I created a report based off of several tables and queries. Now I need to go in and add another field from different table. The item is not on the field list and trying to edit the expression doesn't seem to be working. Any suggestions?
View RepliesI know that multivalue fields are not the best to use, but I have a simple database that they work fine in. My question is this: Is there a way to show the entire list of choices in the multivalue field on a report? Not just the ones selected, but all of them, whether checked or not? The multivalue field has a list of names and the user selects each name if they repond to a incident (fire, car accident, etc.). My report would show the entire list and count number of responses by each name during a date range. I want to show all of them on the report, with those not selected showing "0".
View 3 Replies View RelatedI'm an Access novice. I have a query based report that is based on several tables. All tables are joined by the same field "customer ID," but 1 table is not available under "Add Existing Fields." I cannot figure out why that table isn't available, but I need to add a field.
View 8 Replies View RelatedI am in the process of creating a training database that includes levels of proficiency with certain tasks for employees.
In one of my reports I would like to appropriately display with tasks the employee "Cannot Perform";"Can Perform with Assistance";"Can Perform Alone";"Trainer" (straight from the field list of the task). But I can't seem to get the hierarchy correct. Tried it in a PivotTable too as I thought similar to PTs in Excel you could get some kind of "count" of values. Couldn't make that happen either.
Each employee has a proficiency rating on about 20 different tasks. Proficiency input is controlled by a field list. I would like to structure this part of the report like so:
------------------------------------------------------------
EMPLOYEE PROFICIENCIES
--Cannot Perform Task
----Cutting
----Trimming
----Grinding
--Can Perform With Assistance
----Painting
----Fixing
----Drilling
etc. etc. So in this case the Field itself would become the value being grouped. I know there has to be some logic either in a query or SQL.
I’m developing a claim tracking database that tracks dates of events that occur in the course of processing a claim; such as, Loss Date, Report Date, Estimate Date, Payment Date, etc. There are 16 different “Events” in all.I currently have the following tables set up:
tblClaim
ClaimID
ClaimNumber
fkEmpID
tblEmployee
EmpID
EmpName
[code]....
What I need to do is create a form where management can choose two or more events, and calculate the average number of days between two of any of the events, for an employee, or all employees.I have created a crosstab query to change the values in the EventName field in tblEvents to field names, and the EventDate as values for the related EventNames. I created another query based on this query to do the DateDiff.
I created combo boxes on my form with the Row Source Type set to Field List, for a list of fields in my crosstab query. I’ve tried to use the following DateDiff function to get the days between the two fields selected in my combo boxes:
Code:
DateDiff("d",[Forms]![frmReportBuilder]![cboEvent1],[Forms]![frmReportBuilder]![cboEvent2])
But I get an error about unrecognized field name or expression for my combo boxes. So I added my combo boxes in the query parameter window, with a data type as both text and value, but with both I get an error “This expression is typed incorrectly or is too complex to be evaluated.” I also specified the column headings in the crosstab but I still am getting the “too complex” error.I’m pretty sure it’s trying to do a Datediff on the literal values in the comboboxes and not recognizing that I’m trying to specify field names.Is it possible to assign field names in DateDiff this way?
Hi
I am using Access 2002 SP1 and have created a pivot table based on a query which works fine. However if I change the structure of the underlying query by adding another field, the field is not availabe in the Field List in the pivot table. I have used the refresh option but I understand it only applies to the data.
Any ideas?
I had two fields in my table which I previously used in the form. I deleted the fields from the form itself but the fields are still listed under Field List and not even under any table...
Delete buttons doesn't work on it, and neither does backspace?
How do I remove it? Right click only gives me two options:
"Add Field to View" or "Edit Record Source" which returns an error saying this command cannot be used.
I made a report that have 'txtRemarks' field, I just want to get remarks automatically in 'txtRemarks' field based on the other field in report. that is why I used a function like below:
Code:
Private Function Estd_Remarks(Estd_Point As Long) As String
If Me.Estd_Point < 20 Or Me.Estd_Point = 0 Then
Estd_Point = "Earlier Established"
Esle
Estd_Point = "OK"
End If
Estd_Remarks = Estd_Point
End Function
And I wrote in properties 'On Format' event this code below:
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Estd_Remarks = "Ok" Then
Me.txtRemarks = "Ranked & Sortlisted"
Else
Me.txtRemarks = "Estd_Remarks"
End If
End Sub
When preview the report then it shows
Compile error
Argument optional
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform
'Application.TempVars.Add "varcountryselect", "*"
SELECT in the listbox "lstlocationsperproject"
SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox
Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0)
Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
I have a report that is looking up min and max quality specifications for a product. The table with the specifications has a Yes/No check box field for when the specs are defined as "Internal". So the table looks like Product/MinValue/MaxValue/Internal
I want the report to display "TEST AND RECORD" when the Internal box is checked where the MinValue and MaxValue (that are stored in the table) would be displayed otherwise.
I am working on a report and have found a problem. I have a field called "region". The data is geographical and is basically stuff like "southeast", "mid-atlantic", "southwest", etc. I reference this field in the report but the report shows the ID field of the table where this data exists, rather than the data in the "region" field. So, instead of "southeast", it shows "3".
View 12 Replies View RelatedOkay,
The subject is probably confusing but I'll try to explain.
Setup:
Table1
FieldID = Number
FieldName = Text
Table2
FieldID = Number
FieldName = Text
T1_ID = Number
Relationship
Table1.FieldID 1-> * Table2.T1_ID (one to many)
Now, I'm trying to create a 3rd table that has field populated by Table1 and a field populated by Table2 but I want to limit the field populated by table2 by what is selected in the field populated by table1.
Table1:
1st
2nd
3rd
4th
Table2:
1st,January
1st,February
1st,March
2nd,April
2nd,May
2nd,June
3rd,July
3rd,August
3rd,September
4th,October
4th,November
4th,December
Table3:
Table1Field = Number, ComboBox-Source: Table1, BoundColumn=1
Table2Field = Number, ComboBox-Source: Table2, BoundColumn=1
If Table1Field = 1st then
Table2Field Will only allow January, February, or March as selections, since ONLY they are a member of the "1sr" group via the table1 list.
Is this possible, or do i have to do some run-time checking or something?
Thanks
Jaeden "Sifo Dyas" al'Raec Ruiner
Okay, I'm not sure if this is possible, i'm just spitballin' here, so bear with me.
I have a table that has the names of all the months (January - December) and it is linked to a second table that has three fields, 2 of which are populated by field names of a third table.
Table1:
MonthID
MonthName
Table2:
Month
MonthCount (Text, populated by FieldList Table3)
MonthCost (Text, populated by FieldList Table3)
Table3:
Jan_Count
Jan_Cost
Feb_Count
Feb_Cost
etc...
Now I would like to do a query that does some aggregate functions on the specific fields in Table3 based upon the values in Table2. Something Like This:
Query:
Source: Table3, Table2, Table1
Table2.Month, Sum(Table3.[Table2.MonthCount]), Sum(Table3.[Table2.MonthCost])
So I would get a list:
Januaray 200 $1000
February 320 $2300
Etc.
Can I do that?
Thanks
Jaeden "Sifo Dyas" al'raec Ruiner
I do not have the option to refresh my field list in Access 2003. I am tring to add a new field in my table and then update it in my form. I do not see the toolbar on the top of the field list window, like help said. Please help this has been bugging me all day. This is what help shows me.
Refresh the field list of a data access page
If you're working in a multiuser environment, or if you modified an underlying table or query after opening the page, you might want to refresh the field list of the page.
If the field list is not open, click Field List on the toolbar.
Click Refresh on the field list toolbar.
Thanks
Hi
on my form i have unbound list box with 10 items.
Below are several fields bound to a query.
I would like to be able to double click an item from the list box and sent it direct to a specific field.
I don't want that specific field to have a combo box of the listed items above, is this possible and how do i implement it.
thks.
Does anyone know why I cannot select the "Field List" to display the fields from a Table on a Form with the Tab Control Added.
I can select the "Field List" from a simple form with nothing added to it. But as soon as I add the Tab Control I cannot use the "Field List"
Thanks......
How do I add fields from a different table when constructing the form?
Thanks in advance.
John
In my list box I have two coloums, Surname and Christian Name, now can I get both names to go into a text field. I can get one of the names i.e surname or christian name by changing the bound coloum from 1 to 2. But I need both names to go across?
View 2 Replies View RelatedAll,
I wish to create a custom form to link into my tblData table, however when I open a form in design view, the field list is not displayed. I have tried to select it from the toolbar but the button is not available ('greyed out'). I know I have done this before but can't remeber how.
Any help please would be great?
JB
When you use a Yes/No field in your table and then want to have another field that will allow the user to list if yes...
_______________
Example that will be used in my form:
Are there any dependencies? Yes/No (they will choose from a drop down, yes or no)
If yes, please list dependencies: ??
_______________
How do you set up the if yes field in the table? I want it to be able to have it show as a list, not as one long text field with everything seperated by commas or semi-colons.
Is this possible?
Hello,
I have a form that I need to modify. Currently, the field list shows Query 1 as the 'control source' for the text boxes on the form and I need to change to use Query 2 but I am unsure of how to do this. Do I have to delete the test boxes and start fresh or can I change the field list and use Query 2 as the source?
Thanks for any help.
JTP
I would like to have a listbox that contains all of the fields names from a table. Since the user will be selecting items from this list box, the field names should be referred to by their captions as defined in the table.
The listbox values will change depending on the value selected from another listbox.
Question: using code, how can I fill a list box with field names and display the field caption?
Thanks!
Lisa
When I "Add Existing Fields" I'd like the list to be sorted alphabetically...how to do this?
View 4 Replies View RelatedI'm trying to limit the funders under previous applications to ones with the same name so then when you click on one it loads that other funding application details...
Code:
SELECT [Sheet1].[ID], [Sheet1].[Funder] FROM Sheet1 WHERE [Sheet1.Funder] Like [Sheet1].[Funder] ORDER BY funder;
Code:
[Sheet1.Funder] Like '" & [Sheet1].[Funder] & "*' ORDER BY funder;
[code]...
I want to edit a report i Access. How do I activate the Field list so I can choose fields to insert into my report? It is gray.
View 3 Replies View RelatedI'm trying to set up a database of books in a small library - each book has a prefix (Maths, English, Art etc) which I want users to be able to pick from a drop down list - I can do this, but the next field is a sub-category - is there a way of populating the dropdown list for the sub-category field depending on the chosen entry in the prefix field. eg if maths was chosen I would like the user to have the choice of number area, volume etc. but a different choice if the prefix was English.
any help very gratfully received - it seems to be a simple problem but it has me stumped.