Adding Up Values From Multiple Queries
Jan 30, 2005
Query 1:
Field #1: User Name
Field #2: CountOfUserName
Query 2:
Field #1: User Name
Field #2: CountOfUserName
Query 3:
Field #1: User Name
Field #2: CountOfUserName
Query 4:
Field #1: User Name
Field #2: CountOfUserName
I want to create a Query that will add
[Query 1].[CountOfUserName]+[Query 2].[CountOfUserName]+[Query 3].[CountOfUserName]+[Query 4].[CountOfUserName]=
[My Query].[TotalCountOfUserName]Group by UserName
It seems difficult.
View Replies
ADVERTISEMENT
Sep 21, 2007
Hi,
This may be a dumb question, but I've got kind of a question about adding values.
I have a subform that contains a department name, and it's waste totals (in Kilograms) for the day, for a particular company. The company information is the main form.
Whenever I start a new department, the totals, and category names start blank (different departments could produce different waste).
I'm trying create a query that gives me the total value for each Category of waste. However, I keep getting all the seperate values returned?? As apposed to a total. For example.
Company A has two departments:
Office and Production.
For Office they had 20 Kg of plastic bottles and Production had 20 Kg of plastic bottles.
I want to be able to total the weight of plastic bottles...it's just not working../
?
Any advice?
View 1 Replies
View Related
Dec 6, 2012
I have a field named Supplies Expense. As an analyst inputs a business's expenses, it may require multiple entries into this one field. What is the best way to accomplish this?
For example:
Supplies Expense (Field Name) [$0.00]
The analyst has the following data:
2009 Financial Statement
Paper $50
Depreciation Expense N/A
Ink $100
So, going down the list, the analyst goes into access and enters $50 for paper then later needs to enter $100 for ink.
What is the best way to combine these multiple entries into a single Supplies Expense field and allow for a quality check of the individual numbers at the end of the project?
View 8 Replies
View Related
Aug 13, 2015
I've got a table with data that's been imported from Excel. I need to run a query that pulls the same values of field one and adds the values of field 2. For instance:
Field 1; Field 2
Jones; 200
Smith;150
Jones; 300
Smith;100
In this example, I need the sum of field 2 for the records where Jones is the value in field 1.
So the result in this case is that records where Field 1 = Jones, Field 2 = 500.
View 2 Replies
View Related
Jul 4, 2013
I use the output of a query (qryTally) to set as my values to a table (tblOrderCountDaily) which sets all the count of a product ordered during a cmdbutton was clicked. If cutoff wasnt clicked for that day, it would create a new field setting the field name as the date. Now, if i click again the the cutoff button, it would check again if the field exists, if yes, i would add the value to the previous value.
Code:
Private Sub CutOff_Click()
Dim db As DAO.Database
Dim tbl As DAO.Recordset
Dim strSQL As String
Dim CheckOut As String
[code]...
View 1 Replies
View Related
Sep 24, 2014
I am trying to map certifications done by colleagues in my department.There are 4 certifications and I have which I have pulled out from the Certifications tables using individual query for each certification.Now, I want to add "Certification-Name_Certified" col which will have "yes" or "no" values for each certification to the master data of the department personnel as it only have unique records using a query.
View 4 Replies
View Related
Mar 2, 2014
I have a table having fields start date and end date. I need to calculate difference in the dates and store the values in a new column in the same table. I am able to write the query for this but am clueless as to how to put in these values in a new column in the table.
View 2 Replies
View Related
Oct 23, 2013
I have a quick (hopefully) query about adding up consecutive values to get a running total.
Currently I have the following
ID Value
1 0
2 5
3 2
4 0
5 1
6 30
7 2
etc...
I am looking for a way to get a running total up to the point of a 0 then restarting. e.g.
ID Value Running total
1 0 0
2 5 5
3 2 7
4 0 0
5 1 1
6 30 31
7 2 33
View 12 Replies
View Related
Jun 24, 2014
I have two tables one with all the personnel (tblPersonnel) I'm tracking, another with different report names (tblReports).
For each report, there are different years that it's valid for.
On the reports table, I have three columns, ReportID, Report_Title, and Years_Valid
I'm using a lookup on the personnel table that stores the report name as the ReportID.
What I want to do is in a query use the Years_Valid column to automatically generate review dates bases on dates already in the database.
View 6 Replies
View Related
Aug 12, 2013
If I want to sum the percentages from April, May and June only if a column is Not Null, how would I do that?
example
Tbl 1
PK, Month
Percent
Tbl 2
FK, Month Enrolled
Qty of Rx in the 1st month enrolled
Qty of Rx in 2nd qtr
Base (if Qty of Rx in 2nd Qtr is null then Qty of Rx in 1st month enrolled)
If Qty of Rx in 2nd QTR is NOT NULL then QTY of Rx in 2nd Qtr * Sum of April Percent+May Percent+June Percent, otherwise Qty of Rx in 1st month enrolled * Month Percent
Im getting stuck on how to sum the percents of April, May and June and then multiplying the result times the Qty ONLY IF the field is not null.
I only know how to create Query's using the design mode. I dont know how to write SQL statements.
View 1 Replies
View Related
Jun 21, 2014
modify the code below to Show the LocationName in the Schema Column instead of the MPID? I attached a pic showing the relationship between the two tables which contain the data I'm trying to query.
SELECT [Locations Query].LocID, Qry_MPLoc.MPID AS Qry_MPLoc_MPID, [Locations Query].Location, [Locations Query].Schema
FROM [Locations Query] INNER JOIN Qry_MPLoc ON [Locations Query].[LocID] = Qry_MPLoc.[LocID];
View 11 Replies
View Related
Feb 22, 2014
I have a table where there are multiple vehicles, each identified by their vehiclenumber. Each record holds the vehiclenumber, date and odometer reading. I need to figure out how to calculate records in this table per each vehiclenumber.
Below is a code that works, but only when i have each vehicle with the same vehiclenumber.
SELECT tblOdometer.VehicleNum, tblOdometer.ODate, tblOdometer.Odometer, tblOdometer.Odometer AS OdomAlias,
Nz(DLast("Odometer","tblOdometer","[Odometer] < " & [OdomAlias]),0) AS Previous, [Odometer]-[Previous] AS Difference
FROM tblOdometer;
View 4 Replies
View Related
Sep 22, 2014
For my study on academic research I need to match patents that refer to academic research as prior work with the actual prior work.
I have two tables (see attached images below).
One regarding AcademicPublications (AP), which is neatly organized with title, year, journal, volume, pages, first author, etc... 480,000 rows
One regarding Patentswhere all this information is hidden within one field, in the most messy way possible... for instance, a field could have:
Quote:
Sugita et al, "Nonsurgical Implantation of a Vascular Ring Prosthesis Using Thermal Shape Memory Ti/Ni Alloy (Nitionl Wire)," Trans. Amer. Soc. Artif. Intern. Organs, vol. 23, pp. 30-34.
or
Quote:
Willingham et al., Cell 13, 501-507 (1978).
Or many other ways.
I want to create a new table that is set up like this:
Patents.PatentNumber | AP.ID | Patents.Reference | AP.Title | AP.Year | AP.Volume | AP.PageStart
The question is: How do I match different fields from one table on one field of another and make it return another field (the ID)? Some references are too horrible to match, but I need as many as I can get.
I can imagine two queries would give me the bulk:
A match in [Title] AND [Year]
A match on ([SourceTitle] OR [AbbreviatedSourceTitle] ) AND [Volume] AND [Year] AND [PageStart]
I understand that I have to make use of the Like "*"&[value]&"*", but how do I make it return the matching ID?
View 10 Replies
View Related
Mar 21, 2014
I am having an issue with my running total query.
It consists of a running total per vehiclenum. All data comes from one table.
It works properly only on the first vehiclenum of the query. After that, the first "previous" odometer reading of each subsequent vehiclenum starts at some erroneous number, throwing the remainder of each vehiclenum running total.
Here is the code for the query,
SELECT qry_ODO_TotalSub.ID AS OdomAlias, qry_ODO_TotalSub.ODate, qry_ODO_TotalSub.VehicleNum, qry_ODO_TotalSub.Odometer, Nz(DLast("Odometer","qry_ODO_TotalSub","[ID] < " & [OdomAlias]),0) AS Previous, [Odometer]-[Previous] AS Difference, Nz(DFirst("Odometer","qry_ODO_TotalSub"),0) AS StartOD, [Odometer]-[StartOD] AS RunningSum
FROM qry_ODO_TotalSub
ORDER BY qry_ODO_TotalSub.ID;
View 4 Replies
View Related
Nov 19, 2012
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
View 2 Replies
View Related
Jan 20, 2014
I am currently developing a database to provide a friend with an auction tracking and ordering system.
I will have a number of questions the first is related to the Home Page/Dashboard/Summary form I am creating. I basically have a few sections, one of which is a combo box offering the user to select an auction to view in the summary section. This summary section contains the list of lots but I also hope to to expand on this and create multiple text boxes, each containing the answer to a number of queries (totals etc).
I have written all the queries and can see the results however as the form does not have a record source I would like to know how to make each text box populate with the result of different queries (ideally in vb - I am using ms access 2010)?
I have tried a few things, control source doesn't apply as I have no record source (i guess). I investigated Dlookup/Dcount but am unsure if these apply for the same reason. I understand I am likely to need a recordset etc in vb and have already tried a few things but unfortunately none of them work.
View 1 Replies
View Related
Dec 29, 2006
I have a report that adds time for as many as six people. This isssue is when the time goes over 24 hours in total it drops the hours. The field(s) is formated in "short time" format.
Can anyone help resolve this???:confused:
View 6 Replies
View Related
Sep 28, 2005
can someone help with this. I have 2 fields in a query
tbl1_nbil = 3
tbl2_nbil = 0
however when I add them using
Bill = [tbl1_nbil] + [tbl2_nbil], I only get a few of the added numbers in the calculated field. In some records it works, but in the majority it does not
It onl seems to add when both fields are greater than zero
tbl1_nbil : tbl2_nbil : Bill
1 : 1 : 2
1 : 0 : 0
2 : 1 : 3
0 : 2 : 0
4 : 0 : 0
View 1 Replies
View Related
Oct 15, 2004
I have this problem. I've made a table called "producers" and a main form based on this table. I've also made a table called "orders", with several data regarding orders, and a secondary table based on the "orders" table. These tables are linked. So these forms show the orders made by each producers.
So, I want to show in the textbox "total" (in the footer of the sub form) the result of this function
sum([kath_dik])-sum([pistosi]) for each company. [kath_dik] and [pistosi] are text boxes in the sub-form. (scroll the sub form to the right end)
I tried the formula above end get an error message. Thanx in advance
View 2 Replies
View Related
Mar 3, 2005
I've been having trouble trying to figure out how i can add the values within one column. I have a field named Cost, under that field i have serveral rows of data. I would like access to add all the numbers under that "cost" field. Im not sure how this is done. Can anyone please help ???
thanks
EM
View 6 Replies
View Related
Sep 22, 2006
i need to add values of about 20 items and store them in a feild of their own. any ideas of how. Tthe items each have their own value but i need to be able to add all of them up and divide the by the total p[ossible points. i know their is a way to do so but i cant get it to work on my own it keeps giving me an aggregate error.
View 1 Replies
View Related
Aug 13, 2015
I am trying to set up a estimation form. What I want to accomplish is to have multiple checkboxes that a user would select the boxes relevant to his project. From these selections there would be a sum created. Each box could have different values. I tried using the default value but when I unchecked and rechecked it went back to using -1.
I am thinking I will need to assign values through a query but I want to show the sum on my form.
View 6 Replies
View Related
Feb 8, 2007
Am I missing something simple here? I have several text boxes, which I want to add the values. I have tried these formulae, but dont work:
=Sum([Postage],[ProgTotal])
=Sum([Postage] + [ProgTotal])
=DSum([Postage],[ProgTotal])
Any help would be greatly appreciated!
View 7 Replies
View Related
Oct 16, 2007
Hi all,
can i use a listbox control NOT IN A PROGRAMATICALY way, in a table to allow user choose one of some pre_defined values (for example 1,2,4). This field will be used as a parameter in an communication with HW, that's why its crucial not to let users choose whatever value that they want.
Thank you
View 3 Replies
View Related
Jun 20, 2007
Hi,
Im trying to create a database for a stock control system. I have a slight problem, the stock is in two places. So what i have to do is put in the values of stock in each place and then display the value of those two added up in the table. What is the best way to be able to do this?
View 12 Replies
View Related
Aug 13, 2007
Hi folks
I have what I reckon is a complex problem that I need to solve for my warehouse.
We hold replacement parts for the machines we sell. Some parts can be subsititued for others, so where we possible we use these parts to simplify our warehousing. Every day we get a file with demand for each part in and we look to see where we could move this demand to for those parts with a common alternative. When we find one we remove the demand from that part in the database and add it to the demand for the common part.
In operational terms we upload the demand file (.xls) to a table of the following structure
Date_added - Date
Part_number - Text
QTY - number
Thus the table holds daily demand by part. What I would like to do is use a update query to:
a) Identify the parts that have common parts to which they can be moved.
b) Add that demand to that of the common part today.
c) remove it from the original part (set to zero).
Idenitfying the parts and restricting to todays date is not a problem, however the additions and deletions are.
Any suggestions?
Thanks in advance!!
View 1 Replies
View Related
