Hi Gents,
I copied my mdb from one pc to another. Both pc has Access 2003 ver.
But when I try to open one of the form it gives error. The error has been attached in a Jpeg file. But when the same form runs from previous pc, it runs smoothly.
Kindly let me know why this occures and what is the solution to get rid of this.
Any help would be appreciated.
With kind regards,
Ashfaque
.
I had a search client form. This form used to work fine, so i haven't tocuhed it for a while. Basically what happens is you double click on the client and it clones it to the form.
However just a second ago i tested the form again and an error appears "ActiveX component cant create object". I've made no modifications to anything involving this form so im bit stuck for ideas.
I also received an error message telling me to check - Visual Basic --> Tool --> Reference. That says "Missing: Microsoft DAO 3.6 Object Library". I have browsed for the file but had no luck in finding a file to replace it.
I use Access 2010 on Windows 7 64b to create a form with a Treeview control. However, this control is missing from the list of controls activix. How can I add?
View 4 Replies View RelatedHi All, Thanks in advance for any suggestions :)
Okay Im trying to create a form with a text box that has a Date/Time format applied to it. I also want it to default to TBD (to be determined) but it wont allow me to have text as default because of the date format. So I have a label floating overtop of it with TBD as the caption. So i want to write code that will show the Label in the form until you click on it, then it will show the text box underneath, hiding the label, and the user can input a date. I also am trying to figure how to have TBD be visible again if the user deletes the date in the text. this is what i have so far and some of it is working...thanks to anyone who can help
With CurrentForm
!txtEditModeChange.Requery
If .Name = "SYS_HOPCoverPage" Then
If !PlannedInService.Value = Null Then
!PlannedLabel.Visible = True
!PlannedInService.TabStop = False
Else
!PlannedInService.Value = Not Null
!PlannedLabel.Visible = False
!PlannedInService.TabStop = True
End If
End If
End With
Ok I know that I am missing something stupid but i've been staring at it for so long I can not figure out what it is.
I have a query to show run leaders in decending order and when I run the query from the query design view it works perfectly however when I open the form that is based on that query it is not sorting the runs in decending order but sorting the players by alpha name. Every other report in my program works fine except this one...BLAAAAAAH what the heck is the problem?
I have 3 tables. Two of them are linked in a one to many relationship to a reference table. I am trying to create a form that populates data in the two forms that are connected to the reference table. Is this possible?
View 1 Replies View RelatedI am going to retype this as perhaps my original explanation was too wordy.
I need to display data from 2 tables in a continuous form. Sure I can do this with a query and a join, but the user needs to be able to add records to the form as well. When adding a new record, only one field need be entered (actually selected from a combo box) and the other 2 fields would auto-fill based on the selection.
Is this even possible?
I created lots of controls on my form, and now i cannot create anymore. I do not know what the problem is... I just get an error message that says:
"MS Office Access cannot create any more controls in your form/report. If you have deleted controls from this form/report in the past, try renaming the form/report and then add more controls to it"
I tried renaming the form already. it didnt work :confused:
I tried to create a new database (i copied all the tables, queries and forms into the new database). it didnt work.
I dont know what else to do... Please help
I would dearly appreciate any help. Thank you in advance :)
I have a query called VOLTEST that is not bound to the form. VOLTEST sums a field in a table from a subform. When the input is finished in the subform and control goes back to the main form, I want the total from the VOLTEST to show in a field on the form that is not a tab stop. Basically, this is just for reference.
I have tried to put =[VOLTEST]![SumOftest_value] in the control source of the field on the form but I keep getting "Name?" as the result instead of the sum total.
I can run the query in the gotfocus of the first field in the tab order after the subform and I get the correct result in a datasheet view. So, I know the query is working correctly. I just need it to show the result in field on the form.
Thanks for your help. GG
I have a form to edit records. When I open the form I am not able to change any of the fields until I edit a date field that has a calendar popup on the "on click" event. After that all of the fields are available for editing. Any ideas??
Thanks,
Pat
I'm having a problem with a form/subform. The table I'm using includes the fields: date, personnelID, status, comments. The main form has a single field, date. The subform has the fields date, personnelID, status, comments. I have the form/subform linked using the Date field, because there are multiple instances of the same date in the table, I have to keep clicking the navigation buttons on the main form to go through all the duplicate dates to get to the next one. Is there a way I can filter the Date field on the Main form to only show one copy of each date? I had thought about creating a new table with only a date field and no duplicates, then just append all dates from the main table to this one and use it to go through the dates, however I'd rather not have to make an extra table just for this. This is basically for personnel accountability, I want to be able to select a date on the main form and display the "daily status"(present, on leave) for each person in the subform.
Even better would be if I could create a next and previous button to switch the date on the main form(I know how to do this.) but how would I get the subform to update the records to the date on the main form and keep it from going to dates that don't exist?
I have a form, where the users choose a name from a pull down box and enter the date and other information. The pull down box has more than 100 names. The information such as the name, date, etc. gets stored into a table. It is fine if a certain name appears more than once on the table. I want to create some code, where if I click a button, it counts how many times each name appears in the table and outputs this information. I want the output to have the name in one column and the number of times it appears in the second column. Any ideas on how I could do this. I am very new at access and VB. I would appreciate your help. Thank you. (Basically I want to see how many times each name has filled out the form)
For example,
smith 3
doe 4
bell 8
Dear access experts,
I created form based on a query of around 7 tables, all the fields are set to
enabled and edits are allowed; however, access wont allow me to edit any of
the fields in that form! I know that the query is correct because i can flick
through the records and the fileds change.. please help:eek:
I'm trying to use code from a project that came with an Access book. However, I can't get it to execute, because I can't get it to compile.
Could someone PLEASE help me out?
Private Sub Search_Click()
gstrWherePhys = ""
If Not IsNothing(Me!LastName) Then
gstrWherePhys = "[LastName] Like " & Chr$(34) & Me!LastName
If Right$(Me!LastName, 1) = "*" Then
gstrWherePhys = gstrWherePhys & Chr$(34)
Else
gstrWherePhys = gstrWherePhys & "*" & Chr$(34)
End If
End If
If Not IsNothing(Me!FirstName) Then
If IsNothing(gstrWherePhys) Then
gstrWherePhys = "[FirstName] Like " & Chr$(34) & Me!FirstName
Else
gstrWherePhys = gstrWherePhys & " AND [FirstName] Like " & Chr$(34) & Me!FirstName
End If
If Right$(Me!FirstName, 1) = "*" Then
gstrWherePhys = gstrWherePhys & Chr$(34)
Else
gstrWherePhys = gstrWherePhys & "*" & Chr$(34)
End If
End If
If Not IsNothing(Me!City) Then
If IsNothing(gstrWherePhys) Then
gstrWherePhys = "[City] Like " & Chr$(34) & Me!City
Else
gstrWherePhys = gstrWherePhys & " AND [City] Like " & Chr$(34) & Me!City
End If
If Right$(Me!City, 1) = "*" Then
gstrWherePhys = gstrWherePhys & Chr$(34)
Else
gstrWherePhys = gstrWherePhys & "*" & Chr$(34)
End If
End If
If Not IsNothing(Me!Facility) Then
If IsNothing(gstrWhereCust) Then
gstrWherePhys = "[Facility] Like " & Chr$(34) & Me!State
Else
gstrWherePhys = gstrWherePhys & " AND [Facility] Like " & Chr$(34) & Me!State
End If
If Right$(Me!Facility, 1) = "*" Then
gstrWherePhys = gstrWherePhys & Chr$(34)
Else
gstrWherePhys = gstrWherePhys & "*" & Chr$(34)
End If
End If
If Not IsNothing(Me!State) Then
If IsNothing(gstrWherePhys) Then
gstrWherePhys = "[State] Like " & Chr$(34) & Me!State
Else
gstrWherePhys = gstrWherePhys & " AND [State] Like " & Chr$(34) & Me!State
End If
If Right$(Me!State, 1) = "*" Then
gstrWherePhys = gstrWherePhys & Chr$(34)
Else
gstrWherePhys = gstrWherePhys & "*" & Chr$(34)
End If
End If
If IsNothing(gstrWhereCust) Then
MsgBox "No criteria specified."
Exit Sub
End If
Me.Visible = False
DoCmd.Hourglass True
If IsLoaded("PhysicianDB")
Forms!PhysicianDB.SetFocus
DoCmd.ApplyFilter , gstrWherePhys
If Forms!PhysicianDB.RecordsetClone.RecordCount = 0 Then
DoCmd.Hourglass False
MsgBox "No Customers meet your criteria"
Me.Visible = True
Exit Sub
End If
Else
DoCmd.Hourglass True
DoCmd.OpenForm FormName:="PhysicianDB", WhereCondition:=gstrWherePhys, _
WindowMode:=acHidden
If Forms!PhysicianDB.RecordsetClone.RecordCount = 0 Then
DoCmd.Hourglass False
MsgBox "No Customers meet your criteria"
DoCmd.Close acForm, "PhysicianDB"
Me.Visible = True
Exit Sub
End If
DoCmd.Hourglass False
End If
DoCmd.Close acForm, Me.Name
End Sub
I have a continuous form reflecting events. The notes field is too large and so has to be it's own form. I made a button that is supposed to open the notes for the record. But it doesn't matter which record I'm on, it clicking the button always brings up the same note - it doesn't link the criteria and open only the correct record in the notes form. Is this because it's a continuos form? How can I fix this?
View 8 Replies View RelatedSorry this is so long but I am trying to make it as detailed as possible...
The Setup
My database is similar to the sample "Service Call" db. I have a main table called "tblTT" which has an autonumber primary key. The table also contains several foreign keys such as UserID (not an autonumber) from "tblUser", TechID (also not an autonumber) from "tblTech", etc. I have the relationships setup with "Enforced Referential Integrity" for both updating and deleting records. Each relationship has a RIGHT OUTER JOIN ("Join 3" in access) so that all records from child (tblTT) and only equal from parent (tblUser, tblTech, etc.) will be included. I have a form for nearly every table which serves different purposes but the main function of the DB is to create new Trouble Tickets (TT's), a.k.a. service calls. Therefore the main form used is my "frmTT" form in add mode. The form contains all the fields from my "tblTT" table and contains (directly) no fields from any other table (I guess indirectly it contains fields from all the parent tables...).
The Problem
When I pull up "frmTT" and try to create a new Trouble Ticket for a user that does not yet exist in the table "tblUser" I get the error "You cannot add or change a record bcause a related record is required in table 'tblUser'".
What I want is for my users (the "Techs") to be able to create a new Trouble Ticket without having to worry about populating the "tblUser" table (and other parent tables) first.
My Solution
I was going to (and unless someone can find an answer for me still will) fix this using VB script by setting up a query to check all the parent tables for the values in their corresponding fields in the form. If the query returns no results an "INSERT INTO" statement will run to populate the parents tables so that the form will save itself into the Trouble Ticket table ("tblTT").
I feel that this is a huge work around and not the proper fix. I would prefer to do this the right way both to have a correctly setup DB and for future reference. Can anyone help me with this?
Thanks,
Andy
I have a subform with loads of command buttoms on it but if I try and select any of them I get the message "The OnClick you entered as the property setting produced the following error: A problem occured while BCF data collection tool was communicating with the OLE server or ActiveX control". I don't understand what this means and just wondered if anyone could point me in the right direction for resolving the issue.
View 2 Replies View RelatedI just added a ActiveX control to my program and I have a scroll mouse, and there when the user used the mouse to scroll through the records, the record changes but the ActiveX Control doesn't. My activeX Control is used for a digital signature. Anyone Have any ideas?
View 2 Replies View RelatedI use the Calendar ActiveX to select a date.
The calendar have a dropdownlistto post the selectede date?
I the calendar to dissapear after the date is selected. The selected date should remain in the drop down list.
I think that the control have a dropdownlist to show the selection, but i didn't found it.
Thanks,
Richard
Hi All!
I'm new to ms access 2007.
How can I register my ocx files? like comdlg32.ocx?
Please help! My .mde file is running but somehow some of the features are not running.
I need to use various activeX controls in MsAccess2003. I downloaded a few activeX controls but I am having a problem with licensing. I registered the controls and the registration succeeded but when I try to add this ActiveX control on a form in MSAccess, I get the message that I don't have the license required to use this ActiveX control and that I should obtain the appropriate licence from the company that provides the licenced OLE object or ActiveX control. Any ideas on how to overcome this problem?
View 3 Replies View RelatedHello, I wrote an access program using version 2000 and the activex calendar 11.0 which came with the software. When i tried to run the same program on access 2003 none of my dates worked and I got error messages all over the place. Help!
View 4 Replies View RelatedI use the Active X calendar control 10.0 in a number of forms*. The mscal.ocx file is in c:Program FilesMicrosoft OfficeOffice 10.
(*In the calendar's Properties it says it is "MSCAL.Calendar.7", which I think is just MS's way of confusing people.)
After splitting the deploying my app, it appears lots of my users either don't have version 10.0 or it is stored someplace else; for example, in C:WindowsSystem32. Because they don't have the correct version/path, everything crashes.
So, how can I easily determine whether users have the right ActiveX in the correct location?
The Microsoft web site says "To distribute your component as part of a Visual Basic application, you can use Package and Deployment Wizard". I don't have that wizard in my version of Access (2002 SP3 on Windows XP), so that's not an option.
Microsoft also says to "To enter the base address for your component, open the Project Properties dialog box and select the Compile tab. The address is entered in the DLL Base Address box, as an unsigned decimal or hexadecimal integer. The default value is &H11000000 (285,212,672). If you neglect to change this value, your component will conflict with every other in-process component compiled using the default. Staying well away from this address is recommended." It seems to make sense that I put the mscal.ocx in the database's directory on the server to serve as the "base address", but other than that this option scares the heck out of me.
Does someone have any suggestions how to easily ensure users have the right ActiveX version on their computer - and in the correct location? (I'm not a super-coder.)
As always, thanks
Christine
For selecting a Date /time value, I use activex control DTPicker5... What Activex object, or infact any object, can I use to select a color value ?
your answers will be appreciated
Jabez
I have a database in access xp pro with a form that i have a calendar in, the problem is when i open the form i get a error mess (can't set value to NULL when checkbox proberty = false.
HELP Rocky
PS it may help to know that i am not a programer.
I'm using an activeX control and access gave me an error message showing that "I must register the ActixeX control. how can i do this?
View 6 Replies View Related