Adding New Field To Existing Table And Form - Getting Error
Jun 8, 2014
I'm trying to add a combo box field to an existing table and form. I added the new field to my existing table and set it up as an combo box added my row sources. Then added the new field to an existing form and now am getting a error stating "The record source "Table name and added field here" specified on this form or report does not exist. When I just make the new field a text box instead of combo box it works just fine.
-Existing Access Database contains tables with 1-2 million records
I would like to add a field[dol] to an existing table[rei]. I need this new field[rei].[dol] to be populated with existing data from another table[main] based on the associated field[main].[account1] or [main].[account2] or [main].[account3].
In the [main] table. There is always data in [dol]. But there is NOT always data in the [account] fields. Sometimes there is multiple account numbers per [dol] but not always.
Customers will ALWAYS have at least 1 [account] number and [dol]. Some will have multiple [account] numbers and [dol]. Sometimes these [account] numbers are the same in multiple fields[account1] [account2] [account3].I just need to do a lookup or something to find the [account#] and pull in its [dol] from the [main] table and populate it in [rei].[dol].
Hi. I have a table with a NAME field and a GENDER field.
How would I code a query so that if the gender is MALE than MR. would be added to the front of the existing data in the NAME field? MRS. if gender is FEMALE?
i.e., the result would be MR. SMITH, MR. JONES, MRS. CARSON...
Please bear with me, first post, trying to get to grips with Access for work!
We (a primary school) had a "bespoke" database set up using MS Access by someone who has long left the area and now we need to make changes and I, as the most computer literate person on site, have been volunteered to make these changes.
My level is beginner (for now) and my first job is to add some new options to a "Titles" table, four columns, six records. Column1 = ID#, Column2 = Male Titles, Column3 = Female Titles, whilst Column4 seems to hold items from Columns 2 & 3.
If I add a futher option, I get the error "Can't perform cascading operation: Entry must be one of the Titles as featured in the drop-down box or in the Titles table.
Now, as far as I can tell, I HAVE added the new option to the Titles table, and they DO show in the drop down box in the main spreadsheet display, BUT the error comes back as soon as I try to confirm the new title.
I am looking for a way to add a calculated field to the end of an existing query using VBA. Is there an easy way to do this?
The data I receive from an external supplier shows monthly data split by column with a new column added in each month. I then need to reflect this by adding a new column to the end of the query. It is currently a manual tweak, but I want to automate this with code.
What I have is a database that I have done some tweaking on and in the meantime the original db has been in use which has added around 200 or so more records in the table.
What I would like to do is to just update the db that I have been working on with the older db table(the one who has the additional 200 records).
EX. DB A(Old DB, Newer Table) DB B(New DB, Older Table)
I want to put DB A table into DB B
Is this a simple fix? Or do I need to write some sort of query to update the records in the old table? I've tried to export the excel file and then import but it puts it in unrelated objects and then my switchboard or nothing works.
tblProductFacilityMM - ProductToFacilityID - ProductIDFK (combined with FacilityIDFK to make a PK) - FacilityIDFK
As I'm writing this out, I am realizing that tlbProductFacilityMM.producttoFacilityID is probably not necessary, but that I don't expect that to have much significance to the issue. So I've setup a query between the two tables:
Code: SELECT tblProductInfo.ProductID, tblProductInfo.ItemNumber, tblProductInfo.JDEDescription, tblProductFacilityMM.FacilityIDFK, tblFacility.FacilityDescription FROM tblFacility INNER JOIN (tblProductInfo INNER JOIN tblProductFacilityMM ON tblProductInfo.ProductID = tblProductFacilityMM.ProductIDFK) ON tblFacility.FacilityID = tblProductFacilityMM.FacilityIDFK;
And used it to create my subform which is simply a drop down box for tblProductFacilityMM.FacilityIDFK. My main form is one that has already been in use for 6 months or so, it is based off the tblproductinfo table and needs to have the option to select multiple Facilities for each ProductID. I inserted the subform, but when I try to select a facility I get an error that reads:
Quote: Cannot Join Records; Join key of tblProductFacilityMM not in recordset.
I have a simple database that I inherited, that contains basic customer contact info. We want to start adding more functionality to the database, so I've done alot of research to learn about how to begin normalizing my data.The existing table does not contain a useful primary key, since we may have multiple individuals from the same company, companies with very similar names, etc.
I would like to add an AutoNumbered field to use as a CustomerID/primary key, but I can't seem to find a way to do so. Here is what I've tried so far:
I have tried to add a field to the table, and make it an AutoNumber data type. When I do so, I can error message saying that I cannot make a field AutoNumber if any other field in the table already has data entered in it.I have tried to create a new table containing only an AutoNumber PrimaryID field, and then import data from the existing table, but that just creates a 3rd table.
Hi, I am fairly new to doing DBA, and I am having trouble adding a new column to a table that is existing. Is there any simple way to do this or does it have to be done throught code? And if so how. Thanks zorter8
How to add a prefix to an existing description in a project table, generated from the project number. Here's a sample of my data:
PROJECT NUMBER DESCRIPTION 01200000 Completed Projects 01601530 Steele Sub
I would like the Descriptions to read: 01200000 MO-20 Completed Projects 01601530 MO-60 Steele Sub
The state, "MO," comes from the first two digits "01" and the coop, "60," comes from the second two digits. I have a table of a thousand or so projects in an Access database that I need to amend the descriptions of to include these prefixes. Is there a simple way to do this in Access or in Excel without writing code?
I'm having a bit of a problem with a database I'm trying to create, what I am trying to do is create a database to handle jobs in an IT workshop. The idea is that you generate the job card and then at the bottom you have a section to enter in the parts that are required for the job, and then have a report that prints out a list of all the parts required for all the jobs under a heading of the job card number.
The problem I am having is how to add this sub form / table to the job card sheet. I tried putting in a sub table, but that wont let me make additions to it, and I tried putting on a form but that wont retain more than one entry per job card (I have put it on continuous form).
So, I have two forms that I am trying to make work the same way.
With F1Entry I can use the combo box in the header to select different request numbers.
With F2Finance I cannot do this. It works if I set the Form Record Source to T2FIN, but when I try to Add Existing Field, something about selector combo box breaks and I cannot select different request numbers.
I am trying to add an existing field from one table into another table but the table Im currently in shows that option to be greyed out. What would cause that option to be greyed out?
I have a table with more than 700,000 records. There are no unique fields or unique combination of fields. I would like to add an AutoNumber field but when I try I get the message:
I have a form (frmCompany) which has two combo boxes (cmbCompany and cmbCity) which is used to add field data into a table (tblCompany). The Company field is the only required field the other is optional.
In some cases I may wish to add a City, at a later date, to an existing Company using frmCompany. I now select the company from the cmbCompany combo box then add the city to cmbCity. The problem is that when I close the form I get two companies in the table with same name, one has a city and one does not.
How can I add a new City to an existing Company, using the form, without adding a new Company?
I am adding a exisiting field which is already available on a Global Table and would like to add it on a local table within the same database. Also bearing in mind the db contains main objects - Tables/Queries/Sharepoint lists/forms/reports
Whats the process in doing this? Once added how does the data get populated?
I'm trying to write a query that will validate a field in an existing table. I want the query to show where any of the 412,000 records fail this strict validation:
AAnnnnnnA
...where A is any letter A-Z and n is a digit 0-9
Clearly I can use the LEN function to check for invalid lengths (anything <>9), but I'm looking for a simple neat expression I can use that will check the format. Does an existing function already exist before I resort to writing my own function in VBA (again)?
Have a table with data in it and I want to add a new field to uniquely identify each record (simple numerical sequence like 1, 2, 3, 4.....). I don't know VBA and don't know SQL.
Tried opening the table in design view, adding a new field with "autonumber" as the data type but get the following error msg: "File sharing lock count exceeded. Increase MaxLocksPerFile registry entry". The table has about 750,000 records in it.
I have a table with more than a million records. I want to add a new column with date equals to e.g.3/14/2012 for all the records. I am using update query, but it is super slow (taking more than a hour)..is there any other way to do this?
I found this wonderful code and would like to add Proper Case upon save. Have tried several variations to no avail. Any help would be appreciated.
Private Sub cboDayshiftPatent_NotInList(NewData As String, Response As Integer)
On Error GoTo Err_ErrorHandler
' provide text constants to reduce text later and allow for faster execution ' due to added speed from the compilation of constants Const Message1 = "The data you have entered is not in the current selection." Const Message2 = "Would you like to add it?" Const Title = "Unknown entry..." Const NL = vbCrLf & vbCrLf
'connection and recordset object variables Dim cn As Connection Dim rs As ADODB.Recordset
' show message box and evaluate if the user has selected Yes or No If MsgBox(Message1 & NL & Message2, vbQuestion + vbYesNo, Title) = vbYes Then ' open a connection to the connection object Set cn = CurrentProject.Connection ' initialise the recordset object Set rs = New ADODB.Recordset ' using the recordset object With rs .Open "lkupDPatent", cn, adOpenStatic, adLockPessimistic ' open it .AddNew ' prepare to add a new record .Fields("Dayshift") = NewData ' add unfound data into field .Update ' update the table .Close ' close the recordset connection End With Response = acDataErrAdded ' confirm record added Else Me.cboDayshiftPatent.Undo ' clear the entry in the combobox Response = acDataErrContinue ' confirm the record is not allowed End If
Exit_ErrorHandler: ' de-initialise our object variables Set rs = Nothing Set cn = Nothing Exit Sub
Err_ErrorHandler: ' display error message and error number MsgBox Err.Description, vbExclamation, "Error #" & Err.Number Resume Exit_ErrorHandler
I was tasked by my CFO yesterday to add a new element to my existing database. I will try to keep what I am trying to do simple.
Basically we do finance for multiple projects. each project has employers.
My database records these employers names, SSN, dates registered, program they are in, and a few other elements as well.
What I have been tasked to do is create a new table with the project managers in that table. this way in a query or report i can pull "sally sue's" projects or whoever I needed to. There are many PM's who have more than one project.
Here is what I have for relationships:
On the Project Managers table I have a PK for ID and then the PM Name as a second field. the ID field is linked to the Programs table which has a PM ID and Program name
The Program table is also related to the employer table which has all of the employers and their info. the relation between the two tables is the Program Name.
So when I run a query or report my goal is to be able to pick any project manager and get the associated count of employers under all of that projects managers programs. I have gotten errors when running queries. Perhaps I have the relationships set up wrong?
Each month I receive a new excel spreadsheet (alpha Roster), Last month I created a form so that I can track certain things off of the Table (spreadsheet), I just received the new Spreadsheet for this month and was wondering if I can use the existing form and how hard it is to link it to the new spreadsheet? Is that even possible? I don't want to have to re create the form every month, I would like to just bring the new alpha roster in and be ready to work.
