Auto Number Using A Field And Letters
Aug 25, 2014
The big issue is wanting to create the following records in a subform every time a new record in the subform is added. I can populate the Ticket field and know how to cast fields as strings to append them (so I can get the Cylinder field). The output is used to populate a table called Cylinders. My question is:
How do I create a field of letters (or numbers) corresponding to the row in the subform without continuing from the previous letter (or number) in the Cylinders table?
Ticket
Letter
Cylinder
1589
A
1589A
1589
B
1589B
1600
C
1600C
1600
D
1600D
1600
E
1600E
View Replies
ADVERTISEMENT
Sep 9, 2011
how to write out the query Im trying to create so I'll create an example:
Field: Drivers Names
I want to know how to create a query that will calculate the # of drivers names which starts with, A, B, C etc.
I want my query to be:
Drivers names first letter # of first letters
A 10
B 19
C 15
how I can create such a query
View 10 Replies
View Related
Jun 2, 2014
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate()
If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then
Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1)
DoCmd.RunCommand acCmdSaveRecord
End If
End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?
View 5 Replies
View Related
Oct 26, 2005
Here is my issue. In a table with an Auto Number index some records have been deleted. I have been able to recreate them along with their original auto number. The problem is that I do not know how to append these records forcing the original auto number. I have tried changing the auto number field to a number field in the table, this works except I cannot change it back to auto number.
I am sure I’m not the first with this question or issue. I did search through a couple hundred entries about auto number before I posted this question.
Jim
View 7 Replies
View Related
Mar 12, 2015
I would like to run a query which takes a code which contains a mixture of number and letter and returns all the number before the first letter. I was using the left function (=Left(([Codes],2)) but sometimes there is one number sometime two. The desired results are shown below;
7pol2try36 = 7
12cet9fre55 = 12
10yea3gtr77 = 10
Is this possible?
View 3 Replies
View Related
Jan 25, 2006
Hi guys,
Just a quick one ( I think )
I have a table which already has an autonumber ( the id field )
But I need to create another field also with an auto generated number which will generate reference number which i need to start at a pre-defined number.
The problem is, im not allowed to use 2 auto number fields, and access is prompting me to use a number field instead.
The question is, is there a way around this ?
Can i create another field which works the same way as an auto number and increments the number by 1 for each new record entered ?
Many thanks in advance for any help.
Max
[edit: spelling mistakes]
View 2 Replies
View Related
Oct 15, 2007
I have an order table [OrderMain], which contains [OrderNumber] "Auto Number" along with various customer related only info
Then i have a order line table [OrderLines] which contains the items ordered. Which looks like
OrderNumber
OrderLine
PartNumber
These tables are in a form, relationship of [OrderNumber]
This structure enables me to order as many parts as i'd like against 1 order number.
What i would like to do is set something similar to a auto number in the OrderLines table. This would be in the Lines Field.
The problem is, AutoNumber can't be used in the [Lines] field as each new order line # would continue from the last #.
The result would look like:
View 3 Replies
View Related
Mar 13, 2008
I have a primary key field called "Issue Number", with the properties set to auto-number.
After testing, I need to set it back to zero before going live.
I deleted all the records and did a compact and repair, but the first number that comes up is the one after the last one used during testing.
Help????
Thanks
View 14 Replies
View Related
Jan 5, 2006
Hi, basically what i want to do is append a record to a table using vba. I would like to take two values from my form (productID, supplierID) and insert them into a table (supplierProductsTBL) under the same headings. I've constructed an sql statement but am getting the following error:
runtime error '3346'
number of query values and destination fields are not the same'
I think this happens because the table also contains an autonumber field (supplierProductID) and i'm not referencing this in my sql statement (below):
mySQL = "INSERT INTO SupplierProductsTBL ( SupplierID, ProductID ) VALUES ('" & SupplierID & "'), ('" & ProductID & "')"
i wuld just get rid of the autonumber field but i need this.
Any help on this would be appreciated, cheers mark.
View 6 Replies
View Related
Nov 22, 2014
I don't know why is it so complicated to add an auto number field in a query. I would like to add a increment number (auto number) on each line and then an auto number on each product.
View 7 Replies
View Related
Apr 10, 2014
I have a table which will be completely emptied and refilled. The table has a field autonumbered it is also the primary key. When the table is refilled I want this field to start from 1. How can I do that. Yes some people will say this subject has been discussed search for it. But here the issue is somewhat different we have an existing field and I do not want to compact the database each time the procedure runs.
View 1 Replies
View Related
Oct 25, 2012
I would like to format the AutoNumber field so that it shows the current year - #...i.e. 2012-01.
View 4 Replies
View Related
Dec 9, 2014
how to reset autonumber field.
View 6 Replies
View Related
May 5, 2005
:confused:
Hi,
I would like how I can generate automatic Id in a table with following structure. billid number, billdate date& time.
I don't like to use AutoNumber built in feature.
Regards.
Soumen.
View 1 Replies
View Related
Jun 22, 2007
Is this possible, and how can I do it?
Adding a second auto number field to current table and auto numbering current entries?
I need to combine some records from the same order number that currently have detailed names. I'm trying to simplify them, but I can't because it creates duplicate records.
View 2 Replies
View Related
Jul 26, 2014
I need some kind of function (I been told) that generates 3 different alphanumeric autonumbers in the same field when adding a new record, starting such field from A-1, B-1 and C-1 to infinite.Because the record gets inserted in the table with an append query and not manually through a form, I believe the function should be placed in the Default Value setting of the field.
View 3 Replies
View Related
Nov 21, 2011
At present I am running Revit Architecture with DBLink to access to edit fields for shelving etc.
What i am doing is fitting out warehouses with 600+ shelving units and they are all numbered.
These numbers are tagged in the drawing.
What I am hoping to do is export the data to access (completed) then amend any changes within access.
Normally, we would put say 600 shelving units on a drawing all tagged 1-600. But then the client may want to delete shelving unit 321.
Leaving the drawing with all shelving units tagged 1-320,322-600.
How would i go about it so access renumbers all data after the deleted field (ie number 321)?
View 2 Replies
View Related
Oct 10, 2013
I have a table (tblContact) with an auto number key field that is numbered sequentially (1-8) there are no deletions, each new record is appended.I wrote a simple FindFirst line to locate a record that is the first record in the table. The FindFirst failed to find the record.So, I wrote a Do Until Loop that cycles through each record looking for the record that I want to find (the first record with key field 1).
Code:
rstContact.MoveFirst
Debug.Print "ContactID: " & rstContact.Fields("ContactID")
Debug.Print "CEmployerID: " & rstContact.Fields("CEmployerID") & vbCrLf
Do Until rstContact.EOF
Debug.Print "ContactID: " & rstContact.Fields("ContactID")
Debug.Print "CEmployerID: " & rstContact.Fields("CEmployerID") & vbCrLf
This works to find the first record... eventually, because it does not begin its search at the first record. The results in the immediate window are below.
Code:
ContactID: 4
CEmployerID: 2
ContactID: 4
CEmployerID: 2
ContactID: 5
CEmployerID: 4
[code]...
I believe the field CEmployerID is unrelated to the issue. I am also attaching screen shots of the table "tblContact" and code with immediate window. I have tried indexing and not indexing the CEmployerID field in the Contact table to no avail. Even though the Do Until Loop eventually finds my record,
View 10 Replies
View Related
Jul 10, 2012
I have
Table called "Products"
Field 1= "Product ID" which is a text field (PK) but numbers are used (ie 1 -20)
Field 2= Products -showing our list of 20 products
When I enter a new product, currently I have to look in the table to find the last ID used then use the next one available. I have created a form to be used for data entry to enter new products
What I am trying to do is :- 1, have the form open at data entry level but still able to scroll and see all records and 2, Have the form auto generate the next number available. For example, I have 20 products entered so when the form opens to enter a new product, the ID is automatically at number 21.
I wondered if its because the field is a text field or I am trying to insert the code in the wrong place.
View 1 Replies
View Related
Aug 30, 2013
creating auto number field in access database. I have an access database which 20 million records. When i am trying to add auto number field i am getting error "File sharing lock count exceeded".Then i did some google search and got some information like editing the registry file , in my case its not possible due to security restrictions.And another option of adding a code in VB immediate window also i tried but this option is also not working.
"DAO.DBEngine.SetOption dbmaxlocksperfile,25000000"
how to auto populate the numbers in a specific field using VBA codes.
View 4 Replies
View Related
Dec 27, 2013
I have a table having the following fields:
StaffNo TextField PrimaryKey
Name
....
...
The data in StaffNo will be alpha numeric, like AKA-111, AKA-112, LMN-100, LMN-102
Here AKA and LMN describes the Sites where employee is working.
On Add New Employee, When user enter AKA- in StaffNo, on exit the next number on that site should be generated. i.e AKA-113.
View 8 Replies
View Related
May 31, 2013
I'm creating a database using existing data from an excel file full of contact details. What I need to add is a queue type system where each contact in the database has a "Place in Queue" number which is unique obviously.
Lets say Alan is number 1, Bob is 2 and Chris is 3. They have these corresponding numbers in the queue field for their entries.
Now what I need to have, through use of a form, is a way of changing Chris from number 3 in the queue to number 1 and thus have Alan automatically shift down to number 2 and Bob to 3.
View 4 Replies
View Related
Jan 21, 2014
I have a form [IUDATA]
I have a add record button.
I have a date field [DATEIN]
I have a text field [DRPNO]
If the [DPRNO] field is empty, I would like the user to have the [DPRNO] field be automatically populated after the user enters a date.
I'd like the format of [DPRNO] to be "dpr YY-XXX"
Where:
YY is the year of the [DATEIN] field and
XXX is number of records in that year.
So for example, if it was the 4th record with a 2013 date the [DPRNO] would be dpr 13-004.
View 12 Replies
View Related
Mar 16, 2014
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
View 8 Replies
View Related
Sep 18, 2006
Hi,
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate()
Dim medlemskod
medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod")
Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000")
End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
Grateful for any advice! Thanks!
View 3 Replies
View Related
Apr 20, 2008
I need to create an auto number for service calls that show the following:
year as 08, 09 etc, month as a letter, Jan = A, Feb = B etc then an incremental number starting at 300 for each month/year combination.
So for example: 08A300
Can anyone help me as I am stuck?
View 10 Replies
View Related
