhere, so here I am. Ok, this is the deal. I've got an Access database that I'm using to store login/password info (just a training thing, I'm new to ASP) and I've successfully created a login form and an ASP page that determines if the username/password combo is correct. If the info is legit, it forwards the user to a success page. If the name is good, but the password is bad it tells them so and makes them try to log in again. If the user name doesn't show up in the database it says they must register and forwards them to a registration page. All is fine and dandy in my li'l ASP world. Except for one small problem... When testing my few pages I keep getting an "Unspecified Error" that always points to this line of code:
Far as I can tell, what's happening is that every time I access the database, I must wait a small amount of time (seems to be about 30 seconds) before I can do anything with it again, or I get this error.
Let me clarify, When testing, I would go to the login page, type a correct user/pass combination and then I get forwarded to the success page. Cool. I go back to the login page and try it with a correct username, but an invalid password.... oops, I get this error. If I wait about 30 seconds, I can go back to the login page and try again and everything is fine. The order I test in doesn't matter...
Correct Combo -> invalid password invalid pass -> non existant user correct combo -> correct combo etc...
Doesn't matter. Once I access the database via .Open it seems that I can't do it again for a while. Why is this? I use a .Close on my record set and then I set the recordset and connection objects to Nothing *BEFORE* each and every page redirect.
Hi guys . i wonder how i can trap the following errors in access 2000 forms. I have the database tables in sql server 2000 and front end is made by access 2000 forms. I be happy if some one show me how i can trap these errors and promt aproperte message to the user when they violate them using forms.Thanks
1)Violation of not null constraint 2)primary key violation 3)Trigger violation 4)and other erros
I'm having trouble opening up the tools I am developing in Access for multiple users. I split all my databases so the users will only interface with the "Front End" and I just tried saving one as an ACCDE file. I had the ACCDE file open on my machine and asked another person in the office to try opening it (all our files are stored on a network drive, which is already identified as a trusted source).
She got the following error message:
"The database cannot be opened because the VBA project contained in it cannot be read. The database can be opened only if the VBA project is first deleted. Deleting the VBA project removes all code from modules, forms, and reports. You should back up your database before attempting to open the database and delete the VBA project"
How do I fix this? I don't want to publish several Front End Access files since each person in my office will ask me to customize their file and my supervisor wants everyone working off the same file. I thought the point of Access was that multiple users could open the same file and make data modifications. How do I achieve this while retaining all the fun, creative VBA solutions I have developed?
I've developed a working query to grab some information from my Oracle 9i database using SQL Developer. I have a tool in MS Access 2003 that I'm developing for other users so they can input some options through the GUI and query the same data that I do.
I'm trying to translate the query I developed in Oracle and have it work in Access. I have my ODBC connection set up so that Access can get to the same tables.
Here is my Oracle Query:
[QUERY]...
The error I'm receiving is: Run-time error '3296'
Join expression not support.
I believe the error has something to do with the "LEFT JOIN CPCF ... " but I can't seem to figure out how to fix it. The query will run in Access if I change that to an "INNER JOIN CPCF ...." but the result set is not what I need it to be. Any thoughts on how to fix this?
Has anyone seem the problem when you close an access database and you think it is close but if you open the task manager you will see MSACCESS.EXE still running. Why ????
I want to put a button on my form which closes access i.e when i click it the access application closes and I go to desktop directly. Is there anyway I can do that.
I am writing a small database using MS Access 2007. I have in it a function for running queries and printing reports. Printing works just fine if any one of the multiple query criteria is give.
I also want to trap errors and present a message if the user clicks the "Print" button without a query criteria. At the moment I only get a run-time syntax error message which has a "debug" button for accessing the entire code. I want a message that will say "There was no search criteria".
This is the code for printing:
Code: Private Sub cmdPrint_Click() Dim varWhere As Variant varWhere = BuildFilter ' Update the record source Me.RecordSource = "SELECT * FROM q_Vehicles " & varWhere
I have been consistently getting an error almost every month when I try to load some data that has been input into access, then I have it linked to an excel sheet so that whenever I refresh, the access data imports into excel and updates my pivots, charts, etc.
When my data entry ppl enter data, sometime they forget to enter a code, or something, and when they forget to enter that, it creates some kind of error in the query. The query still runs in access, but shows something similar to " #ERROR#" in the field IF I ever do find it in the access query. The issue is that I cant filter to find that error. I literally have to scan and scroll through thousands of lines of data to try and find this error. When I try to refresh the data in excel, the following error message pops up;
"Data could not be retrieved from the database. Check the database server or contact your database administrator. Make Sure the external database is available, and then try the operation again."
In past months I can usually find the #ERROR# by scrolling through access and finding it. Some months I have EXTREME trouble finding the error. It can take hours out of my work day. Is there any way to more easily identify which line these errors are in rather than scrolling through thousands of lines of data? Is there a way to still export the data to excel with the errors still in them?
where do I add a closing string into this code and what do I write? The server said the database is not closing the access database correctly and i don't know what is wrong.
<!-- DYNAMIC DEBUG COMPILATION Set compilation debug="true" to enable ASPX debugging. Otherwise, setting this value to false will improve runtime performance of this application. Set compilation debug="true" to insert debugging symbols (.pdb information) into the compiled page. Because this creates a larger file that executes more slowly, you should set this value to true only when debugging and to false at all other times. For more information, refer to the documentation about debugging ASP.NET files. --> <compilation defaultLanguage="c#" debug="true" />
<!-- CUSTOM ERROR MESSAGES Set customErrors mode="On" or "RemoteOnly" to enable custom error messages, "Off" to disable. Add <error> tags for each of the errors you want to handle.
"On" Always display custom (friendly) messages. "Off" Always display detailed ASP.NET error information. "RemoteOnly" Display custom (friendly) messages only to users not running on the local Web server. This setting is recommended for security purposes, so that you do not display application detail information to remote clients. --> <customErrors defaultRedirect="error.htm" mode="RemoteOnly" />
<!-- AUTHENTICATION This section sets the authentication policies of the application. Possible modes are "Windows", "Forms", "Passport" and "None"
"None" No authentication is performed. "Windows" IIS performs authentication (Basic, Digest, or Integrated Windows) according to its settings for the application. Anonymous access must be disabled in IIS. "Forms" You provide a custom form (Web page) for users to enter their credentials, and then you authenticate them in your application. A user credential token is stored in a cookie. "Passport" Authentication is performed via a centralized authentication service provided by Microsoft that offers a single logon and core profile services for member sites. --> <authentication mode="Forms" />
<!-- AUTHORIZATION This section sets the authorization policies of the application. You can allow or deny access to application resources by user or role. Wildcards: "*" mean everyone, "?" means anonymous (unauthenticated) users. -->
<authorization> <allow users="*" /> <!-- Allow all users --> <!-- <allow users="[comma separated list of users]" roles="[comma separated list of roles]"/> <deny users="[comma separated list of users]" roles="[comma separated list of roles]"/> --> </authorization>
<!-- APPLICATION-LEVEL TRACE LOGGING Application-level tracing enables trace log output for every page within an application. Set trace enabled="true" to enable application trace logging. If pageOutput="true", the trace information will be displayed at the bottom of each page. Otherwise, you can view the application trace log by browsing the "trace.axd" page from your web application root. --> <trace enabled="true" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" />
<!-- SESSION STATE SETTINGS By default ASP.NET uses cookies to identify which requests belong to a particular session. If cookies are not available, a session can be tracked by adding a session identifier to the URL. To disable cookies, set sessionState cookieless="true". --> <sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;Trusted_Connection=yes" cookieless="false" timeout="20" />
<!-- GLOBALIZATION This section sets the globalization settings of the application. --> <globalization requestEncoding="utf-8" responseEncoding="utf-8" />
Recently Access has started to suddenly close. Usually when I have been developing although I do not appreas to have lost anything as I Save, Save, Save all the time. Last week I had a report that a live access 2000 is doing the same thing. Users are in the middle of entering data and suddenly the database is gone, with no messages. They can re-open the database and continue.
Anyone else experiencing this problem with Access 2000?
I have a fairly complex database with a lot of charts, reports, forms etc.
My problem is that whenever someone chooses to maximize a Pivotchart, a report preview or other things, they usually click the big X button in the top right hand corner and close Access entirely. They don't think to click the smaller x button right below it.
This is frustrating when they just want to go back to the switchboard to performs some other task. They have to restart the database, log in...etc.
I know you can prevent forms and whatnot from being maximized, but I do want them to have that feature for a number of reasons... especially with my Pivotcharts. They are much clearer when expanded to full-size.
Is there a solution to this problem, or do my users just have to be more careful?
Greeting, - i have a form, that has a List Box coming from a table ,, This list box when you click on it, it shows that field in the main form - and i have a front end and a backend to this database, - When i add a new entry in my main form, it shows in the List Box just fine, but when i click on that list box, it doesn't show the entry on anyone else on the network - works ok locally
here is an eg: my main table has firstName, LastName, PhoneNumber, Address
Form : main form has firstName, LastName, PhoneNumber, Address List Box inside my Form has: First Name
so i when i click on the firstName in my list box, it will show me the contact person in my main form
as i mentioned i have couple of people has the database open (split Database) anyone on the network, could see the update on the list box , but when they click on the new created name doesn't show in the main form, unless you close access, and reopen it again
i hope i was clear expaling,
any idea on how to have the List Box update itself without closing and opening Ms Access ??
server administrators have expressed concern about my website that it is having a negative impact on the server. He said this typically occurs when a website has a memory leak (where it obtains server resources and doesn't release them) or is opening database connections and not closing them until the point where no more are available.
I'm using asp.net to control Access and open the connections. I don't know why it isn't closing them? the website is:
pedalcar.com
Any thoughts of what the problem is and what the statement I need to close the connections?
I have a Access 2010 DB. The mainform have a subform with one table alone.
I have a button who close Access when the user are finish on the mainform. Still I have the upper right corner X-button who also closing the app.
My problem is that when the user use the X-button then a dialog box appear and ask for saving the changes for the table in the subform on the main form. The user must then do the choise 'yes' , 'no' , 'Cancel'.
There is no need for this dialog box, (I take care if it's necessary earlier) but I can't get rid of it.
I want to delete an excel file from within access vba. Problem is that if the file is open, it obviously cannot be deleted. so I need to check to see if that specific excel workbook is open and if it is, I want to close it before I can delete it.
All of the answers here involve creating an excel object and opening it before closing it. If I do that all that happens is a second instance of the workbook opens then closes leaving the originally open workbook still open.
Sub xx() Dim XLapp As New Excel.Application Dim ObjXL As Excel.Workbook Set ObjXL = XLapp.Workbooks.Open("C:dropboxexcelimport.xlsx ") ObjXL.Application.Visible = True
[Code] .....
The above code demonstrates my problem, if the import.xlsx file is already open then the code just opens another instance of this workbook and then closes it again leaving the original workbook open and as such cannot be deleted.
On a pop up form I have a list box. The row source for the list box is
Code: SELECT tblWebOrder.WebOrderId AS [Web Order No], tblWebOrder.CustomerWebOrderNumber, Format([WebOrderDate],"dd/mm/yyyy") AS [Order Date], tblCustomer.CustomerName AS [Customer Name], tblArea.Area FROM (tblCustomer LEFT JOIN tblArea ON tblCustomer.[PhysicalAreaId] = tblArea.[AreaId]) INNER JOIN tblWebOrder ON tblCustomer.CustomerID = tblWebOrder.CustomerId WHERE (((tblWebOrder.Processed) Like [Forms]![frmSelectWebOrderToOpen]![txtOrderStatus]) AND ((tblWebOrder.WebOrderDate) Between [Forms]![frmSelectWebOrderToOpen]![dteStartDate] And [Forms]![frmSelectWebOrderToOpen]![dteEndDate]+1)) ORDER BY tblWebOrder.WebOrderId DESC;
I have the following "On Click"event on the list box
Code: Private Sub lstWebOrder_Click() lngWebOrderId = Me.lstWebOrder.Column(0) DoCmd.Echo False DoCmd.Close DoCmd.Echo True End Sub
When I click on some of the records on the list box the form closes. On some of the records I get a parameter prompt to enter:
