Access Query Using Criteria In Linked Excel Table
May 4, 2006
I use an Excel interface to retrieve data from an Access file that has approximately 1 million records. I use an MS Query from Excel to run an Access Query to retrieve the data.
I have 16 "Criteria" fields (columns) in Excel that I change with drop-downs. Each criteria column has 2 to 9 values set; a total of 75 values. I pass these criteria fields to Access via a table link in Access.
The criteria of the fields in the query that is run in Access to pull the data based on the table link is updated by using the Values In A List (IN) option.
When I refresh this query in Excel, it pulls the data fine, but may take 10 minutes to run. (I am using MS Office 2003, 1Gig memory). I have limited VBA knowledge. Is there a better/faster way to pull this data?
View Replies
ADVERTISEMENT
Aug 23, 2005
I'm trying to link a spreadsheet as a table in Access 2002. The link wizard is importing my number columns as numbers, even though I defined them as text. I need for them to be text in Access. How do I force this?
Thanks
View 6 Replies
View Related
May 22, 2013
I am trying to create an access table linked to an excel file.
The excel file has 256,000 kb, 15 columns, 6,400 rows.
When I go to CREATE, DESIGN VIEW in access and try to create the new linked access table i get this message -
"MICROSOFT ACCESS HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE". I click on Ok and then it says "REPAIR MY OPEN DATABASE AND RESTART MS ACCESS".
I click on OK and then save the back up file. The file disappears. I start over again and the same process starts again and again...
View 14 Replies
View Related
May 16, 2012
I'm trying to use a template to track assets-specifically this template:URL....Is there a way I can link an excel doc to my database that provides all of my data, that is thereby linked to other tables within Access?I want my data to be updated as it is manipulated within the independent excel doc when I open access.
View 6 Replies
View Related
Feb 28, 2014
One of the tables in my access file is a linked excel file. I however now want to create a form with which I want people can enter information in the table. However when I try to do this, it doesn't work. Whether it's possible to create an input form for an excel linked access table?
View 1 Replies
View Related
May 3, 2013
What is the strategy for doing this rather than the code (if it's possible)? I can code a fair bit of VBA in excel but I'm not too sure about what I'm doing in Access.
View 1 Replies
View Related
Aug 29, 2005
I'm using MS access and Excel 2000. I have an Excel spreadsheet that contained 8 columns, the first column has all cell format as Number, the rest of the column is set as custom date format of 'dd/mm/yyyy'. When I create a linked table in MS Access, the data types does not matched my excel spreadsheet columns, the 'Number' data type is a double and I want a Long Integer in Access, and the custom date format become text datatype but I wanted a DateTime datatype. Is there any work around this? Seems like it is a common problem.
Your prompt response is greatly appreciated!
Thanks in advance!
Martina
View 1 Replies
View Related
Apr 29, 2008
Hello all
I am using Access as a front end (GUI) with a SQL 2005 database and have several linked tables. An user encountered an odd error that I cannot figure out.
He created a query that had criteria on a date. When he tries to run it the query will not do anything. If he closes out of the query and does any other operation he gets the "This Action will reset the current code in break mode." error and will have to close out access before he can do anything else.
I'm found some strange work-arounds but want to fix the problem the correct way. Attached are two examples - the first one causes the error the second one is the work-around that returns the desired results.
Any ideas?
View 1 Replies
View Related
Apr 13, 2015
I'm working with a form in Access 2013 that uses the navigation buttons. I'm trying to have my criteria for a query link to a dropdown box on the form. I had no problems doing this in Access 2010 with normal forms, but I can't link the criteria, in the query to the Navigation buttons form box. I'm tried using
[Forms]![TheNavigationTab]![NavigationSubform].[Form]![Field]
And various forms of the above... but i still can't see to tell the query to find the critiera at this location...
View 1 Replies
View Related
Aug 29, 2006
Hi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
View 1 Replies
View Related
Feb 26, 2006
I am using Excel and Access 2002. I have linked an excel file in Access. It is my understanding that if I add a new record in Excel it will automatically add it to Access and vise-versa. This is not working for me. I can add to one or the other and it will not display in both excel and access. I can manually add to both and access will display all data from both the database the table in access and the linked excel file. Any Ideas?
Thanks!
Terry
View 1 Replies
View Related
Mar 29, 2007
Does anyone know why when i have a link excel spreadsheet in my access database i am not able to edit the data?
I have a copy of the database on my laptop and it works fine, i can edit and add data but the office copy which is on the network it will not let me edit the linked spreadsheet in access. I have an update query that updates a field in the linked excel table but it no longer works. I dont think there is any special permissions on the files. It is sooo frustrating... dont know what to do.
Thanks for letting me vent.
View 3 Replies
View Related
Oct 21, 2012
how i can export the data from Access to excel using Access VBA for the specified sheet using data linkage with access database. Like we used to do it manually in excel as external data from access.Like we have some codes for linking excel file to database mentioned below;
DoCmd.TransferSpreadsheet acLink, , "region", "F:DB PracticeBook1.xlsx", False, "region"
Can we have something like this to link database table in excel file automatically.So that the excel size won't be that big and also it saves processing time.
View 5 Replies
View Related
Sep 28, 2007
I have a Table in my Db that is a link to an Excel spreadsheet.
Of around 200 records just one is giving me a problem, in one field.
The Excel SS itself is the result of links to about 8 other SSs
The problematic field is a part number and is formatted as text, in the linked table and the underlying SSs. But this one bl**dy field which should be '1707' is shown as "#Num!" Which suggests to me Access thinks it is an number.
Other linked cells like "12345" are fine ???
I have tried putting a letter infront and it then works correctly. Remove the letter, back to "#Num!" again!
Can anyone suggest a way of forcing the formatting to text please?
Cheers
View 2 Replies
View Related
Jun 15, 2012
I have a report which runs from a linked excel worksheet. Is there any way I can limit the number of rows in the access reports to only show those rows which are populated in the excel worksheet.
Presently, if the excel worksheet has information in say 20 rows, when I come to print the access report it is telling me there are 1067 records and the only way I can print is by selecting pages 1 & 2 of the report to print.
View 1 Replies
View Related
Aug 8, 2013
I am writing code to Refresh table links. I only want to refresh the Access table links and ignore the Excel Table links. Is there a way to determine in VBA if the table link is pointing to an Excel file?
View 8 Replies
View Related
Nov 25, 2004
Just wondering, is it possible to have an excel file, which is a export data from an Access db query, and whenever I open this excel file, it'll automaticallly run the query and get the most updated data? If so, What do I need to do in order to link the excel file to the query?
Thank you. Any help is appreciated.
View 3 Replies
View Related
Jun 28, 2006
Dear Sir/Madam,
I am having the problem of importing a database from Excel/Msaccess 2000 to a Msaccess 2000 database from which the data was originally exported. The Database consists of two tables connected in a querry and the two tables has a unique primary key thru which the two tables are linked using a querry. While importing only two tables are listed in the importing wizard and not the querry.
So how to import the data to the two tables connected by a querry using a primary unique key.
help me the procedure.
lrnathan
thanks in advance
View 1 Replies
View Related
Jun 21, 2012
How to export a MS Access table or Query to and Excel file and it works great. How to make this code Export multiple table into one Excel file/
here is the Function:
HTML Code:
Sub ExportData_Sheet_Basic()
On Error GoTo ExportData_Error
'DAO objects to get the data
Dim db As DAO.Database
Dim rs As DAO.Recordset
[code]....
View 5 Replies
View Related
Dec 17, 2013
I have a table that has one field and I want to use this field as a query criteria . when i click on CRITERIA & BUILD, Access lets me select the table field and shows [tblBillRun]![Bill_Run] for the criteria but when I click RUN, it prompts me to ENTER PARAMETER VALUE. What am i doing wrong?
View 3 Replies
View Related
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
Below is what I have tried but in vain and it says atmost you can atmost one criteria row in sub query
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
View 9 Replies
View Related
Oct 24, 2012
I have a simple calculated field (As "Ratio") that is readable in Access 2010 query, but crashes in Excel upon importing/running the query in an .xlsx table.
ERROR MESSAGE in EXCEL: "The query did not run, or the database table could not be opened...check database server..contact your database administrator.."
I am simply taking the cost amounts of each project record (shown as "Record Cost") and dividing it by the "Total Cost" of that project to render "Ratio".
The Total Cost is retrieved from another table.
Testing scenarios:
If we exclude Ratio, the whole query import just fine.
If we filter the query to one project (i.e. "Project A") the ratio field imports fine.
However, the whole unfiltered query does not with the ratio!
Other testing scenarios:
If we use a constant for the denominator AS "1" in Ratio (i.e. recordcost/1) the whole unfiltered query and ratio field imports fine.
If we use a constant for the numerator AS "1" in Ratio (i.e. 1/totalcost) the whole unfiltered query upon import crashes in Excel.
This is a mock example of the dataset, the actual query has 50K+ records:
Project Service Date Record Cost Total Cost Ratio
A Welding 1/1/2012 $100 $120 83%
A Plumbing 2/1/2012 $20 $120 17%
B Welding 1/1/2012 $50 $75 67%
B Plumbing 2/1/2012 $25 $75 33%
C Welding 1/1/2012 $40 $61 66%
C Plumbing 2/1/2012 $21 $61 34%
View 5 Replies
View Related
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
View 3 Replies
View Related
Mar 23, 2006
I have an excel file linked to a table in Access. Several fields are date data types in excel but are showing up as text fields in Access.
My real goal is to do a comparison between two tables, but only if the date of the one piece of data is newer than the other. I had planned on comparing the two date fields but even though I have formatted the date fields in my excel file to be "Date", when I look at the design view of my table it is showing up as "Text" and therefore I am unable to do this comparison.
I'm not sure if it's just something that I'm missing but maybe someone else knows an easy fix to this. I know this is probably a simple question, but I did search the forum and didn't find a thread that specifically dealt with this issue.
Thanks in advance for your help.
View 2 Replies
View Related
Dec 12, 2013
I decided to link Excel files and all is running fine except when I run a query on the file I get about 1,041 blank rows before my data is displayed in the query's datasheet view or any report based upon this query... the data seems good but why the leading blank rows? The data in the linked Excel sheet does not look like this and another Excel file's query looks fine and they seem set up identically!
View 2 Replies
View Related
Mar 26, 2008
I have managed to build a macro that will run a query I have in Access but what I would like to do is be able to change some of the query criteria using the macro script or any other way possible.
Is this possible?
Thanks
View 1 Replies
View Related