Any Way To Speed Up Form Picture Loading?

Jun 22, 2006

Hi all,

I've a form with an image on each page which is linked (not embedded) to filenames from another table. When moving through the forms the time it takes to import the picture is relatively slow, is there any method or hack I could use to speed this up?

The code I'm using at the moment:

Private Sub Form_Current()

Dim Picture As String

On Error GoTo PictureError

Picture = Me.Clipping_UNC & Me.Clipping_File_Name
Forms!REPORT_Coverage_Clippings![Image].Picture = Picture

PictureError:

If Err.Number = 2220 Then

Forms!REPORT_Coverage_Clippings![Image].Picture = "m:setupimage.jpg"

Else

End If

End Sub

View Replies


ADVERTISEMENT

Picture Loading Problem......

Dec 30, 2004

I have a player information form where a player picture is stored. When I first wrote the program I was able to upload a picture no problem from my computer, I had a crash and now when I try to load a picture it takes three times as long and all that shows in the picture window is the picture name. Did I lose a setting or a program during the crash? Hope this makes enough sense.

View 4 Replies View Related

Forms :: Opening A Form From Another Form Via Combo And Auto Loading Form Data?

Apr 14, 2015

I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.

The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.

The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.

View 9 Replies View Related

Form Keeps Loading/refreshing

Apr 11, 2006

Hi all,

I encountered some weird symptons with my Access forms. I am using the form to display images(done by setting the OnCurrent and After Update property).

When my PC is just powered on, and i try to load say form "ENGLISH". Form "ENGLISH" will appear, but the focus will switch in between form ENGLISH and the MS ACCESS program window. This action will onli settle down after abt 10 secs.

When the ENGLISH form is loaded, i will attempt to switch from one record to another, but the same thing occurs again. IT will load/refresh for abt 10seconds, with the focus toggling btwn ENGLISH FORM n MS Access.. IN addition, it opens a second copy of FORM "ENGLISH" in the background as can be seen on my taskbar. When i close my 1st form ENGLISH and i attempt to close the 2nd FORM tat is appearing on the taskbar, there will be an error msg, English : MSACCESS.EXE-Application Error, Instruction at....(refer to the attached jpeg file for detailed error location)

Y is it tat this weird behaviour onli applies to the forms tat are used to display images but not those normal forms tat contains of purely text?

The entire behaviour will be eliminated after i close MS access, and reload the DB abt twice.....

View 3 Replies View Related

Loading A Form From List Box

Apr 14, 2006

Hello All

I have a list box that displays the names of customers who are allowed to hire DVDs.

I would like to highlight a customer and show all the relevant customer data on a separate form, not have the list box on the same form that displays the customer's data.

Regards
Terence
London

View 2 Replies View Related

Form Not Loading Properly

Aug 8, 2006

Hi.
I am running a form on top of a query with around 1500 records in it. The query mostly uses tables that are joined with referential integrity.

The form has buttons and conditional formatting.

It was fine until today, when suddenly the form has stopped loading properly. It looks all fragmented on the screen and I have to scroll down and scroll back up again for it to look right.

I have searched everywhere to find out what is causing this and how it can be fixed, but no luck yet. Can you help?

Thanks.

View 1 Replies View Related

Forms :: Form Is Not Loading

May 21, 2013

We have access DB on a server accessed by 3 workstations. When we open the shortcut it opens a form. Few days ago we started getting this error: can't find project or library..Then this code opens in Microsoft Visual Basic

Code:
Function CheckCommandLine()
If Command <> "" Then
changeTableLinks Command
End If

[code]...

Link to the database is like this:"C:Program FilesOFFICE11MSACCESS.EXE" serverdbsci.mdb /cmd serverdbsci_data.mdb....We don't get this error on Access 2007.

View 3 Replies View Related

Forms :: Loading Form At Specified Record?

Jan 21, 2015

I have a report that summarizes the record content that is contained within a form (one report line per form record). If the user wishes to view a specific record on the form, he clicks on the report control that contains a numeric value that identifies the record on the form. I can get that to work with the following code:

Code:
DoCmd.OpenForm "AdmissionForm", acNormal, , "[Admission Number] = " & Me.Text0

where Admission Number is a control on the form and Text0 is the control on the report containing the admission number requested i.e. if the report control Text0 = 10, the form would open with the current record in which admission number = 10.

Problem is though, the form opens as "filtered" with only the one requested record (i.e. record number 1 of 1). What I would like is the unfiltered form to be opened with the requested Admission Number as the current record. I have tried DoCmd.GoToRecord but can't get it to work.

View 5 Replies View Related

Forms :: Form Loading Sequence?

May 6, 2014

I have a RTE 94 happening due to a piece of code running on a subform current-event which looks at a text box on the parent form. I understand this is due to the order of loading of the forms initially and all works fine when moving to other records once all are opened. How can I overcome this happening on first opening?

I am thinking I need to set a counter on the subform on load event to say 1, then when the subform current-event fires add some code so if the counter is 1, then do nothing, if 0 then run the code. When the mainform opens reset the counter to 0, then requery the subform. The form will now see the counter is set to 0 for the rest of the time, so will then always run the code.

Not sure how to go about setting out the code as I guess there needs to be some form of Public variable involved?

View 4 Replies View Related

Loading Textbox Value From Form Into Query Problem

Feb 19, 2008

Hi all,

I have a query that is basically loading values from a open form.

Im using the format of Product: Form!form1!products to assign the value of products to product in my query... Now all this works with straight text, however this technique does not appear to work with dates or yes no check boxes. I have used the builder but still wont work with dates. any ideas? thanks

View 1 Replies View Related

Blank Fields On Opening Or Loading Of Form

Mar 15, 2006

Hello guys

How can get blank fields on opening or loading my form?. I don't want to prevent data entry option.

Please help me

Thanks:)

View 14 Replies View Related

Forms :: Slow Loading Of Form On Internet

May 2, 2013

i searched for slow loading and found some fast internet packages on <web address removed by moderator>. By following the tips i just purchased now fast broadband but now i am facing the problem of slow loading on my local computer, is it due to any bugg with microsoft package or my system is infected by virus.

View 1 Replies View Related

Forms :: Error While Loading A Webpage With Form

Jun 7, 2014

I try to open a web page with a form in access 2007. During the loading of the page it shows me 2 security error messages.

I tried to change the properties in Activex and especially the Silent property from No to Yes but this is not possible. In the next restart of the form restores the original settings.

When i open the same page with Internet Explorer it doesn't show any error. I have attached the database example to see exactly what happening.

View 9 Replies View Related

Forms :: Clear Form Upon Loading - Only Allow Labels

Dec 12, 2013

I'm having trouble getting my form to be "blank" except for the labels upon loading. I've tried putting in some code "on load" but it doesn't clear everything. I haven't had this trouble on some of my other db's, the only difference here is it's a switchboard. I don't know if that matters.

View 1 Replies View Related

Forms :: Form Not Visually Loading Properly

Jul 10, 2015

I have a pop-up modal form which is loaded (like 99% of my other forms) by a button on another form.

Unlike all of my other forms, however, it doesn't load its background properly. If I drag the window off screen and back or shrink and resize, it does look right, so I guess maybe it requires a refresh?Obviously, I don't want to rebuild the form from scratch, so maybe some vba which refreshes the screen?

View 7 Replies View Related

Access 2007 / Form Not Loading When DB Opens?

Sep 10, 2011

A form that used to automatically open when the db was launched has been deleted. However, the instruction to load the form is still in the db. I would like to remove that instruction, but I can't seem to find where to look for that code. In Access 2007, I went on DB to the Database tool menu, but its not in the switchboard manager.

View 3 Replies View Related

Automatically Loading The Form When User Opens The Database

Apr 10, 2006

Hi,
When the user clicks on the file name, I want the form to load automatically & also at the same time minimize the database window (i.e. the window where all the tables, queries etc are listed). Any suggestions?

Thx in advance,

Jatz

View 3 Replies View Related

Forms :: Loading Only Default Form On Start Up Of Database

Mar 23, 2014

I need to load my Default Form at start up of my database while office button,the Ribbon and the Navigation pane will be hidden. And when i go to form design view then i can use the ribbon and navigation pane.

View 2 Replies View Related

Forms :: Opening DB With 2003 Form Loading Error

Sep 17, 2013

I have designed a DB in access 2010 and it opens fine on my computer. However, when others I work with (who still have 2003) try to open the database, they get the following error: "An Error Has Occured Trying to Load The Form "Form Name" - Do You Wish to Continue".

When I click Yes, it brings up all of the VBA code in the background, but when i close all of that out, it still doensn't open.I am by no means an access expert.

View 1 Replies View Related

General :: Using Recorsets - Loading Form With Information From Different Tables

Jul 8, 2014

I have tried on different forms using more than a few different methods to make recordsets happen and to no avail. My current reason for needing to use recordsets is because I am loading a form with information from different tables. Instead of using multiple DLookups, opening the recordset only looks for the information once, speeding up the load time on the form.

Code:
Dim Rs As Dao.Recordset
Set Rs = CurrentDb.OpenRecordset("PreviousTRRetrieval2Query")
If Rs.RecordCount > 0 Then
ProjectNumber = Rs!ID
Agency = Rs!WitnessAgency
FileNumber = Rs!FileNumber

That is the start of my code and I keep getting an error, 3061 Too Few Parameters. Expected 1. Now when I run the query I get the results I desire, which is all the information I need at this particular junction. I am using Access 2010. Why I may not be returning any results for my recordset when the PreviousTRRetrival2Query returns results on its own.

View 12 Replies View Related

Forms :: Auto Apply Form Filter Upon Loading

Feb 5, 2015

Private Sub Form_Load()
Forms(0).ServerFilterByForm = True
End Sub

This 2002 code is producing an error ?

View 2 Replies View Related

Forms :: Textbox Controls Not Loading When Form Opens

Aug 9, 2015

I am having a hard time with this project that I'm working on at the moment.

I have created a modal dialogue form that has a macro set to open another form and close the current form at the same time. The form that is being opened has textbox controls that have the default value set to hold the data that is in the textbox controls in the modal dialogue form that is closing. The problem is, is that when the modal closes, the controls in the next form display #Name? and the data is not copied to the next form.

View 2 Replies View Related

Forms :: 2 Level Navigation Form Auto Loading First Tab

Oct 11, 2014

I have a 2 level navigation form, which loads various subforms (obviously) - however i have an issue - i have mutiple security levels and for example when i click on 'view errors' it shows me 4 subtabs - Departments - now certain people are only able to view certain departments

However if say the depts are laid out like this - Dept 1 - Dept 2 - Dept 3 - Dept 4

Then i can on form load say if strsec = 1 then dept2.enabled=false etc - however if i want to set dept 1 enabled to false it loads it by default - is there a way around this?

View 7 Replies View Related

Form Asks For Query Criteria On Loading (listbox Problem)

Feb 1, 2006

I have a listbox that uses a query to reference a value in the current form. The problem is for some reason Access is trying to fill this listbox before even showing the form, so I get prompted to manually enter the query criteria when it should be picking it up from the form.

This is bizarre because it's only just started doing it. I've removed the listbox and created it again, but no help. I have listboxes such as this all over the place, but this particular one has just started playing up! Why?

View 6 Replies View Related

Form With No Picture

Aug 29, 2005

I have a form which brings up another form like this


Dim stDocName As String
Dim stLinkCriteria As String

stDocName = "frmImage"

stLinkCriteria = "[ProductID]=" & "'" & Me![txtProductID] & "'"
Me.Visible = False
DoCmd.OpenForm stDocName, , , , , , "SELECT ProductID, Description, Path FROM tblProducts WHERE " & stLinkCriteria & ";"

However, on the frmImage there is also an ImageControl that may or may
not have a picture. The name of the path and filename is stored in a field
in a table (not OLE).

I do not want the frmImage to open at all if no image can be found under the path and name specified. The file/picture name is exactly the same as the ProductID in the link criteria above.
Perhaps a message to say that no image was found.
At the moment the form opens up regardless.

By the way, the Me.Visible = False refers to the form that opens the
frmImage form, so will have to become True if no image found.

Thanks

View 1 Replies View Related

Picture On Tabulated Form

Jun 17, 2005

I was unable to find a satisfactory answer to this problem in the forum plz answer asap:
How can I add different pictures as background on different pages of a tabulated form such that each tab if clicked loads a new page with a different bkgrnd pic?
i m able to do this for entire forms but not each tabulated page portion
Please reply fast

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved