When I produce an append query that has field names such as 2007/08, the field name is truncated to 2007/8, which results in the query failing. SQL:
INSERT INTO [tblTemp Input] ([2007/08], [May-07]
Becomes:
INSERT INTO [tblTemp Input] ([2007/8], [May-7]
when the query is saved and re-opened.
I could rename the fields of the source table but is there an easier solution?
I am using Access 2003.
Hi everybody,
I am appending the information I have in one table to another. The first table's name is Videos and it only has 5 records. When I append the information from the other table which has some of the fields of the Videos table (but doesn't have a primary key), the new records in the Videos table have as primary key value (the autonumber field) values that start from 44699657. Why is this happening?
I have a main form which does nothing except filter subforms through a cbo.
On the main form are two subforms. One shows top line data, the other shows a breakdown of the top line data, and are linked by an unbound textbox (it's how it works, and does so perfectly)
I'm running an append query to duplicate a record in the second form using vba/sql BUT... need to have one of the fields values changed based on a field on the parent table.
If Forms!frmmain!frmPost.Form.RecordsetClone.RecordCo unt > 0 Then
strSql = "INSERT INTO [tblposts] ( TopLineID, AccountID, TransDate, Cat, SubCat, Debit, Credit ) " & _
"SELECT " & lngID & " As NewID, AccountID, TransDate, Cat, SubCat, Credit, Debit " & _
"FROM [tblposts] WHERE TopLineID = " & Me.TopLineID & ";"
DBEngine(0)(0).Execute strSql, dbFailOnError
Else
MsgBox "Main record duplicated, but there were no related records."
End If
Credit and Debits are reversed as I want one to zero out the other.
In regards to the AccountID, I've tried allsorts and it's just not working... to the point I'm almost giving up and finding an alternative.
Whats the "Correct" syntax to attach a "WHERE" statement to the highlighted [AccountID]'s (which needs to be the value on AccountID on the Parent table)
I have a tbl that gets populated from an append query and a form that is crated from this table. there is one field that gets populated from the append query called departments, the department names are long and we have abbreviated versions of the department names that I would like to use.
In the table I have two columns “department” (for long name) and “updated department” (for abbreviated department name) When I use the append query to update the department (long name) I want the abbreviated department column to populate.
For example if department column reads "Drilling and Workover" from the append query, I want updated department column to slefpopulate to read "D&WO"
I want the updated department field to automatically fill with the abbreviated name. How do I do this?
I am using an append query to move data into another database. One of the fields being imported is a date field in text form (20141201). I need it appear in the final database in text form (01/12/14) I have tried using several date conversions and cant get this work. Ideally i need the final value as a text rather than date.
View 8 Replies View Relatedis possible to run an Append Query and update a field at the sametime?
i.e. I would like the MealDate field to be incremented by 1, just not sure how to write the code within the query!!!
This is what I have so far!!! not working
MealDate: ([MealDate](Date()+1))
I want to set a table field's default value to whatever is displayed in a certain field on a certain form at the time.In other words, say I have a database with a table called TABLE1, and two fields called NAME and SCHEDULENUMBER. I have a form called CreateSchedule with a SCHEDULE NUMBERCONTROL form and a NAME form, and I can enter names onto it, and it records to the proper SCHEDULENUMBER. So if I pull up SCHEDULENUMBER 4, and add three names, when I go back into TABLE1, I can see those three new names, and each one has the SCHEDULENUMBER set to 4.
What I'm trying to do is write an APPEND QUERY to copy a list of names from a different table, and paste them into TABLE1. The problem is that the other table doesn't have a SCHEDULENUMBER field. What I want to do is put a button on the CreateSchedule form that runs an APPEND QUERY, and sets the SCHEDULENUMBER to whatever value is displayed on CreateSchedule's SCHEDULENUMBERCONTROL field.
I tried setting a default value in TABLE1's field properties for that SCHEDULENUMBERCONTROL field, but I keep getting error messages. I just want TABLE1, whenever I add a new record (regardless of how I add the record: manually typing it or clicking the append query button) to look at the form CreateSchedule, and set it's own SCHEDULENUMBER field to whatever is displayed in CreateSchedule's SCHEDULENUMBERCONTROL form.
I have two tables each with an ID field (autonumber/PK/No Dup etc).
I want to append two fields from one table to the other table. I have set up an Append Query to do this but it won't work - I get the following error - "The INSERT INTO statement contains the following unknown field: 'FiID'...."
I am giving two tables and I need to create a macro that automatically updates these tables depending on the value of a Yes/No field. If it's No, it's in the 1st table TableOne, if it's Yes it automatically updates to TableTwo.
So, the best way I saw to go about is to set up an append query and then create a macro that runs it
So my tables have the values FirstName, LastName and isValid (more but keeping it short)
So for my append query, I put TableTwo in the pop up I get. Then, where it asks for the field I put it
Field:FirstName
Table:TableOne
AppendTo:[TableTwo].[FirstName]
Criteria:[TableOne].[isValid] = 1
I do this for all (it was autocompleted except the Criteria field). I tried to keep Criteria with data only for isValid but that didn't work. I wrote it for all the field names, still didn't work. Whenever I click run it says it'll append 0 rows.
hi Guys,
I have been looking at different post and checking Microsoft help files as well, but still can't seem to fix this problem.
I am having 2 tables. The first table is connected to a form for viewing and entering data, and in the second table i am just copying 3-4 fields from the first table.
I am trying to use the insert statement to insert records in the second table, and everytime i click on the "Add" button to add the records i get the following error "MS access can't append all the records in the append query ... blah blah blah"
However if i close the form and reopen it, and goto the record (as it is saved in the first database) and now click on the add button to add the fields to the second table/database, it works.
What am i doing wrong???
Any inputs will be greatly appreciated.
Hi,
I have a field in one table that needs the sum from fields in another table.
How do I go about doing that?
Thanks,
Trena
I know this can be done, but I cannot remember how, hoping someone can save me some time:I have a field with values like this:5221231234I want to append zeros to the front of the field data using a query so the value in the field will always be five charactere long and will be padded withing eading zeros, like this:00005000220012301234Sorry for the easy question, will appreciate any help.Thanks!
View 8 Replies View RelatedI have the field called subject_id which is autonumber in the form of 10001,10002,... And I want the field with the same format to appear in another table. But appending it leads to different numbering, i.e. the filed becomes 1, 2, ... instead of 10001, 10002 as I've formatted it in its original table. How could I append/copy such a field?
View 1 Replies View RelatedI have two databases that I need to merge into one. The structure of each DB is identical, however the data is different. My original thought was to import all the tables into one DB, then use Append queries to merge the similar tables. The problem is that the main table in each DB has an Attachment field (using the Attachment data-type). After doing some research, it seems that you cannot use an Append query that references a table that contains a multivalued field (such as the Attachment data-type).
Every record has at least one attachment stored in this field, so removing the Attachment field is not possible. So my question is, if I have two identical tables, each with an Attachment field, how can I combine them into one table?
The only idea I had was to write a VBA procedure that would loop through all the records in the main table and save each attachment in a folder outside the DB, then delete the attachments. I could then merge the two tables using an Append query. Finally, I would run another VBA procedure that would load each saved file back to the appropriate record in the DB. The procedure that saves the attachments would have to write the primary key for the record they were attached to in the filename (or create a new sub-folder that is named with the primary key value), then the procedure that loads the files could read that value from the file or folder name and know which record to attach the file to.
Hello,
I have a few tables containing different exam data for students - and a unique identifier with each. I need to add another unique identifier (which is already specified from another system).
Now, can I use the existing identifier (UPN) to automatically put in the new identifier into a new field (AdNo).
If that makes any sense at all, I will be surprised...thank you!
Hi, basically what i want to do is append a record to a table using vba. I would like to take two values from my form (productID, supplierID) and insert them into a table (supplierProductsTBL) under the same headings. I've constructed an sql statement but am getting the following error:
runtime error '3346'
number of query values and destination fields are not the same'
I think this happens because the table also contains an autonumber field (supplierProductID) and i'm not referencing this in my sql statement (below):
mySQL = "INSERT INTO SupplierProductsTBL ( SupplierID, ProductID ) VALUES ('" & SupplierID & "'), ('" & ProductID & "')"
i wuld just get rid of the autonumber field but i need this.
Any help on this would be appreciated, cheers mark.
I should change the Fields(1) and Fields(2) to the actual fields names.
field 1 should be EmployeeListID
field 2 should be ItemsID
PHP Code:
Dim rs As dao.RecordsetDim db As dao.DatabaseSet db = CurrentDbSet rs = db.OpenRecordset("tblEmployeeItems",
dbOpenDynaset)rs.AddNewrs.Fields(1) = Me.[lstAvailableEmployees]rs.Fields(2) = Me.
[lstAvailableItems]rs.Updaters.Closedb.CloseSet rs = NothingSet db = Nothing
I need to save a user's machine name when they comment on a record.
I have a form that has a comments field, and a separate area that shows the historical entries from comments.
I also have an invisible field populated by "=fOSMachineName()" that shows the users machine name. Getting this running was tough on my 64 bit machine, but it now works!)
I wish to have the machine name included in the comments field every time the "Save Record and Close" button (which runs a macro) is clicked.
Right now, when someone adds comments, it shows a date and time stamp (which I still want to keep) but I want to also capture the machine name at the same time.
Hi guys- totally in the frying pan here...I can't seem to get past this initial stumbling block with Access
i've made a simple form that "should" create a primary key from the first two digits of a clients last name and last four digits of their phone number...i've tried an update query button and a refresh data button...the key field gets filled in on the form, but it will not transfer to the underlying table...I keep getting a null value error for the key....any help would be greatly appreciated...
heath
Using a database 2010. I have a monthly import from a spreadsheet to one of my tables. Sometimes it has the same previous data from prior month or months that has not changed. I don't want to keep appending this data to my table if none of the fields have changed.
Is there a way to append data to table only if fields have changed in an append query? Ex. (Name, Address, PhoneNum, Rate) If all fields are the same; don't append. If one or more fields are changed; append.
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
I have designed a database that has two forms as inputs to a table. The first form is a checklist and when it is completed it saves all fields except the ManagerID field. I then use the blank ManagerID, clientID and Date to pull onto a form for the manager to complete. On completion I want the ManagerID to save into the current records so they do not show up in the manager checklist forms and I then have a complete record. I have been searching online and cant seem to see how the best avenue is. I have an append query, see below
Code:
INSERT INTO ChecklistResults ( ManagerID )
SELECT ChecklistResults.ManagerID, ChecklistResults.ClientID, ChecklistResults.DateCompleted
FROM ChecklistResults
WHERE (((ChecklistResults.ClientID)=[Forms]![TeamLeader]![ComClientNotFin]) AND ((ChecklistResults.DateCompleted)=[Forms]![TeamLeader]![ComDateSelect]));
Code:
Private Sub CmdAppend_Click()
Dim dbsNorthwind As dao.Database
Dim rstAmend As dao.Recordset
Dim qdfAmend As dao.QueryDef
[code]...
Ok, this is what I want to do :
I want to 'append' individual records from 2 tables and place in an archive table or within another database, whichever is the best option.
I then want to be able to 'delete' the relevant records from one table.
The tables are tproperty and trents. This property paid rents but has since been sold. Therefore it no longer belongs in the database, however client wishes to keep details of the property/person/and rents paid in past, for any future ref. These tables are linked in relationships to tlessee and tbilling.
I've read books/notes/looked on here for inspiration and the right direction! If I choose 'append' which seems pretty straight forward then a 'delete' query, how do I choose only one record? Is a make-table onto a different database a better option? It would appear that the whole table is copied over? Can't understand the issue about auto-numbers being copied over? Do I have to use an append/delete query for each individual property that's ever removed?
I'm at a loss! :) Thanks
I have a database that contain foreclosure records. I'd like to create a query that will ask for a date and all records that are LESS than the date will be moved to a different table.
I'd also created an icon on my form and I'd like to attach this query to it.
Any help will be appreciated.
Bruce
Please how can i use a procedure to create a query, then append the content of the query to a table (am using MS Access Project)? i did it in Microsoft acess database but now i need it on Microsoft access Project beacuase am transfering to SQL server.
Thanks
hello,
i have 3 tables:
ACAD_U:
ID
PROIZ_A
TIP_A
DN_A
KOS_A
IN_U:
ID
PROIZ_I
TIP_I
DN_I
KOS_I
ZALGA:
ID
PROIZ_Z
TIP_Z
DN_Z
KOS_A
KOS_I
KOS_Z
Now i want to create an append query that will add in table ZALGA fealds PROIZ_I, TIP_I, DN_I, KOS_A, KOS_I by critera if TIP_A = TIP_I AND DN_A = DN_I then calculate KOS_Z = KOS_I - KOS_A?
Can someone pls tell me how to do that?
THX