Access Database Suddenly "Read-Only"

Oct 26, 2007

Hello,
I have an Access database that for some reason just converted to "read-only". I used to be able to open the database and do whatever, now it says it is read only. I have checked the permissions for both the database itself and the folder it is in and they both do not have "read-only" selected. What I really don't understand is if I use my application that uses the database (written in ColdFusion) I get the error - must use an updateable query. BUT if I continue to hit refresh, then it'll work! So it's like it works sometimes, but not all the time - as if it's switching back and forth between read-only and not read-only. Does anyone have any suggestions?
Thank you!!

View Replies


ADVERTISEMENT

Database Suddenly Read-only

Jun 19, 2007

I have a database running for the last 6 or so years (A97) and have the ctl-shift disable enable code in it to stop people tinkering about with it.

The database was aparently working fine yesterday and today it's decided to be read-only so no-one can update the data.

It's on a server - all permissions ok and not read-only.

I can't get the disable/enable code to work either. So basically, it's locked for any development changes and it's locked for any data changes.

The IT boys are going to take a backup from the tapes of the server and re-install it, so it should be ok, but I've never had this happen before and the database is used daily for the last 6 years with no problems.

Any speculative thoughts?

[edit] I have done a search and couldn't find anything that fitted the situation

Thanks

Col

View 9 Replies View Related

Access 2010 Table Suddenly Read Only - How To Remove That Restriction

Nov 8, 2014

This application has worked fine in the past, but now I find it stops cold saying a particular linked table is read-only. I've looked around and all I can find in the various forums is how to MAKE a table read-only. Reversing that process seems very difficult.

The application is a copy of another that now exhibits the same problem. Each uses a different data mdb - part of the development I'm doing involves changing a different table. I'm developing changes to the application in this separate copy.

I can't tell if other tables would have this problem - the table in question is the very first used (initialization routine) and I can't get past it without deactivating a bunch of code.

View 8 Replies View Related

Database Suddenly Becomes "Read Only"

Aug 23, 2006

I have a database on a network which has no security setup; everyone who has rights to its directory has full rights to the application. From time to time, it becomes "Read Only" and no one can do anything that requires writing to the local tables (the back end database is "Read Only" for everyone.) Checking the database properties shows the database as not being "Read Only" and changing it to read only and back again does nothing.

So far, the only way I have been able to solve this problem is to replace the "Read Only" database with a backup copy that is not "Read Only".

What could be happening here?

View 1 Replies View Related

NOT Read Only Access Database

Nov 16, 2004

How do you make an Access database able to have records written to it (NOT read only)?

View 2 Replies View Related

Access Database Read-only

May 4, 2005

I am having problems with ODBC Access data source name. When I want to display some database data in a html table on a webpage there is no problem. But when I send data from a html form to the database I get an OLE DB error. (I am using ADO). I can't remember the message exactly but it was something like

Microsoft OLE DB Provider for ODBC drivers error '80004005'
[Microsoft][ODBC Microsoft Access driver] The command must be execute on a query which can be edited.
insert.asp, line 50

For some reason my database is read-only. And I don't want that. I tried
1. ODBC administrator deleting and creating a fresh System DSN, checked if there Read-Only wasn't marked on.
2. Deleted my browser cache.
3. Restarted computer several times again
4. Installed MDAC 2.8 again.

btw. I have created the table with MS Access XP and i am using Windows XP.
Below is my code.

[code]
<FORM ACTION="insert.asp" METHOD="post">
Barcode: <INPUT TYPE="text" NAME="a1" SIZE="15"><BR>
Artist: <INPUT TYPE="text" NAME="a2" SIZE="40"><BR>
Album: <INPUT TYPE="text" NAME="a3" SIZE="50"><BR>
<INPUT TYPE="submit" VALUE="Send">
<INPUT TYPE="reset" VALUE="Clear"><BR>
</FORM>
<%
a1 = request.Form("a1")
a2 = request.Form("a2")
a3 = request.Form("a3")
if ((a1 <> "") and (a2 <> "")) or ((a1 <> "") and (a3 <> "")) then
Set db=Server.CreateObject("ADODB.Connection")
db.ConnectionTimeout=40
db.Open "DSN=pieter", "admin"
sql = "INSERT INTO albums VALUES ('"&a1& "','"&a2& "','" &a3& "')"
Set rs = Server.CreateObject("ADODB.Recordset")
<----- Here is the error ----> db.execute sql
db.close
Set db=Nothing
end if
%>
[code]

View 2 Replies View Related

I Can Read, But Not Write To My ACCESS-database??

May 31, 2005

I have an access database and some asp-code on my computer which only works one way?
I can read from it, but not write?

...and when I put the asp-code and the database on anohter server it works fine.
..what setting do I have to do, to make it work on my computer?

I have another asp-site with a mySQL-database on my compter which works fine...but
it doesn't work with my access-database...hmm...I can only read from it.

View 5 Replies View Related

Modules & VBA :: Read XML File Which Needs To Be Processed In Access Database

Oct 8, 2013

For weeks I am trying to read an XML file which needs to be processed in an Access database. I can not find the proper way to:

- find a specific node
- iterate from there

The XML file is an international bank file:

Code:
<?xml version="1.0" encoding="utf-8"?>
<Document xmlns="urn:iso:std:iso:20022:tech:xsd:pain.008.001.02" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<GrpHdr>
<MsgId>001-2013-09-19-18:12:17</MsgId>

[Code] ....

I started quite simple, just wanted to read to node MsgId. This is the code I use:

Private Sub ReadXML_Click()
Dim aDoc As DOMDocument60
Dim aNode As IXMLDOMNode
Set aDoc = New MSXML2.DOMDocument60
aDoc.async = False
aDoc.Load DLookup("C:Sample.XML")

[Code] ....

Whatever I try: //MsgId or MsgId the results is "No nodes". How to read to XML.

Besides reading one node, the next challenge will be iterating the PmtInf node. There can be 1 in the XML file but also 50.

View 12 Replies View Related

General :: Opening Access Database In Code As Read Only

Jul 30, 2013

I am trying to open up an Access database as read-only from another running Access database. The code I have to open the database currently reads:

"""C:Program FilesMicrosoft OfficeOFFICE11MSACCESS.EXE"" ""f:commonpattyTraining Database.mdb", 1)

How do I change to read only?

View 3 Replies View Related

General :: Database In Read Only Mode On Server In Access 2010

Jul 18, 2012

I'm working in Access 2010. I created a database that I want to post in a server on the read-only mode, so that users can not change forms or querys. How can I do this in Access 2010?

View 11 Replies View Related

Moving Database To New Computer (Win XP Pro / Access 2003) - Data Has Become Read Only

Feb 20, 2013

Moving to new computer, both under Win XP pro, Access 2003. New computer is MacBook Air running Parallels. Transferred Access database via an external hard drive. Now the data shows up as Read Only. Is there a procedure to run down the cause and make the data accessible?

View 3 Replies View Related

AutoNumber Primary Key In Database Starts Jumping Suddenly By Thousand Places

Jul 14, 2014

The above image is of a table which I need to update according to a new data on daily basis. As you can see when I added two records at the last , the AutoNumber primary key of the table jumped by thousands . I have used the following query to update the table

Code:
db.Execute "INSERT INTO D_Counterparty (CPTY_ENTITY_ID,CPTY_DESC)"_ & "SELECT Ctpy_Entity_Id,Ctpy_Entity_Legal_Nm"_ & "FROM NewCU LEFT JOIN D_Counterparty ON D_Counterparty.CPTY_ENTITY_ID=NewCU.Ctpy_Entity_Id"

I never changed the AutoNumber from incremental to random and I have also tried re-seeding it but had no success. Also when I inserted the sample values using a sample table ,the AutoNumber was working fine . Here's that query

Code:
db.Execute "INSERT INTO D_Counterparty (CPTY_ENTITY_ID,CPTY_DESC,) SELECT a,b, FROM sample"

I did not use join in this query ...

View 2 Replies View Related

Access Suddenly Closes

Oct 10, 2006

What would cause Access to suddenly close without warning while busy with a query?

No error messages, nothing! The query is a fairly big one that normally takes about 6 minutes to run, but has had no problem with it for a number of years. A new drive used for back-up purposes was recently fitted to my PC which now has 3 internal hard drives.

Could this problem be caused by a bad memory handling configuration? The original setup that worked before may have been changed when the new drive was installed. The XP Page File size for example may have been changed.

Any advice would be much appreciated.

View 2 Replies View Related

Access Suddenly Slow Down

Nov 16, 2007

Hello,

My acccess (.mde) application suddenly slowed down. I have increased the size for some fields in some Tables. Is it could be the reason for this? Is there any way i can get the speed back.

Many thanks in advance..

Nitesha

View 4 Replies View Related

Access 2000 Suddenly Closing

Jul 16, 2007

Recently Access has started to suddenly close. Usually when I have been developing although I do not appreas to have lost anything as I Save, Save, Save all the time. Last week I had a report that a live access 2000 is doing the same thing. Users are in the middle of entering data and suddenly the database is gone, with no messages. They can re-open the database and continue.

Anyone else experiencing this problem with Access 2000?

View 4 Replies View Related

Suddenly Encountered An Error In Access

Nov 20, 2007

Hi,

It was working firn till yesterday morning. I have not made any changes in this. But now i am encountring the following error

Run time error 3125
The database engine can't find ". Make sure it is a valid parameter or alias name, that it doesn't include invalid characters or punctuation, and that the name isn't too long.

Please help me. Same thing working properly in other application . Same code same database.

Many thanks in advance fro your help.

Regards
Nitesha

View 6 Replies View Related

Read Only Database

Jul 12, 2006

Hi, I am trying to create a database from scratch, however I need multiple users to have access to it. I do this nearly everyday and have no issues on the LAN we use.

This week I have been struggling to create a database on a different LAN. I create the database however I get the message that it is read only when I close it and enter it again. This means that other people are also unable to open it at the same time, and when they managae, they only get read only access.

Could this be a strange unfamilar-to-me LAN set up? Or is there something fundamental that I am not doing when creating this database?

Thanks for any help

View 1 Replies View Related

Read-only Database?

Jul 17, 2007

hello,

You helped me solve my linking issue with my front-end/back-end database, but I've got another question. Whenever I open up the front-end ( the shortcut to it anyway), I can't open it in edit mode- only edit. Even if I do a fileopen and select the type of open I want, it doesn't work. How do I open it in edit mode so I can link the table?

thanks again

View 4 Replies View Related

Backup Database Is 'read Only'

Feb 13, 2006

Hi All,

I created a database in Access and of course password protected the backend version. As a matter of course I backed up the mdb to cd in case of emergency.

Our network has been taken down due to some virus being bought in by a laptop user so I wanted to reinstall the mdb from the cd to my c: drive.

The problem is that the file is saying that it is 'Read Only' which I think is down to the password protection i put on there.

Question:
Is there a way I can get round the security?

I promise I am not a hacker!

Cheers

Smudger

View 2 Replies View Related

Tweaks For Database? Ah...just Read What I Mean!

Jun 29, 2006

I would like to tweak my database so that when it opens for the users it will not show the minimize, maxamize, and close buttons at the top. Also, I would need code that will maximize my forms automatically. Let me know if this is not a good idea? I am trying to eliminate someone thinking that the close button will act as a cancel button. I dont want them to save information on accident since access saves automatically! (I already have a close without saving button on every form but people are used to closing document to not save them)

View 6 Replies View Related

General :: Database Is Read Only

Jun 8, 2015

The database I am working with suddenly says that is ready only, and I cannot make changes! How can I make it not read only?

View 2 Replies View Related

Database Opens As READ ONLY

Oct 14, 2014

I have a FE DB that I have been opening and closing at various times without incident. Now all of a sudden it only opens as READ ONLY. I can't find anyone with a BE open that might be causing this. What will cause this? If I save a copy and then replace the original will I lose my data?

View 6 Replies View Related

Quick-save Database To Read-only

May 12, 2005

Does anybody know if there is a quick way of making a database read-only (so no data input OR design priviledges).

Ive had a request to send somebody a database so they can look at the data but not add/amend etc. The only thing I can think of is adding a security workgroup and assigning read only permissions. But this seems a bit long-winded and I wondered if I was missing something obvious like a 'save as - read only' option.

Any ideas.

Thanks,
Adam.

View 3 Replies View Related

How Can I Read A Text File Into A Database

Jan 4, 2005

This is what I would like to achieve

Each time a person comes into our building, they use a electronic key. The information is recorded into a text file. I would like to extract information as described next



The date from the line marked D. Date is marked in bold

The time from the line marked T. Time is marked in bold

The key number and Location from the line marked M. Key Number & Location is Marked in Bold



Sample of the text file:



D[ Fri 30/04/04 ]

T[ 08:19 ]

M[ Valid key:130 Ing group, tenancy:SUNCITY, door:Lower Roller Dr, panel:SURF CITY. ]

N[ 0 2 0 0 5 23 1 0 0 0 130 2 ]



D[ Fri 30/04/04 ]

T[ 08:22 ]

M[ Valid key:20 LEAD NGUYANST, tenancy:SUNCITY, shaft:0, panel:SURF CITY. ]

N[ 0 1 0 0 5 16 1 0 0 0 20 2 ]



D[ Fri 30/04/04 ]

T[ 08:23 ]

M[ Valid key:556 Ing Group, tenancy:SUNCITY, door:Lower Roller Dr, panel:SURF CITY. ]

N[ 0 2 0 0 5 23 1 0 0 0 556 2 ]



…..and so on the text goes



I am reasonably familiar with access but I have not had any experience with Text Files . Could someone post a sample db that would give me a starting point. any information would be appreciated.



Phil.t

View 6 Replies View Related

Error "The Database 'Name' Is Read-only?

May 15, 2007

Hello,

I have a MS Access 2000 database application stored on a Novell Network server and being shared more than 20 users. However, occasionally, different users, who want to open it in the morning have the error message The database 'Name' is read-only. Therefore, those users can NOT run any action or procedure queries/reports. To resolve, we have to disconnect all the current users, who previously open the database, then everybody can open WITHOUT the "read-only" error!!??

Please advise any permanent solution to avoid the "read-only" issue without disconnect all the users who already open the database?

Thank you so much.

View 1 Replies View Related

General :: Database Becoming Read Only At Random?

Jun 24, 2014

I'm sure it's not random, but it doesn't seem to follow any sort of rules. My database has become "Read Only" 3 times now causing all workers using the database to stop work until IT can fix the issue. All IT does is kick everyone out of the folder that my db is in and suddenly it is no longer read only.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved