All Dates In Range
Mar 24, 2006
As part of a larger issue, I am trying to figure out how to have an Access 2000 select query produce all dates in a date range into one field on the query. Assume at this point there are no tables in the query.
If 01/01/06 (mm/dd/yy) and 02/01/06 is used, then it'd list all the dates between those two, inclusive.
Is this even possible?
Thanks for looking.
View Replies
ADVERTISEMENT
Mar 17, 2008
I have a client that wants to enter a range of dates in a query of when they will call that person back. Then they want to be able to type in a range of dates and have a make table query show them all the people that fall in between these two dates....is this even possible???
Ex.
Joe March 3 to March 8
Mary March 4 to March 9
John March 5 to March 10
So if they type into the query March 3 to March 6 all three people should show up because one of the dates specified lies within the parameters they are asking for.....man I am out of ideas
Anyone.....
View 5 Replies
View Related
Oct 10, 2005
My dates are stored as numbers (long integers), because they need to be in the form YYYYMMDD, and I couldn't figure out how to enter them and keep them in that format as Date/Time.
Anyhow, I have a form with a textbox and a button. When the user enters in a date range, I need totals to show up for only dates that are in-between and/or equal to the date(s) typed in the textbox.
For example when the user types in 20050904-20051004, and pushes the button, a display of totals will be displayed for only those dates and those in-between. If the user leaves the textbox blank, and pushes the button, I want totals from all dates to be shown.
As you may know from my previous question, I am a relative newbie to Access. Suggestions about how to do this maybe even how to derive and present the totals, and especially specific code will be very helpful and VERY much appreciated.
View 6 Replies
View Related
Jul 12, 2005
I need to print out a report from a start to end date. But theres a catch i also need to print those items from previous months that are not yet resolved. I have a checkbox that tells me if the record has been resolved or not. Is there a way that I can put both the conditions into my query, one for the dates of transactions and the other being all outstanding items no matter what the date.
View 2 Replies
View Related
Nov 19, 2007
Is it possib;e to create a query that would all the dates withn a range of Date1 and Date ?
Ex if I have
Filed Date1 Date2
x 1/1/07 1/3/07
c 1/6/7 1/8/7
for query to show
Field Date
x 1/1/7
x 1/2/7
x 1/3/7
c 1/6/7
c 1/7/7
c 1/8/7
View 1 Replies
View Related
Mar 19, 2006
I have a form and table which I use to collect some reservation information. I then have a subform/table which I use to enter the actual dates of for that reservation. This subform/table has only three fields. The foreign key field that links it to the main form/table, the date(s) entered and the subform/table autonumber primary key.
What I would like to do is use an ActiveX type of calendar as the subform and be able to select a range of dates. If someone is making a reservation for 8 days, I want to be able to select that range of days on the calendar and have create/enter all 8 of those records in the subform/table.
I would much prefer this as opposed to simply collecting a single IN date and a single OUT date.
Anybody have any ideas?
View 1 Replies
View Related
Jun 20, 2014
I want to create a form that ask the user for a start date and an end date. Then when the click OK it will append a record to a table for each date and each date in between based on the increment. For example the start date is 6/20/2014 and the end date is 6/27/2014 and the increment will be 1 day. I want to add records to my table for:
6/20/2014
6/21/2014
6/22/2014
6/23/2014
6/24/2014
6/25/2014
6/26/2014
6/27/2014
I have the form setup to to prompt for the start and end dates. It's the VBA coding to do the dateadd function in a loop
View 3 Replies
View Related
May 26, 2005
I am tring to add a number of years to a dob. I'm doing this by adding my
date+years*365.26 I get a string of numbers. I then convert the number in
the next column to actual date again. I'm getting the correct date. I've tried unsuccesfully to use the dateadd function.Now I want my criteria on that column to allow me to return only date in a given to from period of my choosing. I want to determine the date range each time I run the query.
An example would be:
DOB age date I need to follow up
5/15/1935 + 75 = 5/15/2005
Then I request dates between 4/1/05 and 5/30/05 and this date is returned.
I've tried the between_and functions but nothing is returned. I'm guessing it's because the column is still a calculation and not a true date.
I've tried: Adding a column to my query to convert the number string back to
date format (criteria failed to return a result). Adding a second column
that ='s my converted number to date column (criteria failed to return a
result)
And I've tried the make table query and then run another query from the new table. I can't seemto make this happen. I think it's not recognizing my data as a date because it isn't returning any data.
Is ther an easier way to: Add a number of years to a date and have it return
a date and not the number string?
If not is there a better way to convert the string to a date?
Is there a way to get my criteria to recognize the date and return date
between my begin and end dates?
Thanks
View 14 Replies
View Related
Apr 18, 2007
4/11/2007 1:01:28 AM
4/12/2007 2:02:52 AM
4/13/2007 4:21:30 AM
4/14/2007 2:22:21 AM
4/15/2007 3:34:53 AM
4/16/2007 4:02:37 AM
4/17/2007 5:03:15 AM
4/18/2007 7:17:34 AM
I need some helps
I have a table with date + time, how can I query so that it retrieve a 7 days range from today and go back ti 7 days
i though this should work (it works if the the table has date only no time)
Between Date() And DateAdd("d",-7,Date())
thanks
View 2 Replies
View Related
Oct 9, 2013
I have a query and I want to make a certain range of dates for the query to run. For example: from 10/6 to 10/7. What would be a parameter for this range of date? Should I put it on a query?
View 11 Replies
View Related
Jun 7, 2013
I am using Between Me.Firstdate and Me.Lastdate in a query. I thought that it would include both Firstdate and Lastdate in the range. But it appears that it does not. Is there a way to include Firstdate and Lastdate in the range of dates?
View 13 Replies
View Related
Mar 19, 2013
I have a table called StockTable with the following fields Location, Status, Serial, Make, Model, LastDate, DotNumber
I also have a table called FCDateRange with three fields
DateStart DateEnd and DotNumber
For example
3/7/13 - 3/13/13 - 1
3/14/13 - 3/20/13 - 2
Im trying to figure how to write a query that if the lastdate from the StockTable falls during the DateStart and DateEnd fields it will assign it the number in the DotNumber field
View 2 Replies
View Related
Feb 19, 2014
Unable to use Between query without pulling dates out of range.I
f I set the Criteria to Between [Enter the start date:] And [Enter the end date:] and input the dates 1/2/2014 & 1/15/2014 i'm pulling data for those dates but for year 2011, 2012, 2013 and 2014 as well.
if I enter in Between #1/2/2014# And #1/15/2014# it gives me just the dates I requested.I need to be able to have a user use the macro and just enter in the dates they need data for.
Also, I am using the criteria on a date ime field that I have set up an expression on - CreateDate: DateValue([TABLE]![date])the date in the table is stored with time and I just need to show the date.
View 3 Replies
View Related
Oct 14, 2014
My table has many records for each month. I am creating a report that will display only the records in one month of a year. I have been able to create a form that gives the user the choice of the Month and Year for which to create the report. The code I am using to create the combo box is:
Code:
SELECT DISTINCT Month([QTDate]) AS MoNum, Format([QTDate],"mmmm yyyy") AS MoName
FROM MainTBL
ORDER BY Month([QTDate]);
What I need to do now is create the query for the report that displays all records for the chosen month and year. If I simply reference the combo box, all it shows is mmmm yyyy and the days are missing so the query doesn't work. What do I need to do to create the query so it displays all days within the month and date selected?
View 6 Replies
View Related
May 12, 2014
Any way to have a form with Dates as column headers to update a table where the dates are stored in rows???
The table set up is like this:
tblOpHdr
DiaryID (PK) - OpDate (Date)
tblOpDetail
DiaryID (FK) - CostCode - MachineNumber - MachineHours - etc
I'm just wondering if there's any way I can do this with a datasheet or a crosstab type setup?
It's Access 2010.
View 1 Replies
View Related
Aug 28, 2013
I have built a query to calculate the expiry dates of training courses but I am trying to input a criteria so that only dates within 90 days of todays date show. I am using Date()<90 but it doesn't return the correct information. What the criteria should be for this?
View 1 Replies
View Related
Apr 9, 2015
I have a table of records, which has within it two date fields (effectively, a 'start' and 'end' date for that particular record)
I now need to create a query to perform a calculation for each date between the 'start' date and the 'end' date
So the first step (as I see it anyway) is to try to create a query which will give me each date between the two reference dates, in the hope that I can then JOIN that onto another query to perform the necessary calculation for each of the returned dates.
Is there a way to do this?
So basically, if for a particular record, the 'start' date is 01-Apr-2015 and the 'end' date is 09-Apr-2015, can I produce a dataset of 9 records as follows :01-Apr-2015
02-Apr-2015
03-Apr-2015
04-Apr-2015
05-Apr-2015
06-Apr-2015
07-Apr-2015
08-Apr-2015
09-Apr-2015
(The *obvious* solution would be to create a separate table of dates, from which I could just SELECT DISTINCT <Date> Between #04/01/2015# And #04/09/2015# - but that seems like a dreadful waste of space, if that table is only required to generate the above? And it would have to cover all possible options; so it would either have to be massive, and contain every possible date - ever! - or maintained, adding new dates as necessary when they are required. Seems horribly inefficient!)
Is it possible to just select each date between the two reference dates? Or can you only query something which exists somewhere in a table?
View 4 Replies
View Related
Sep 7, 2006
Hiya-
I have a database with 5000 entries, corresponding to about 10 entries for about 500 people. Each of the entries is dated, and I need to calculate the time intervals between each person's sequential entries in the table.
One way of doing this is to create another column that contains the date of the previous entry. I can then use DateDiff to subtract one date from the other and give me the difference in days.
This approach falls down if I then work with only a subset of the entries - I would have to re-enter the previous entry dates as the time intervals would have changed.
What I really need is a way of subtracting the date from the date in the cell directly above it. Will Access let me do this, or is there a better way?
Many thanks, Jules.
View 3 Replies
View Related
Jul 8, 2014
I have two tables with dates. Between (!) every two following dates in table1, I want to know the number of dates in table2. How do I write an SQL query for this? The tables I have are up to a few hundred records in table 1 and a few thousand records in table2. So to prevent that this takes hours I need a fast query.
To explain the query I need, for example:
table1
01/01/2014
15/01/2014
17/01/2014
30/01/2014
table2
01/01/2014
02/01/2014
05/01/2014
17/01/2014
18/01/2014
20/01/2014
21/01/2014
25/01/2014
So the answer of the query would be 2,0,4.
Explanation:
Between 01/01/2014 and 15/01/2014 in table 1 there are 2 dates in table2 (01/01/2014 is not included between the dates)
Between 15/01/2014 and 17/01/2014 in table 1 there are 0 dates in table 2
Between 17/01/2014 and 30/01/2014 in table 1 there are 4 dates in table 2
View 2 Replies
View Related
Nov 15, 2011
I have a master table which shows all transactions per record (person) over a financial year.
Each record person has a seperate package period over which their spend needs to be measured. Therefore although I have all their transactions for the year, I only want to sum their transactions between their given [start date] and [end date] which are in columns.
I need to be able to create a field which sums all expenditure per record between the start and end dates
Name Start Date End Date Invoice Date Amount
Matt 15/5/11 15/9/11 1/11/11 £100
Matt 15/5/11 15/9/11 7/7/11 £200
Matt 15/5/11 15/9/11 12/12/11 £200
In this case I would only want to sum 7/7/11 as this is between the start and end dates
I want to write something like sumif([Invoice Date] is between [start date] and [end date] - not sure where or how exactly
(The start date and end date will always be the same per person)
Is this possible in access?
View 10 Replies
View Related
Nov 3, 2005
Hi,
Please bear with me here as it's a little involved.
I'm doing a staff profile website which includes a section where they can enter their annual/other leave details.
I decided to store their leave in two fields Start_Date | End_Date rather than each individual date that they took - the short and wide approach vs long and narrow.
This has left me needing to do a query that would return all the dates between the start and end dates inclusive.
Example:
StaffID---Start_Date---End_Date
---1-----12/12/2004--14/12/2004
Returns:
StaffID---Leave_Dates
--1-------12/12/2004
--1-------13/12/2004
--1-------14/12/2004
I appreciate i could do this using some script to loop through a recordset and build an array of dates but i wondered/hoped that it could be done using SQL.
As it is an asp page i can't use user defined functions in a VBA module in Access so the solution would need to be pure SQL.
Is this possible?
Any help v.much appreciated.
TS
View 3 Replies
View Related
Apr 4, 2012
I have a scenario where the first three rows of date which have dates of 4/1, 4/4/ 4/6 with ndc 5513026701; next six rows that have dates from 4/8 to 4/20 with ndc 5513014801; next three rows that have dates from 4/25, 4/27, 4/29 with ndc 5513026701.
The issue I am having is I do not know how to have separate min/max dates for ndc 5513026701 since when I group by ndc 5513026701 min = 4/1 ; max = 4/29. I need to have min = 4/1 and max = 4/6 for one row and another row of min = 4/25 and max = 4/29.
Any easy way to sequentially create min/max for each ndc 5513026701? I wasn't sure how to verbalize this so I have attached a sample worksheet.....
View 2 Replies
View Related
Aug 18, 2014
I'm not sure if I am biting off more than I can chew. I have a text field in each record in my database (Inherited) The db has nearly 5,000 records. I would like to split the field into records in a seperate table. An Example of the table as is now;
Code:
MemberIDBoats
5882Opossum(78-80) (87-89) Otter(80-84) Opportune(91-93) Turbulent(97-00).
5883Astute Auriga Aeneas Affray Amphion
2407H34 O10 Porpoise Trenchant Tapir.
I want to create a table as follows;
Code:
MemberIDBoatFromTo
5882Oppossum19781980
5882Oppossum19871989
5882Otter 19801984
5882Opportune19911993
5882Turbulent19972000
5883Astute
5883Auriga
5883Aeneas
5883Affray
5883Amphion
Etc.
Is this possible in one hit or do I need to process the records without dates first and then run another process to split those with Dates? I say dates but the field is a text field. About 15-20% of the records contain dates which are always enclosed in parenthesis.
View 14 Replies
View Related
Jan 2, 2013
Is there a way in this program to create a list of dates between 2 dates?
i.e I have Arrival Date and Departure Date. Is there a function or expression that will list all the dates on and between?
View 2 Replies
View Related
May 12, 2006
I'm trying to figure out how I can set a parameter on my query to search for any activity that occurs within a month, that falls within a date range. Specifically:
Criteria TextBox: 4/2006
Activity Start: 3/6/2006
Activity End: 5/5/2006
I want this activity to show in my query because the time between start and end occurs during the month of April. It's no problem setting this up for a specific date, ie 4/1/2006, but I don't know how to do it for an activity that occurs all days between 4/1/2006 and 4/30/2006..or for one that starts 4/12/2006 and ends 4/18/2006, or starts 4/12/2006 and ends 5/9/2006. etc.
View 2 Replies
View Related
Jun 18, 2006
Hi All,
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
View 1 Replies
View Related