Hello everyone!
Before i forget: Sorry about my three identical posts before :-(
Here is the thing:
I've attached a picture of one of my forms (on a very early stage). I want to save the inputs into a table1 containing all the coworkers. I want to write the value 'X' into the column selected in the drop-down menu. But only at the coworkers whose numbers are entered into the textboxes 1-6.
How is that done???
// JR
Hi everyone, I am new to this so bear with me.
I currently have a form with textboxes and 2 combo boxes. I have a submit button at the bottom of the page and would like this to take all the infomation from the form and add to a master table.
I was hoping to be able to create a pop up message to say "This item has been added to the database"
Can anyone help point me in the right direction?
Many Thanks!
Hi everyone, I am new to this so bear with me.
I currently have a form with textboxes and 2 combo boxes. I have a submit button at the bottom of the page and would like this to take all the infomation from the form and add to a master table.
I was hoping to be able to create a pop up message to say "This item has been added to the database"
Can anyone help point me in the right direction?
Many Thanks!
I have a form (called User_Input)with 2 text boxes, 5 combo boxes and a Submit button, which is bound to a table (called Submssion table) i.e the form submits its entries into the table called Submission.
I want the submit button on the form to work based on this condition:
1. Check current submission of four fields (corresponding to entries from 4 out of the 5 combo boxes on the form) in the table and confirm if the current selection on the form already occurs in the table up to two times. If this is the case, the Message Box should pop up on the form informing user to make another selection as maximum number of entries for that particular selection is already in the Submission table.
2. The checks for the four fields will be done simultaneously as the selection will be done together on the same form.
3. However, if the entries on the Submission table is not up to 2, the entries should be saved to the table and Messagebox should display "Thank you for your Submission"
I need to use Macros for this being a web database which will be published using Sharepoint and VB is incompatible with the web database.
How do I submit a zipped mdb for help solving a problem? Is there a file size limitation?
John
I have a label that I use to display certain information that will not refresh for new, but existing, records. I have prepaired/reduced an zipped Access 2003 mdb file. Would it be possible to submit this file for review in order to locate the refresh problem? The size of the file is 598KB; what is the size limitations?
thanks,
John
Hey all, I'm in a pickle and hopefully you guys could help me out. My users are old and scared. They require things made in a familiar fashion which slows people in the know, but it's what makes them work well.My most recent request from them requires me to make a "Submit" button for one of the forms that way they "know" the data is in the table. However, I know of no way to hold data cached until a button is pressed.Is there a way to do such a thing? Cache data until a button is pressed? To the best of my very limited knowledge, data entry takes effect immediately.
View 4 Replies View RelatedHi,
I have a form, that has some text fields and a couple calendars for the user to select the dates from.
What I would like to happen is, after the user enteres the data, and they hit submit. I want the form to go back to a new entry, but it's not quite doing this.
The data they type in dissapears after submit, but the calendars seem to hold whatever date they used. And when they try and enter another entry, they can't select the same date as before. They have to hit a different date first, before it allows them to re-enter the same day.
Anyone know why? Is there a way to make the form refresh, or reload after they hit submit? So it will allow them to enter something for the same day?
thanks
chris.
I have a form which is used in the Data Entry mode. I have a button on it called SUBMIT which closes the form. Of course in actual fact, as soon as data is entered on the form, it goes into the relevant tables, even if the form is closed without using the SUBMIT button.
I want the SUBMIT button to actually work like a submit button, so that no data entered in the form is actually entered into the underlying queries or tables UNLESS the SUBMIT button is clicked. Is it possible to do this?
Alternatively, if there could be a MACRO or something so that if the form is closed in any other way, the data just entered is deleted.
Any help appreciated.
Thanks!
I have a simple data entry form...when the user enters in something and tabs to the next field, it automatically adds the data into that field. Is it possible to dissalow or turn this automatic update off? I ultimately want the user to complete the whole form, then click submit. At that point in time and only then will the data be updated into the table....(the submit button simply goes to a new record to add)
Or, same thing, when they tab down to the last field, and then tab to the first again (rolls over to new record)
thanks!
I know many are opposed to multi-valued fields, but in this case it works out nicely for my purposes.. I pick a couple things from a table to put into a field in a separate table via multi-value lookup, and when I hit ok, nothing happens. Literally. Tried the enter button, tried a mess of different keyboard mashing, and nothing. URL....
Row Source:
SELECT [Cage Codes].[CageCode], [Cage Codes].[Company], [Cage Codes].[Division] FROM [Cage Codes] ORDER BY [CageCode];
I am working on a form and I only want the information to be inserted into the database if the user clicks the button at the bottom. In other words, if the user is filling out the form and then closes the form, I do not want that record saved.
View 2 Replies View RelatedI'm trying to build an expression where the form can only be saved if the field supervisor approval is not null.
View 1 Replies View RelatedI have been creating an inventory control system for my small business. I am looking for a code that will generate to another form. So for example if I take out 4 aprons from the first row by hitting the '-1' button 4 times leaving 46 in total how do I generate the information from one form to another by hitting that submit button.
My other form shows Product ID, Date Taken, Product Description, Employee who has taken it, Amount Taken, and Total left in inventory. I need the correct information to show accordingly in the Inventory control form.
I am attaching screen shots ....
I have this database with the purpose to storage all the tasks that are done in my team. I have a table named Tasks with all their fields. Now, I would like to set a more user friendly way for clients to update this table. I have created another table with a list of most common tasks, so when a client wants to add their tasks list they can choose one of this tasks and add it to the list. I had created a form with multiple items that contains the common tasks and next to each task a button that adds the information they choose into the table "Tasks". This works just fine. However, I would like to add a single button at the top to add all the tasks instead of having to choose one after one.
The "Add All tasks" button has this code:
Private Sub Command79_Click()
Dim valSelect As Variant, MyDB As DAO.Database, MyRS As DAO.Recordset
Set MyDB = CurrentDb()
Set MyRS = MyDB.OpenRecordset("Tasks", dbOpenDynaset)
[Code] ....
There are two tabs named Table1 and Table2. In actual there are two tables in Access database named Table1 and Table2. How the data is stored in ACcess tables, I have made two tabs in excel workbook. Now I want Access VBA code that will check if data in Reference field of Table1 matches with any of the data in Reference field of Table2.
If it matches then change the status of the corresponding record of Table2 with either "Withdrawn","Obsolete" or "Updated". SO it depends upon which field out of "WIthdrawn","Obsolete" and "Updated" in Table1 stores "Y". At a time only one of them will have "Y" and rest of two fields will have "N" as shown in the sheets.
As in the example, now Reference "R566" of Table1 matches with Table2 Reference so the status field in Table2 for that record will be "WithDrawn".
I would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
IIf(IsNull([Forms]![Form2]![MaxDiffInput]);[Maximum operational pressure (bar)];[Maximum operational pressure (bar)]>=[Forms]![Form2]![MaxDiffInput])
However, is not providing any result when the input field (MaxDiffInput) as a value.
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected
Total Envelopes=sum(Envelopes) for date selected
Total Documents=sum(Cases) for date selected
Total Pages=sum(Pages) for date selected
what I want to do is make a button to search range of columns in data table with data type Yes/no and display the results if the value is yes
View 9 Replies View RelatedI have a database that I import data from an excel spreadsheet into multiple times daily. The table that this data is imported into has several key fields that if the data already exisits in the table, and I attempt to import data that is the same except for one or more of the key fields is different. At this time the database it creates a different record. I am trying to get the database to overwrite the data in the database.
View 1 Replies View RelatedMy question is this: I have a table where I'm entering employees' hours worked. Basically, it's something like this:
ID WorkerNumberDateworkedTimeStartTimeEnded
121/2/201310:00:00 AM3:00:00 PM
221/3/20132:00:00 AM11:00:00 AM
321/4/201312:15:00 AM11:30:00 AM
421/5/201310:25:00 PM11:00:00 AM
531/2/201311:00:00 AM3:30:00 PM
631/3/201312:00:00 PM10:00:00 PM
731/10/20137:00:00 AM4:00:00 PM
I have a query that (easily) determines how many hours an employee has worked on any given day. What I can't figure out at all, is how to write a query that can figure out how much time an employee had off in between shifts.
Thus far I'm able to run a query that separates this main table into individual workers by their id numbers, but can't figure out how to determine time off between shifts - as the last hour worked one day, and the first hour worked the next day are on two different lines (they are two different table entries).
I am trying to use SQL to run queries in our access database in order to (hopefully) speed things up. I'm trying to create code that basically takes data from one table and inserts it into another whilst doing calculations on the data.
However I can't get past this:
Code:
Private Sub Test_Click()
Dim strSQL As String
strSQL = "CREATE TABLE [TempRedAmberGreen]" & _
"AS (SELECT " & _
"[ID_CHK] String," & _
"[Red] String," & _
"[Amber] String," & _
"[Green] String)" & _
"FROM [035 - Meter Point HH Data];"
DoCmd.RunSQL strSQL
End Sub
It keeps saying "Run-time error '3292': Syntax error in field definition.
I have a table and a simple query that pulls results from the table. Nothing too crazy. But, if I were to go in and change some of the data/values in the query results it will change the respective data in the table. I know that this cannot be right. What do I have to do to either prevent the ability to change query results and/or prevent any changes in the query from altering the original data in the table.
View 2 Replies View Related:confused: Hi
I have some 100 questions for which user must answer by selecting any of the options provided using option buttons.
As i cant fit all 100 qtns in one form am splitting it into soem 10 forms.
User answers the qtns in 1st form and clicks on next button to goto to nxt form
thn agn he answers the qtns in tht form and clicks on next button to goto nxt form..so on.. until he answers all the qtns in the last form.
I want to transfer the answers selected from 1st form till the last one..where all the answers are stored in one table whn a submit button is clicked.
please let me kno ASAP if thr is anyway i can do it.
thnk in advance
Hi
I have some 100 questions for which user must answer by selecting any of the options provided using option buttons.
As i cant fit all 100 qtns in one form am splitting it into soem 10 forms.
User answers the qtns in 1st form and clicks on next button to goto to nxt form
thn agn he answers the qtns in tht form and clicks on next button to goto nxt form..so on.. until he answers all the qtns in the last form.
I want to transfer the answers selected from 1st form till the last one..where all the answers are stored in one table whn a submit button is clicked.
please let me kno ASAP if thr is anyway i can do it.
thnk in advance
I have a query called "Stock" containing field like (Item, Description, product_qty)
Another is a table called "Sales" with fields like (Sales_ID, Item, Sales_description, sales_Qty, date_Of_Sale) Item field on sales is a foreign key.
Now what i want is how can i make when the user enters new record, in field "Sales_Qty" the data entered here to be less than product_Qty.
NB; this is because you can not sell more than what you have.