Per the instructions detailed here...
http://www.fontstuff.com/access/acctut08.htm
...I created a parameter query in the form of a drop down box that uses a
command button to produce a query.
The code is as follows:
Private Sub cmdCreateReport_Click()
DoCmd.OpenQuery "qryUIRFollowUp", acViewNormal, acEdit
DoCmd.Close acForm, "frmOpenUIRLookUp"
End Sub
This produces the data I need in datasheet view. I want to use this same
data to populate a form I've created that will use the above data as a
springboard to add more data to another table (also connected to my form).
So what code do I need to add to the above so that along with producing the
data the command jumps right to the next step and feeds this data
into the form and then displays that form?
I am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close() If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then Application.Quit Else ??? End If End Sub
This is code in a command button on a form to preview a report. DoCmd.OpenReport stDocName, acViewPreview, "Control Room Query", "[Lot #] = Forms![Hydro COA]![LotNumber]" What could I change in this code to use in a different command button to have the report sent as an attachment in snapshot format in an email? The user would have to fill in the address, subject and body of the email. Thanks much!
I have two text boxes and a check box - so the user can enter (1) patient weight, (2) patient height and then check whether the patient is male or female. The first two are then used to calculate a Body Mass Index. (simple enough and works OK). What I then want to do is have four command buttons that become visible when the calculation is within a certain range. So - simplistically- if the calculation (calctxtbox) is between 0 and 5 AND the patient is female then the command button called "normal"(Command79) is enabled. My VB code writing is improving (thanks largely to this forum!) but still very basic - can some-one help please?
Do I put my code in the "after update" event of the calctxtbox?
Private Sub calctxtbox_AfterUpdate() If calctxtbox > 0 (How do I say and <5) and then how do I say Female =Yes Then Command79.Enabled = True End Sub Am I close? Also can you enable labels and text boxes or just buttons.
Hi! I have a cmd Button in a form that onclick is suppose to open the selected record in a specified form. My problem is when the specified form opens it doesn't have any data in it. Any thoughts would be much appreciated!! Here is the cmd button code i used:
Private Sub Command14_Click() On Error GoTo Err_Command14_Click
Dim stDocName As String Dim stLinkCriteria As String
I have created command buttons to enter event registration information after biographical information has been completed. When I click on the button I get the following error message:
"Microsoft Office Access cannot find the field '|' referred to in your expression."
This is the On Click code that I have in there. Can anyone spot the error of my ways?
Private Sub RegisterButton_Click() On Error GoTo Err_RegisterButton_Click If IsNull(Me![AttendeeID]) Then MsgBox "Enter attendee information before registering for an event." Else DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70 DoCmd.OpenForm "Registration", , , "[Registration]![RegistrationID]=Forms![Attendees]![Attendees Subform].form![RegistrationID]" End If
Exit_RegisterButton_Click: Exit Sub
Err_RegisterButton_Click: MsgBox Err.Description Resume Exit_RegisterButton_Click End Sub
Access 2007, Sql Server 2008 R2. Problem with refresh.
Form 1, (Single Form) Parent Form, contains Property Year Detail data. PK = PropYrDetID. This is a SINGLE FORM
Form 2, (Single Form) Child form, contains land square footage data from multiple records. PK = SPYDID FK = PropYrDetID. This is a SINGLE FORM.
The code below executes every time Form 1 opens, activates or whatever. The reason is that data in Form 2 changes frequently. Thus every time Form 1 opens the end user will see the latest data.
"Form 1" receives a series of values that it obtains from VBA code that runs when it opens or activates.
"Form 2" has the data being summarized in Form 1.
All of the code and queries below run fine and return the correct values from Form 2 to Form 1. My problem is Refresh on Form 1.
I've tried the code in the On Current, On Activate, On Load of Form 1. Mostly the data shows up in Form 1. Other times parts of the data are left out. I have to hit F5 or close and reopen the form, and then the data appears. When I don't see data on Form 1, I check the underlying table and the correct data exists. I don't know how to achieve a 100% refresh success. I have tried me.refresh and different Events all over the place.
All of the code below runs when Form 1 opens. Queries are fine, Equations are fine, Tests run fine. It's the results showing up that I am having the problem with.
I don't think the issue is with the code but with the Refresh. Here it is for your review.
The term "Equations" is the customers. There are 5 equations. Some have a series of tests after the Equation to determine the result.
Code:
Private Sub Form_Activate() Dim rs As Variant Dim varAOProp As Variant Dim varAOIni As Variant Dim varAOCert As Variant Dim varBORIni As Variant Dim varBORFinal As Variant
I have two forms one simple and another sub form located in simple form and connected to query where query has parameters, while opening the simple form the sub form require the parameter values. Question is here how I can make the sub form like when I open the simple form the sub form must be disabled (not request me for parameter values) and make a button in simple form to activate the sub form and then request me the parameter values.
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code. The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime" Do While Forms!frmdatetime!OKFlag.Caption = "False" DoEvents Loop
When this code is run by clicking on a command button, it works fine. If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime. If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
I created a form that lets the user choose specific criteria, through a combo box, to run a report that houses several subreports. Each combo box is referencing 4 queries needed to run the report.
=[Acctmgr_renewed_detail]![RenewalMonth] And [Acctmgr_begbal_2005]![RenewalMonth] And [Acctmgr_cancelled_sum]![RenewalMonth] And [Acctmgr_renewed_sum]![RenewalMonth]
The form also includes a command button to preview the report. However, when I click the command button, the prompts for parameter values for the report popup again, when it should just print the report. Below is the code attached to my command button:
Private Sub Command2_Click() Me.Visible = False DoCmd.OpenReport "Acctmgr_monthly_activity", acViewPreview DoCmd.Close acForm, "valarie" End Sub
Is there something I need to add to my code? If so, what? Any help would be much appreciated.
Hi everyone, I am trying to create a button on a form that will export only that record. On the command options I do not see there being an option to do such. Can anyone help? Thanks
In one of my forms (which is a datasheet) I want to create a hyperlink or a command button (in each row), which enables the user to jump to another form (determined by the cell contents).
I have achieved that by replacing my datasheet with a continuous form and adding a command button. But I would much rather keep my datasheet format.
I tried to put a command button into the datasheet, but it won't display it.
Is it possible to achieve my objective here ? I am not having much joy with HELP.
I am trying to put a button on a form I have created so that I can use Filter by Form feature on it. I used the toolbox commnad button wizard and chose the Form Operations -> Apply Form Filter option for the button.
Unfortunately, this button does not work for this choice. In the Form view, if I click on this button nothing happens. Other choices in the wizard such as Edit Form Filter etc works.
Does anyone know what could be the problem? Is this an Access bug (i am using Access 2003).
If it is a bug, can anyone suggest what little modifications one might have to do to the VBA code underlying OnClick event for the button to make this command button work?
In a form of my "cities-of-the-world" database I have amongst others the fields: "Latitude" & "Longitude" Now I'm looking for the command button code that runs a querry to find all neighbouring places i.e. [Latitude] would be 'Between (Latitude + 0.75) and (Latitude - 0.75)' ... longitude likewise. In other words: When the form displays the record for Berlin, on clicking the command button there should appear a list containing the cities: Bernau, Oranienburg, Potsdam ...
Hi, I'm an Access newbie. I've designed a fairly simple database to replace an old spreadsheet that was becoming unwieldy -- it was never really used so much for calculation as for data storage, so Access seems more appropriate anyway.
One of the functions I used in Excel was the autofilter, which I found very useful for zeroing in on specific portions of the data. I was wondering how I would do the same thing in Access, and then I discovered the "Filter by Form", which works just fine -- even better actually, since it has the whole and/or functionality.
I was wondering though if it would be possible to invoke "Filter by Form" using a command button. That would make it even easier, especially for some of my users who would almost certainly not know about "Filter by Form" otherwise.
There is a continuous form with a check box in each row and a command button(cmdDetails) in the form footer section. You select a record and press cmdDetails and another form opens.
Rather than in the footer, I would like to have the command button placed in the details section itself, in each row, against each record, so that the check box can be eliminated. Pressing any button will open the corresponding form. how I can "associate" each record with the button next to it.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
I currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate] Example: IDPO Date btnOpnFrm 6543 2/1/05 btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
I need to regularly use officelinks from within Access, but would like to make a command button on a form to automate the process for me, I have no idea where to start.
I have a template saved and a query built but am unsure of the code to automate this process.
I've had a search around but have been unable to find any examples of how to do this.
I have based a form on a parameter query, so that when the user is prompted to enter a 'Hobby' to search on, the relevant records will be displayed on the form.
Now, I have created a command button designed to open a template letter in MS Word for a particular hobby. The problem is, I need the command to open certain file depending upon the value input in the parameter box intially. How would I go about doing this?
