I am getting this error on a access 97 database that we have been using for years. the message just started popping. use are still able to access the database, yet this message will not got away.
this member of the replica set has expired because it hasn't been syncronized with another m ember of the replica set.
The expression On Load you entered as the event property setting produced the following error: A problem occured while Microsoft Access was communicating with the OLE server or ActiveX Control.
Also same message but for on current.
Here's my code
Public Function WinName() Me.username = GetWindowsUserName End Function
Public Function Edit() If Me!username = [tblpersonnel.username1] Then AllowEdits = True ElseIf Me.username = "martiscm" Then AllowEdits = True ElseIf Me.username = "larsong" Then AllowEdits = True Else: AllowEdits = False End If End Function
Also once I'm in the form, if I navigate to the next record I get the same message but it's for On click.
i seem to be geting this message ( attached ) everytime i load the form for the first time. once i click ok, i can the enter data into the field and save as normal. if i load the form and got to a different field, it seems to be ok and the mesaage does not come back but it is definately there when i first click in the same field.
i have checked the form properties, field properties and code but i cannot see anything.
what usually causes this?
the text is the right size the form is not in design view
i cant seem to find if the field is read only but after the box, i can enter data so that should remove any read only issues.
I have a multi-user MS Access97 database application. It is causing one of the users (and I have only once had the error message myself) the following error message:
"There isn't enough free memory to update the display. Close unneeded programs and try again."
This error message occurs when the user is doing data entry via the forms and navigating between forms in the database. The form, on which the error occurs becomes oversized and does not display all the information. The user is forced to shut down the database, re-open it, and then it works fine....but eventually the error re-occurs.
I found Microsoft's article 236977, but it applies to working with Forms in Access 2000. This problem is happening in Access 97, and none of the causes listed in the article apply.
Has anyone every come across this....and do you know of a solution?
Once in a while, the Access 2000 application on our server has this error below:
The database “network pathdatabasename.mdb” needs to be repaired or isn’t a database file. You or another user may have unexpected quit Microsoft Access while a Microsoft Access database was open. Do you want Microsoft Access to attempt to repair the database.
I tried to click the "OK" button to repair it, the first several times, it keeps saying that my computer name was using it so it could not been repair. I even re-boot my computer several times, still can not repair. The next day, I tried to repair it again, it ran about only two-fifth at the status bar, and the "Program Error...MS Access has generated errors and will be closed by Windows. You will need to restart your program. An error log is being created" keep popping up, so I could never repair the file.
Does anybody know WHY it happened and HOW to prevent it from needing to be repaired?
I'm working in Access 2000 for the first time and all was well until I introduced a wizard-created Switchboard. I created the Order Entry database using the Access wizard and copied the Switchboard form and tables into my database.
Since then I keep getting the following message:
"Error accessing file. Network connection may have been lost."
I've Compacted and Repaired but still keep getting the message. Does anyone have any ideas what's going on?
please help I am working with access database I have limited experience with access. I am unable to figure this particular problem. Microsoft access can't append all the records in the append Query microsoft access set 0 field to null set to convertion failure and didn't add 2 to records to the table due key violation 0 record due to key lock violation
please help I am working with access database I have limited experience with access. I am unable to figure this particular problem. Microsoft access can't append all the records in the append Query microsoft access set 0 field to null set to convertion failure and didn't add 2 to records to the table due key violation 0 record due to key lock violation
I am trying to export from Access to Excel. I am relatively new to this process. I am receiving an error that I am not using a valid path. I have tried to recreate the former path without any luck.
What I had done was to delete some old information that was making the former Excel sheet too large and create a more up to date database. I had to reformat the spreadsheet and export the new information to excel but when I pull it in it will not pull into the shared network drive without giving me the error message.
I have created a Asset database using MS Access 2010 & the same was published in SharePoint portal. Post publishing, all the "Query & Forms" are working as excepted but the "Reports" are not working.
The "Reports" is designed with "Group & Sort" option. Post grouping am able to see the "=Sum([Expression])" (i.e. Sum of the Value) value in MS Access Locally but not in SharePoint. Once i published in SharePoint, am getting "#Error" message for all the below expression wherever i have used in my reports design.
Expression Used: Below expressions are works fine locally & getting #Error in SharePoint. 1. =Sum() 2. ="Page " & [Page] & " of " & [Pages] 3. =Now() 4. =Date()
Not being a code person. This code worked great for 2003, but we just installed 2007. I get an error message when the this code runs:
Its a complie error User-defined type not found
Sub ShowUserRosterMultipleUsers() Dim cn As New ADODB.Connection.....red shows where I get the error message Dim rs As New ADODB.Recordset Dim i, j As Long
Set cn = CurrentProject.Connection
' The user roster is exposed as a provider-specific schema rowset ' in the Jet 4.0 OLE DB provider. You have to use a GUID to ' reference the schema, as provider-specific schemas are not ' listed in ADO's type library for schema rowsets
Set rs = cn.OpenSchema(adSchemaProviderSpecific, _ , "{947bb102-5d43-11d1-bdbf-00c04fb92675}")
'Output the list of all users in the current database.
Has anyone had this problem: You make an access mdb database "X" with table "A"- which includes autonumber field and few more fields (text or something else). Than You make another mdb file "Y"- which contains link to table "A" in mdb file "X". When You open mdb file "Y" and You open linked table - You can not see data from the table - instead it showes "Autonumber" (text) in every field (autonumber field and other text fields). Then You close the linked table and open it again and everythnig is ok. And every time it shows this error on first opening. On another computer (with the same windows instalation) everything is ok. I tryed to reinstall windows (on the machine with the error) - clean install - and the problem is fixed. Another time I install the same windows again - and the error is back. Then I reinstall the windows again (clean install) - and this time error is still present. I tryed to install another access (2003 instead XP) - but it doesn't help. What is going on ?
Does anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following: 1) Shows all records 2) Requery 3) ApplyFilter. The Where Condition for the filter is: Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
I have attached a screen print of an error message I recieved on my access database. I finally got it to come up, but only after a few pop up boxes with this error message.
I do know the shared drive it is housed on went on the fritz. So I copied it and pasted it to my desk top. Grrr...I thought this message was due to the flipping shared drive. But now, I recieved it on my desk top too.
Anywho...can someone look at it and tell me what it means.
Thanks alot.
PS, i know my desktop has to much stuff, so don't go there. ;)
Hi can anyone help i keep clicking on a qry and it comes up with this message "Syntax error (missing operator) in query expression 'tblSTSLimits.Max Short'. but Max Short is correct can anyone help
I have a table that keeps crashing. The only error message I get is "Invalid Argument". Each time, a single record will turn into "#Error". Each field says this in the row. When this happens, Access won't let me delete just that row,
I am trying to Right Join two queries which are basically from the same exact table, but when I do that I get the following error.
ODBC--called failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] The column prefix 'MS1' does not match with a table name or alias name used in the query. (#107).
The following is a copy of my SQL
SELECT PqryExpiredPolicy.Policy_Number, PqryExpiredPolicy.Orig_Exp_Date, PqryExpiredPolicy.Insured_Key, PqryNewPolicy.Policy_Number, PqryExpiredPolicy.Name FROM PqryNewPolicy RIGHT JOIN PqryExpiredPolicy ON PqryNewPolicy.Insured_Key = PqryExpiredPolicy.Insured_Key;
I have looked for this MS1 and cannot find it. Any ideas where I should be looking or what this means?