Apply Date Parameter To A Report
Sep 9, 2011How do i can apply date parameter to a report which takes starting and ending dates from a form...
View Replies
ADVERTISEMENT
Date Parameter In Report
Mar 29, 2007Is there any way to avoid the error code when using the date parameters in Report header when there is no data for the specified range.
The following are the parameters being used to get the date range. They work fine as long as there are records in the date range entered.
=Reports![Toys and Adapted Equipment Centre Signed Out By Date Range]![Enter Start Date]
=[Reports]![Toys and Adapted Equipment Centre Signed Out By Date Range]![Enter Final Date]
Parameter (Date) Query To Get Input Dates On Report?
Apr 28, 2006I have a report that has an underlying query that asks for Start Date and End Date.
Is there anyway that I can get what the user inputs into the box to be put into the Page header of the report?
ie: user enters into the parameters
[Start Date] 01/01/2006
[End Date] 04/04/2006
Then when the report displays it says
Report for the period 01/01/2006 to 04/04/2006
Thank you for your time
How To Apply The Same Filter Used By A Form To A Report
Mar 12, 2005Hi!
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
Thanks.
Apply Changes From Date Changed
Jun 12, 2014I have a database that contains a table with all tasks made in our team and the time it takes to perform the task. I have another table with month, year and value in which I put month after month the volumes that each task handles. So, in a query I multiply the time to perform the task and the volume; month after month I have different results. However "the time to perform the task" may vary depending on processes improvements that we made. If before I had 5 minutes to perform the task and now I have 2, I change it and then the results on the query are changed for all months. I do not know if there is a way to specify that that change must be applied from the month where it is updated to the following months and not retroactively.
View 3 Replies View RelatedUsing Checkbox To Apply Date To All Records
Dec 8, 2005Dear All:
I have a form with names, address, work completed on a certain date. etc. I have a bound textbox called "DATE" and a bound checkbox called "APPLY_DATE_TO_ALL". I wish to enter a date in a textbox called "DATE" then place a check in a checkbox called "APPLY_DATE_TO_ALL" and it applies this date to ALL records.
Any ideas on how to start?
Thanking in advance,
Dion
Apply Filter From Subform To Form By DATE
Sep 21, 2005Hello everyone.
I am having trouble with applying filter on 2 date fields in form. I have succeeded by applying fiter on report by Date, but I just can't seem to work it out on Form!
I believe there has to be something to do with the DoCmd code.
I have a main form (frmRate) which has fields (txtDate & txtValidity) that contain dates.
I have a subform called (frmSearchRateCustomer) which has 4 fields (txtStartDate, txtEndDate, txtStartDate2, txtEndDate2) where the data range should be filled in as search criteria. I have also an additional combobox (cboCustomer) where user can select customer as a search criteria as well.
I have a button that has to do the Search in frmRate.
The combobox criteria works very well, just the date filtering is not working. I am pasting my code as follows:
Code:Private Sub cmdSearch_Click()On Error GoTo Err_cmdSearch_ClickDim strCustomer As StringDim strFilter As StringDim stDocName As StringDim strForm As StringDim strField As String 'Name of your Order field.Dim strWhere As String 'Where condition for OpenReport.Const conDateFormat = "#dd/mm/yyyy#"Dim strField2 As String 'Name of your Arrival field.Dim strWhere2 As String 'Where condition for OpenReport.Const conDateFormat2 = "#dd/mm/yyyy#" strForm = "frmRate" strField = "txtDate" strField2 = "txtValidity" ' For the Order Date Search Criteria Date range If IsNull(Me.txtStartDate) Then If Not IsNull(Me.txtEndDate) Then 'End date, but no start. strWhere = strField & " < " & Format(Me.txtEndDate, conDateFormat) End If Else If IsNull(Me.txtEndDate) Then 'Start date, but no End. strWhere = strField & " > " & Format(Me.txtStartDate, conDateFormat) Else 'Both start and end dates. strWhere = strField & " Between " & Format(Me.txtStartDate, conDateFormat) & " And " & Format(Me.txtEndDate, conDateFormat) End If End If ' Debug.Print strWhere 'For debugging purposes only. ' For the Arrival Date Search Criteria Date rangeIf IsNull(Me.txtStartDate2) Then If Not IsNull(Me.txtEndDate2) Then 'End date, but no start. strWhere2 = strField2 & " < " & Format(Me.txtEndDate2, conDateFormat2) End If Else If IsNull(Me.txtEndDate2) Then 'Start date, but no End. strWhere2 = strField2 & " > " & Format(Me.txtStartDate2, conDateFormat2) Else 'Both start and end dates. strWhere2 = strField2 & " Between " & Format(Me.txtStartDate2, conDateFormat2) & " And " & Format(Me.txtEndDate2, conDateFormat2) End If End If If IsNull(Me.cboCustomer.Value) Then strCustomer = "Like '*'" Else strCustomer = "='" & Me.cboCustomer.Value & "'" End If ' Build filter string strFilter = "[txtCustomerName] " & strCustomer DoCmd.OpenForm strForm, acNormal, , strWhere ' for date DoCmd.OpenForm strForm, acNormal, , strWhere2 ' for date stDocName = "frmRate" DoCmd.OpenForm stDocName, acNormal ' Apply filter to report With Forms![frmRate] .Filter = strFilter .FilterOn = True End WithExit_cmdSearch_Click: Exit SubErr_cmdSearch_Click: MsgBox Err.Description Resume Exit_cmdSearch_Click End Sub
I have used the same code as I have used for my Report, just changed few things like rpt --> frm etc...
Please Help me, because I am STUCK! Thank u~~
Reports :: Apply Conditional Formatting For Dates That Were Equal To Date And Plus 14 Days
Apr 27, 2015I have a field that displays a date on a form.
I set the conditional formatting to be
Value is Between Date() and Date() + 14
It would only apply the formatting for dates that were equal to the date and +5 days.
I then tried Between Now() and Now() + 14
Same results
I then tried Between Date() and DateAdd("d",14,Date())
No change
I checked the property for the box and the back style is normal.
I am making the back color a light red. I tried to change the fore color red. Nothing.
I displayed what Date() was giving me in a text box control and I displayed what Date() + 14 was giving me in a text box control. They both were showing the correct dates, but my date, which was in between them, was not changing colors.
Reports :: Can Create A Date Parameter Box Open Up / When Open Report
Sep 21, 2014I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.
Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.
Report Requests Parameter Value
Aug 4, 2006Hello ... by problem:
Explanation:
Table has a single field (AllocAmt) that is repeated for each detail transaction. Therefore I can't put the sum of the single field on the report because it adds that sum times the count of the detail.
The solution I attempted was to create a subreport using a summarized query then divided the summarized AllocAmt by the count of the same field and got what I wanted. It worked beautifully. I named the calculated field and then created a sum of the new field (SumAllocAmt) in the subreport report footer. I ran the subreport and my totals came out fine.
Then I added the subreport to the original report and the information for each grouping came out fine.
Now my problem ... when I call the field ('=srptAllocAmt.Report!TotalSumAllocAmt") I created in the subreport report footer it does not give me the total for all groups in the original report. In fact it gives me the last record amount instead of a total. When I enter the expression "=Sum([sprtAllocAmt].[Report]![TotalSumAllocAmt])" and try to run the report a box pops up requesting a "Parameter Value" for the field sprtAllocAmt.Report!TotalSumAllocAmt. Why doesn't it recognize that I want a sum of the field contained in the subreport? I've gone to the properties box in all the subreport fields and made the data available "overall". I don't know what else to try. Any suggestions?
Show Parameter In Report
Aug 16, 2007Is there a way I can display my parameter in my report? I have a report that's generated from a parameter query. In a control I want to show what the parameter values are: Between [start date] and [end date]
View 2 Replies View RelatedReports :: Between Parameter On Report?
Jun 5, 2013I have a report based on a query with a between two dates parameter (Begin date and end date). This parameter is fed from a form. All works well - query, form and report. My question is can the date parameter appear on the report header so users know the report was based on a start date of 1/1/2008 and an end date of 1//2009 for example?
View 4 Replies View RelatedInsert Parameter Dates In A Report
Jun 14, 2005Hey folks,
sorry if this is an oldy but.........!!!!!!!!!
I need to insert the parameter dates for a query into a report. I have tried all the methods I can find but none seem to work. I think its to do with the way my queries are structured.
I have a basic query (q1)! Based on this is a grouping query (q2)! Based on this grouping query is my report. I have set up a form prompting for the parameter dates. This all works ok and my report displays the correct data (between the dates entered). The problem is that I cannot get the report to show the parameter dates.
Help. Its driving me nuts.
Billsack
Capturing Input To A Parameter To Use In Report
Jul 29, 2006I have a report which asks for the beginning date and ending date which they want. The report is generated using this information. I want to put the information entered in the parameter request into the heading of the report. How do I recover this information to put it in.
Jerry Hughes
Queries :: Report Value As Parameter In Query
Oct 24, 2013can i set a value in report as parameter in query
View 1 Replies View RelatedReports :: Save Report With Name From Parameter Value?
Mar 28, 2014Background: Access 2003
I have a database with which I use to generate reports as pdfs to load to a website.
However when I go to save the file as a pdf it is always as the report name.I am trying to automate this by using a macro as I need to run a report 50 times for ships with a different parameter each time (name of the ship) Another report needs to be run about 30 times, this time the parameter being a date And finally two other reports, but I can live with those being the name of the reports.
Firstly can this be done?
Secondly which would be the best way?
I've tried using the macro route by I run my Report "Main_Ship" with a where clause of [ship]="wiltshire". This produces the report with the relevant ship, but I am then unsure what to use next to save it as a pdf with the name "wiltshire" using the macro route.
or
Create a VBA routine that runs the report as many times as required each with a different parameter for the name of ship or date.?
[URL]
Automatically Return Parameter Query As A Report
Mar 14, 2006I created a combo box that runs a parameter query based on the name entered in the box.
Is there some way to return the results as a report instead of in datasheet view?
I'm wondering if inserting some sort of code into the event procedure of the "OK" button (which launches the query) would work.
Would greatly appreciate help---
Send Textbox/es Info To Parameter For Report
Nov 9, 2006Ok I saw this posted up in the forum but it was not explained.
I have a Query which asks for a parameter before giving an output.
I have a report that uses this query to display the information.
Ok what I am trying to do is create a form that has a textbox and I enter the parameter's information in that textbox or textbox. How do I send the information to the query?
The reason for such a thing is people tend to not follow the set guidelines for putting stuff in a parameter box. So what I decided to do was set up a calendar form which a person has to physically choose the date from the calendar and this leaves no room for real error. My problem is I can get the calendar information to the textbox or textboxes but can't figure out how to code the button to send the textbox information to the query & parameters & report, etc...
Can someone please help me out of this situation? or point me to a starting point?
Modules & VBA :: Adding Another Parameter To Code For Report?
Dec 5, 2013I am trying to add another parameter to a report to only get those specific records. I did not write the code and am very confused on how it works. Right now it is getting records in the Access database between the 2 dates entered. But NOW I need to add a parameter to select only records between those dates AND with the AccountNumber LIKE acctltr (this is the field from the form). They can either put in an "X" or an "P X". The AccountNumber needs to end in which ever one they enter.
Here is the code that is currently existing and supposedly works. At least it gets all the records between the dates even tho it still prints records with a ZERO balance.
Code:
Private Sub cmdprint_Click()
On Error GoTo exit_cmdprint
'mysql = "SELECT * from InvoiceTable " & _
' " WHERE ((not InvoiceTable.InvoicePrintDate1 Is Null) AND (not InvoiceTable.InvoicePrintDate2 Is Null) AND (InvoiceTable.InvoicePrintDate3 Is Null) AND (InvoiceTable.InvoiceDate Between #" & dtefrom & "# And #" & dteto & "#))"
'Me.RecordSource = mysql
[code]...
Reports :: Opening Report Via Parameter - Enter Your Box ID
Mar 11, 2015So I have a report that opens via Parameter. The SQL behind the query that runs the report is (I took out alot of lines that aren't necessary to answer the question)
PARAMETERS [Enter Your Box Id] Short;
SELECT DocumentsTable.OrganizationalID,
.
.
.
DocumentsTable.Status
FROM DepartmentsTable INNER JOIN (Year1 INNER JOIN DocumentsTable ON Year1.ID = DocumentsTable.RecordDateYearID) ON DepartmentsTable.ID = DocumentsTable.DepartmentID
WHERE (((DocumentsTable.Voided)<>'Y' Or (DocumentsTable.Voided) Is Null) AND ((DocumentsTable.ID)=[Enter Your Box ID]));
So if I click on the report, I get a little popup that says "Enter Your Box ID", and when I do, the report works just as expected.
However, I also want to be able to open this report via link from another report, and pass the Box ID #. I just can't get the syntax right. I would have thought it was this:
Private Sub ID_Click()
DoCmd.OpenReport "Find A Box", acViewReport, , "[Enter Your Box Id]=" & Me.ID
End Sub
However when that execute, I still get the pop up asking for "Enter Your Box ID"
Reports :: Pass Parameter To Report On Load
Apr 16, 2014I have a report that pulls data from a crosstab query. The report works perfectly and prompts for a "StartDate" when it is run.I need a form with a date field that can be selected. Then a command button which when pressed opens the report with the selected date passed as the parameter.the code I have so far is in the on click event of the button:
DoCmd.OpenReport "rpt_12MonthlyInvoices", acViewPreview, , "StartDate=" & Me.txtStartDate
I was hoping that this would pass the txt.startDate field on the form to the report's "StartDate" when it is opened, but it is still prompting for the parameter when the report loads.Should I be using openArgs rather than the where clause? Or do I need to configure something in the "on load" event of the report also?
Queries :: How To Show Whole Parameter Field On A Report
Apr 25, 2014I have parameters set in a query. This query generates a report. I want to have the parameter field the user enters show in the report. Example: I have Region set up as a parameter. The criteria in the query is Like "*" & [Region] & "*" The problem I'm having is in the report it only returns what the user enters in the parameter prompt.
For Example: If I type south it only shows south rather than south east or south central (which is the whole field), etc. on the report. It shows in the table generated by the query but not on the report. If I leave the parameter prompt blank it brings back all the records like it should but again leaves the "region" field on the report blank.
Queries :: Use Value From Parameter Query In Report Header
Jul 12, 2014I have a query that I use to populate a report.
The query has a parameter box that opens and asks the user to enter a date.
I would like to display this date in the Report heading.
Is there any way that I can grab the value entered into the parameter query and display it on my report heading?
Display Value Of Parameter Query In Report Title
Nov 21, 2011I would like to display the value of my parameter query into the title of the report.How could I do this on Access 2007?So far I have made another field in the query and called it ParaDate: [JobDate]
Then in the report title I wrote:
=Limousines booked for&" "&[JobDate]
But it's not working.
Query / Report Parameter Prompt Functionality
Jan 4, 2013I have a couple of questions which are sort of related. They both revolve around Parameters with a Query/Report.
Here is a bit of background. The source Table is formatted in a way similar to this:
Code--Account#--Expense Description--Jan--Feb...
When running the Query, and associated Report, the user is prompted to input an Account# via a Parameter that I set up. The dialog box pops up with the word "Account#" and a box for the user to enter by what account that they want to restrict the Report. [Question 1] - Is there a way to make this dialog box contain a drop-down box with a list of predetermined accounts instead of the aforementioned entering of an account number? If not via this dialog box, is there another way?
Also, multiple accounts roll up into a single P&L line item. For example, let's say that accounts 1234 and 5678 both make up "Equipment". [Question 2] - Is there a way to run the Report in such a way to return all accounts which roll into a line item? I want to have the ability to run by either an individual account or the P&L line in total.
Date Parameter Queries
Jan 9, 2006Hi everybody,
I have a report that is based on an underlying query.At the query level,I
want to define parameters of date data type so that records to be displayed
should fall between DateA and DateB. ie Between[Enter Date A:] And [Enter Date B:].
I want the DAteA and DateB to be only days and Months of a year.
Say my DateA = 01 Jan 06 and my DateB = 31 Dec. 06
But I want only the Parameter to be Between[Enter day and Month A:] And [Enter day and Month B:].
How can I write a query with the two parameter values?
Thank you
dfuas