Allow Changes To Form/control Properties To The Design Mode
Sep 20, 2005Is there a way to allow edits to the properties of objects/controls only in Design view and not in the Form View?
View Replies
ADVERTISEMENT
Forms :: Subform Shows In Design Mode But Not In Form Mode?
Sep 22, 2014I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
View 3 Replies View RelatedForms :: Updating Form Properties Dynamically - Command Button To Display Mode
Apr 16, 2014I have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code:
Sub tglEditBt_Click()
'-------------------------------------------------------------------------------
' Circular toggle button to change display mode of the form
' ReadOnly - Edit - Add
'-------------------------------------------------------------------------------
' On Error GoTo NotFound
Dim ForName As String
Dim strSQL As String
Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
Form Page Not Opening Properly But Cannot Get Into Design Mode
Jul 5, 2006Hi.
I have put much time in designing a form.
After exiting and saving it, I cannot now open it. Only the Page Header shows, and I cannot get into 'Design' mode. I have tried repairing and compacting to no avail.
Any ideas?
Russ
Queries :: Crosstab Design Is Slow When Opening And Saving In Design Mode?
Oct 6, 2014I have had to use my first crosstab queries.
I now understand that when opening and saving crosstab queries Access (2010) runs that query to ascertain the column names. Unless you hard-code them. Running the query takes at least 20 minutes.
I have hard-coded where I can, but one report takes arbitrary dates so I can't hard-code them.
I believe that turning off AutoCorrect might make a difference to whether the query runs - but I don't want to turn it off.
Properties Sheet Window Does Not Appear In Design View Of A Form
Jul 13, 2012I am working in the design view of a form, the controls properties sheet disappeared-gone and even clicking the properties sheet button it does not come back.
View 1 Replies View RelatedForm Opening In Full Screen Mode Instead Of Size Set In Design?
Aug 9, 2012I just imported all of my objects (tables, forms, etc.) into a brand new database file and all of my forms are now full screen instead of the size I set them to in design. What caused this? I can't get them back to their normal size.
I am using Access 2007 but imported files into 2003 .mdb file.
Form View
Design View
How it should look?
General :: Removed Submenu Access On Login Form - Cannot Switch To Design Mode
Apr 21, 2015I'm working on a login form and *not thinking* I removed access to the submenu. I had already set the form up so that you either login correctly or exit the program. I'm working in code for the form and I know it's possible to reactivate the menu in code, I just don't know how. And I can't switch to design mode. The form is set up to not allow anything to happen until the correct login has been entered, and I either had a typo when I set up my test login or the program is bugged and only says it's incorrect....
View 1 Replies View RelatedForms :: Unable To View Object Properties In Form Design View (Access 2010)
May 16, 2014Why the ability to view the properties of an object within a form is not available when you double click on it in design view?
I was happily working away double clicking on a command button to edit some code when for some reason the next time I tried to edit it did not open up for me.
I was unable to access it even by right clicking on the object & selecting properties as that also appears to be disabled, not greyed out or anything but just does nothing when selected.
Have I inadvertently changed a setting somewhere that prevents the properties from being displayed?
Toggling Design Mode On / Off
Sep 1, 2015I have an old db. I would like to see the forms and tables so I can select them and make changes. I know there is a way to access those items on startup but I have forgotten how. When I bring up the db I see a form and I can get into VB for that form but I cannot see any embedded table, forms reports, etc.
View 3 Replies View RelatedForms :: Allow Edits In Design Mode
Jan 9, 2015I have a form which was locked down (ie Allow additions, allow edit and allow deletions were all set to no) on the Form property. I want to change this to allow edits so in design mode I changed the Allow Edits property to Yes.
I then went to Form view and was able to update fields on the form. When I exited the form it asked me if I wanted to save the changes so I clicked yes.
On going back into the form I can no longer update the fields I could before. Going into design mode I can see that Allow edits on the form property is set to no again.
What is happening here. There is nothing in the on load or other events to set this to no, besides this shouldn't change the form property should it?
I know I can get around it my setting the property in the form itself but why is the property getting reset in the first place.
Access 2010.
Access Closes In Design Master Mode
Mar 27, 2008I have an application that when in design master shuts down when I attempt to open a certain form. I have traced the problem to a linked field from another table, by creating a new form and ommitting the said field, problem is its a required field!
If I copy the database (Backup) and run it as a replica it does not happen, if I then convert the replica to design master it happens.
Any suggestions please??
Steve
Queries :: Query Design Defualts To SQL Mode
May 7, 2013When I click on the design mode of a query object, generally MS Access defaults to the GUI design view... but in this one application, the design view is pulling up queries in SQL mode first...
If I want to set it to the GUI design mode, I have to either hit design again or run the query then hit design to have it pull up in the regular design mode. Is there a setting or something I am missing? Seems that it only does this when the SQL code is reltively involved (i.e. the simpler queries pull up in the normal design view.
Is There A Way To Alphabetize Table Field Names When You Look At Them In Design Mode?
Jul 20, 2006Hi.
Other than manually moving fields in a table in design mode, can I get the fields alphabetized?
Russ
How To Apply Self-defined Function In Query Design Mode?
Feb 8, 2008I want to extract the integer part of a string data as a single field.
How to apply self-defined function in Query Design Mode?
any hint is appreciated, thank you in advance~
Forms :: Design Mode - Changing Tab Order Does Not Work
May 28, 2015I am going into the Form Design mode
Click in the subform
I then set tab order by selecting the box and moving the field up.
Looks correct and then I click okay.
The subform does not change.
I go back into design mode, click in subform and select tab order and it looks correct????
Forms :: Field Reference Lost Until Design Mode / VBA?
Oct 7, 2013I have a form/subform that requires some fields from the Switchboard for its criteria. Last week due to no action on my part, it started asking for those values as Parameters instead (Forms!Data!txtInspDate), etc! The new form loads, but of course it is blank with no data. This happens if I load it from a command button or from the navigation sidebar... UNLESS I first load the switchboard in Design Mode, go to VBA window, then reload the Switchboard in Form Mode and press the button. From then on until I close the database, everything works fine!
View 9 Replies View RelatedModules & VBA :: Copy A Control In Form Design?
Oct 24, 2013I need to duplicate a number of controls on a form. They are all acCommandButton types, but they have different images, sizes etc.
Anyway, my thought process was if I have a "template" acCommandButton then when I create my new controls if I could use this template then the code I have hanging off them (I have a function being called on the onClick event, borders are set to hairline, themes turned off and various other settings) would be copied. Save me trying to set them all individually.
So, my question is, can I "copy" a control in form design through VBA. Once I create the copy of the control I can then change the couple of properties I need to and "hey presto" I have skipped a load of settings that I don't need to set.
At the end of the process when I rename my form I can delete my template control and I have a working form.
Forms :: How To Prevent Users From Opening Database In Design Mode
Nov 12, 2013I just finished a small Access-2013 database (accdb format).
Now I want to make it available to users.
How do I make an 'executable' (meaning that tables, forms, ... cannot be opened in design mode)?
Control Properties
Mar 14, 2005hi all,
i m referencing a control like me!<controlname> in my code.
but in 1 screen its not giving me option after me!<ctrlname>.(only value property).
but in other screen i m able to access the properties.
So what could be the reason for this.I particularly want to access the enabled property to set it dynamically.
Thanks
Hotkey For Toggling Between Field Row In Table Design View And Its Field Properties?
Feb 15, 2013I am making a new Record in the design view of a table (creating a new field in the table), and I am assigning it a date type, is there a hotkey that will select the field properties sheet so that I can select the format of the field without having to move my mouse?
View 1 Replies View RelatedForms :: Open Access In Design Mode From Within Access
Jul 23, 2014Can I for instance while my db is open, open it in design mode from my form via code?
View 3 Replies View RelatedTable Column Name Properties/Combo Box Head Properties
Dec 8, 2006Hi, I would like to change the properties of either the column heads in a combo-box or the column names for tables. I don't think there's any way to adjust the column head properties, and I'm doubtful there's a way to change the column caption properties.
Some of my column titles are long, and I'd like to be able to word wrap them essentially. Anyone know if this is possible? Thanks.
How Do You Change The "Default" Properties Of TextBox Control
Sep 22, 2006Hello, how can I change the "default" textbox properites.
When ever I place a new textbox on the form it has certain properties which I must always change.
For example I want all my textboxes to be flat not sunken and to have a solid border style. Currently the default is sunken and transparent border so I must always change it.
I know how to do it via VBA... just want to do it immediately using default.
I am assuming it's somewhere in Windows Registry?
Thanks
Design View & Control Button Errors
Oct 12, 2006Hi,
Can anyone advise why I am getting these two error messages in attached image.
I am running Access 97.
The first message refering to fDesign appears each time I have something open & click on the Design View icon.
The only way I can go into design view for a form or table etc is when I am in the tab windows for the table or form highlight it and click on Design.
The second error message refering to the refresh appears whenever I try to run a refresh command button created via the wizard.
I have the same refresh command buttons on other forms I created earlier on & have no problems with them when run. If I create a new refresh command button on same form it works. But any new forms I create I get this error.
Can anyone please advise what I am doing wrong or which settings I should look at as I have tried most settings.
http://users.tpg.com.au/roccob/fdesign.jpg
Tks
Modules & VBA :: Select Control While In Design View
Jun 14, 2013Is there VBA code to select a control on a form that is currently in design view?
View 4 Replies View Related