Auto Insert Field Info Based Upon Combo Box

Mar 15, 2005

Someone once posted an database on how to do this but I was not able to see how they were able to automatically input the data into a text field.

I know how to do a combo box to query and input those results into a combo box but I am confused how they got the information from the combo box selection to automatically put the other variables into the testbox. They did this without using the dlookup command. In fact it was done without any code.

They showed how to do this automatically without code and with two other methods (one being dlookup). Can someone please help me if it is clearcut as I don't have too much time to search the forums for empty answers (believe me I have already wasted too much time) Thank You

View Replies


ADVERTISEMENT

Forms :: Auto Populate Date In Field Based On Selection In Combo Box

Mar 11, 2015

I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.

View 8 Replies View Related

General :: Auto Fill All Requirement Check Boxes Based On What Is Stored In Client Info Table

Jul 1, 2013

I have a table called Client Info which stores the clients name and their requirements (Gas safe etc). And I have a table "Job List" where i select from a drop down menu the clients and it auto fills all the requirement check boxes based on what is stored in the Client Info table. However I can't get the code to work.

Private Sub Client_Click()
[job_list].[Gas_Safe].Value = [client_info].[Gas_Safe].Value
End Sub

View 7 Replies View Related

More Info Button Based On Combo Box Selection

May 21, 2012

More Info" button based on Combo Box selection. I need to create a command button that can be used to see all of the data in the table for whatever name is selected in a combo box. For example, if John Smith is selected from the combo box, the user could click a "More Info" button, which will open a separate form showing all the data in the table for John Smith.

View 1 Replies View Related

Auto Populate Text Field With Info

Feb 15, 2015

I have a text field that I would like to have some information automatically populated when the form is open. I know the basics but the trouble I am having is having the date and time populated before the default text.

Here is what I tried but no luck on it

Code:
Private Sub Form_Load()
Dim strQuery As String
'Dim js As Integer
Dim currDateTime As Date
currDateTime = Now()
Me.Description = " & currDateTime & " & " " & "J.Adams 41066 CLT SMB - AM : " & " " & ""
End Sub

View 4 Replies View Related

Queries :: How Can Query Display Info Based On Cascading Combo Boxes When Box (isnull)

Nov 27, 2013

I have a form with cascading combo boxes pulling from a table. They work perfectly, no worries. My problem now is if I do not enter information in every combo box (i.e. only two out of four combo boxes), how can I still run the query and get the appropriate information?

For example (these are my combo box titles in order):

Product
Type
Customer
Contract #

I don't want to necessarily look by Contract # all the time, but sometimes just by the general Product and Type to get a larger view. How do I set up expressions/criteria in my query to accurately produce that information? Right now it just produces a blank query table if I don't fill out all the boxes.

I've tried a couple of expressions with "isnull" criteria, but I must be doing it incorrectly.

View 2 Replies View Related

Auto Insert Value To Field When Form Opens

Sep 28, 2006

how can i insert 'thisvalue' into 'thisfield' as soon as the form is opened??

View 5 Replies View Related

General :: Auto Insert Date When Another Field Is Changed

Feb 25, 2015

On my form have a status field with about 7 options to choose from a combo box, i have these values set in another table. What i would like is for my other field, which is a date, to automatically change whenever the status field is changed. So i know how long ago the status field was set. So basically if i change the status to complete i want the date to then set the date and time now.

View 5 Replies View Related

Update Order Info Based On Quote Info

Nov 7, 2006

I need help on this, from what the best concept is, to what I need to look into using:

I store Quote data from phone calls into tblQuotes. There is a seperate table that holds much of the same information except that it is for actual orders called tblOrders.

As far as function goes, I have each working much the way I need it to except for one thing... If a sales person is on the phone with a customer with a quote already in the system, right now they re-enter the data into the Order table. Most times, the order is what was quoted, but maybe with a few small changes (so I will wnt to keep a historical record of the quote). How could I copy the contents of the quote recordset into the recordset for an order, where all the sales rep does from there is edit the quote to the actual order?

Would I use VBA or an update query that is executed via VAB? Honestly, I am unsure how to do this at all, I hope someone has seen this before and has a good suggestion...

Thank you.

View 2 Replies View Related

Forms :: Auto Pop / Fill Based On Combo Box In A Form

Oct 22, 2014

I have created a form based off of one table. I have added an unbound combo box so a user can select a department's number and would like department name and accountable officer to auto pop/fill based on the dept number selection. I'm not sure what I need to put in the "After Update" in the properties in order for this to work.

View 5 Replies View Related

Forms :: Auto-fill Data Based On Combo Box?

Nov 20, 2013

I have a combo box that autofills a text box, this has duplicate values and I want to fill the text box based on the selection of the combo box.

Let me explain:The combobox is Suburb, the text box is for Postcode, the data has multiple matches for example FRANKLIN has a postcode match of 2913 in ACT and also 7113 in TAS.

From the combo box I select the record that matches 7113 but 2913 enters into the text box.

This is my code: In Row source of the combo box I have - SELECT [Australian Postcodes].Locality, [Australian Postcodes].Pcode, [Australian Postcodes].State FROM [Australian Postcodes];

In Event on change I have -

Private Sub Suburb_Change()
Me.Postcode = Me.Suburb.Column(1)
End Sub

how to change this to be based on the selected record from the combo box?

View 2 Replies View Related

Auto Populate Fields Based On Combo Box Selection

Jan 23, 2013

I have three tables with the following columns:

MoldReq
Mold_NoPart_NamePart_NoMaterialDateWork_Ord(Pri Key)
MoldLog
Log_IDMold_No(Pri Key)Part_NameLog_DateTime_InTime_OutHours
Molds
Mold_No(Pri Key)Part_NamePart_No

I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.

I have tried following this video where I create a change event:

Code:
Private Sub cboCombo31_Change()
Me.txtPart_Name.Value = Me.cboMold_No.Column(3)
Me.txtPart_No.Value = Me.cboMold_No.Column(4)
End Sub

View 14 Replies View Related

General :: Auto Populate A Text Box Based On Selection Of Combo Box

Jul 24, 2014

I am trying to populate multiple text boxes from combo box using one table. First text box is getting populate on base of combo box value while 2nd text box is not getting populating.

I have used the following to populate the text boxes, even row count is correct, But why is not 2nd text box is not populating ?

=[Combo2].[Column](1)
=[Combo2].[Column](2)

One thing I noted when I provide the control source then selection gets stop from combo box...I am giving the valid control source is customerID but its not working.Could it be the reason ? Why selection gets stop from combo box when provide the control source ? If remove the control source then 1st text box is getting filled on basis of combo selection and 2nd text box value is not getting filled as describe above.

View 1 Replies View Related

Forms :: Auto Populate Text Boxes Based On Value From Combo Box

May 16, 2013

I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses

The following fields exist in both tblAddresses and tblPO
Company
Address1
Address2
City
ZP
State

The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.

My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.

View 1 Replies View Related

Forms :: Auto Populate A Text Box Based On Selection Of A Combo Box

May 24, 2013

I have two tables: tblWeightTickets and tblWasteType.

I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.

There are two fields in particular that I am working on ... "WasteType" and "Rate".

On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).

The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.

View 11 Replies View Related

Auto Populating List Box Based On Two Dependent Combo Boxes?

Mar 31, 2014

how to auto populate list box based on two dependent combo boxes.

View 9 Replies View Related

Tables :: Auto Populate Field Based On Answer Of Another Field In Same Table

Feb 28, 2013

Within my table if Field 1 has an answer of Self (from drop down), then, I would like Fields 6-12 to auto populate; however, if Field 1 does not have an answer of Self, then leave Fields 6-12 blank.

I am not quite sure how to lay this out. I am using Access 2010.

View 8 Replies View Related

Make Field Auto Populate Based On Value Of Field In Another Table

Mar 4, 2008

I'm creating a database that keeps a track of questions and scores.

The questions in the database need to be dynamic and are changed frequently.

I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.

I want the question field in my scorecard table to populate with the value in my question table.

I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:

SELECT tblQ1.Q1
FROM tblQ1;

This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?

View 1 Replies View Related

Tables :: Auto Populating A Field Based On Selection Of Other Field

Jun 27, 2014

I (will have) a form which a user fills in to enter new data.

I have two fields,

"Branch" and "Branch ID" (Branch ID will not be on the form, just in the table)

Branch will be fed by a combo box with seven choices. I would like it so that when "Branch" is populated it autopopulates Branch ID with a code which relates to the branch, so for example

BRANCH BRANCH ID
Braintree BRA
Colchester COL

View 4 Replies View Related

Auto-filling A Field Based On Entry In A Separate Field

Jul 17, 2015

I am creating a database tracking physicians and their contracts. I currently have two tables: PhysicianT and ContractsT, with corresponding forms to enter information in them. I have an issue with the Contracts form; I want to be able to select a physician from a dropdown list (looked up from PhysicianT) and have Access autofill their Physician ID #.

PhysiciansT looks like this:

physicianID (AutoNum) name (Calculated)
1 Barker, Bob
2 Burgundy, Ron
3 Stark, Tony

Upon selecting Barker, Bob from my dropdown list, I want "1" to appear in the Physician ID # field in my Contracts form.

View 3 Replies View Related

Modules & VBA :: Insert CR / LF In Memo Field Based On Search String

Jan 16, 2014

I import a CSV field which has not preserved the CR/LF when it was exported from BCM Remedy. There is no setting for that. The memo field prints on my report like this:

A custom solution would be developed, that once implemented, could become the standard product in similar situation. Normally would assign to Network Engineering, but will work with Ray and the IPT Team to cost out the solution and get approval to proceed. 2012/05/24 10:44:28 AM PCOLLINS Sent to Ray Massie for review to determine if a solution needs to be proposed, or if they can wait for the National IPT solution to be ready in 2013.

I want to add VBA code that inserts a CR/LF in the memo field before all but the first occurance of a string that looks like a date, the first occurance doesn't need it. I will do it right after I import the CSV file into the table, so it happens only once, and it always prints and displays the CR/LF.

The memo field is called "NBS Update" and the table is called "CCRR Remedy Data"Here is what I have, but don't actually know what to put in to find the date and add a CR/LF:

Code:
Dim db As DAO.Database

Code:
Dim db As DAO.Recordset
Dim srtSQL As String

[code]...

View 14 Replies View Related

Using A Combo Box To Insert Text Into A Form Field

Oct 9, 2005

This is really hard to explain, but basically I'm trying to use a combo box that has a control source different than it's record source to update another field on the record source. For example, the combo box pulls it's options from a table called "NameList" and when you select an option from the combo box it updates a table called "Results". On this form there are form fields that are bound to the "Results" table. What I want to happen is, when I make a certain selection from the combo box, I want one of the fields bound to "Results" to automatically display text from a different table. Is this even possible? If this is a horrible explanation, please let me know. I need serious help on this one, I've been working on this for a day and a half now. If anyone has any ideas on how to do it a different way, please make suggestions. Thanks in advance!

- Josh :confused:


Also, another thing I forgot to mention, this may help anyone who tries to help me. This "Results" form is basically used as a log utilizing a report to display a sequence of events. I've included a screenshot for visual affect. I have censored a few things for privacy reasons.

View 2 Replies View Related

Auto Update Of 1 Field Based On Another.

Jul 6, 2006

i have set up a database to help track the vehicles my company owns. However on the form i have created when i type in the license plate number want the work area that is responsible for the vehicle to pop up so i can inspect it.the form also has the different things i would look at but i don't want to continue to change the work area that has the possession of the vehicle or have to look it up every time i have an inspection come due. Any help would be appreciated

View 1 Replies View Related

Auto Data In One Field Based On Other Fields?

Feb 27, 2008

Hi,

I have a table that is used for project progress. One of the fields is named "Completed". I would like to know if it's possible to auto fill the data in the "completed" field based on three other fields within the same table.

ex: If field 1 = Yes, and field 2 = Yes, and filed 3 = Yes, then field "completed" = Yes

I'm open for any ideas, I'm new to access and am not sure how to get this started.

Thanks

View 3 Replies View Related

Auto-filling Fields Based On Another Field

Dec 7, 2004

hi all...

i am the biggest of all newbies when it comes to access and understand only the graphical parts of the process (no SQL knowledge etc.).

how would i go about auto filling a certain field based on what's in another field? for example, i have a field called TimeZone that i want filled with either West, East, Central, or Mountain based on another field for State. can i build a query to automatically take care of any empty fields for TimeZone that haven't already been filled out by me manually?

if i need to use SQL, that's fine too as long as the directions are clear and precise as i have no prior knowledge.

thanks a bunch.

View 4 Replies View Related

Auto Increment Field Based On Value Between Two Numbers

Apr 25, 2013

I have inherited an Access DB that is supposed to be kept "alive" but not made much better. On a weekly basis I get an Excel CSV that I'm supposed to import into one massive table; that works just fine.

However, there is another query that takes values from a table named "New Users From Import Table" and appends them to the current "User" table.

But before running that query I have to manually update a field called "Display Name ID" with the next highest number from the User table but only the highest value that isn't in the 9000 number range.

For example, my next highest "Display Name ID" is 1144, which of course does not include the records that range between 9000 - 9008.

I had to manually enter 89 "Display Name ID" values yesterday and I know there has to be a way to update that field when I pull the data over from the temp table without having to do it all manually.

Here's the query that pulls the data into the "User" table (after I've manually entered the incremented values).

INSERT INTO Users ( [Display Name ID], [User Type], Organization, [Display Name], [Alias Name] )
SELECT [New Users From Import Table].[Display Name ID], [New Users From Import Table].[User Type], [New Users From Import Table].Organization, [New Users From Import Table].[Display Name], [New Users From Import Table].[Alias Name]
FROM [New Users From Import Table];

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved