Auto-Tabbing
Mar 29, 2006
I am trying to setup 3 text boxes to autotab once the required input has been put in.
I have in the table assigned each field the max number that can be inputted, which is 3, 4 and 5. Now when inputting it stops and you have to manually tab to get it to move over which is fine and good...but who I am designing this for wants it to tab. I could use input mask but it uses place holders which I dislike greatly.
I am looking how to do this in code, I am not sure which commands to call up. Right now I have this:
Private Sub Branch_Change()
If Branch.length = 3 Then
DoCmd.RunCommand acCmdTabOrder
End If
I am still learning my code, so laugh at will :) cause I am sure none of that is right. Thanks.
View Replies
ADVERTISEMENT
Feb 2, 2006
Hi guys
I have a form with a large amount of subforms on it.
The problem I am having is that I cannot tab between subforms when entering data.
The cursor just moves within the subform and browses off of the current record (Creates a new record, like when scrolling the mousewheel).
Anyone know how I can set it up so that I can tab betweek all subforms across the entire form and not create a new record?
In addition, I know access 2000/97 users had to use custom code to disable the mousewheel, but I read something somewhere saying that you can disable it in Access 2003 without using code? How do I do this?
Thanks,
Toby
View 3 Replies
View Related
Feb 2, 2006
Hi Guys & Gals,
I have 2 main forms for my database, both with multiple page tabs (I will call them pages to avoid confusion with tabs) and subforms.
I can set the tab order for the various pages to go through the fields and jump to the subform ok. 2 small problems I haven't been able to sort out are:
1) Once I have tabbed into a subform, in datasheet view, the tab takes me through the fields and then to a new record when it reaches the end. I can't tab out of the subform back to the page I came from and onto the next object.
2) When I tab from the last control on a page I want the focus to go to the first control on the next page of the form but what actualy happens is the next record is opened.
Neither of these are a big deal but it means using the mouse when I would rather navigate with a quick click. If I cannot set the tab order to get what I want for item 2, is it possible to put a control button on the page with some code behind it to move me to another page of the form in the same record?
Many thanks in advance.
Regards,
Keith.
View 1 Replies
View Related
Oct 22, 2004
I have a form with two subForms (A and B)
Each of the subForms has three fields on it. (1,2, and 3)
The problem with the way tabbing works is that it keeps the tabbing within a subForm.
If you go to this form and hit the tab button you cycle through the first subForm
A1 -> A2 -> A3 -> A1 -> A2 etc
Is there any way to have the tab effect from field A3 go to B1
I hope this is clear
Thanks
View 4 Replies
View Related
Jul 27, 2005
Is there any way to change the order that the tab button cycles through the different fields in a form? Right now mine jumps ALL over the place and in some case even misses a field.
View 1 Replies
View Related
Feb 21, 2006
I have search the forum and have found many solutions to this same problem but so far none have worked for me. I am fairly new to Access so maybe I am just not understanding properly.
I have a form with a main form and many subforms. All subforms but one are continuous and the other is a single form that does not allow additions.
1. I can tab from the main form to the first subform but can’t get the next subform.
I have tried this on the exit of the first combo box in the subform
Private Sub EventInitialActionTaken_Exit(Cancel As Integer)
If IsNull(Me.EventInitialActionTaken) Then
Me.Parent.[frmeventFsubform].SetFocus
End If
End Sub
This works until I open a new record from one of the subforms and then I get an error.
2.Then, my last subform is the single form with no additions and I want it to tab to a command button on the main form. Right now it just goes in circles throughout the sub form
3.Also, if I ask to start a new record while my cursor is in one of the subforms, the new record will open with my cursor in that subform field. How do I get it to default to the first field in the main form? I tried Me.EventID.Setfocus on the On Load Event of the main form but this didn’t work.
I think that if I get the answer to question 3 then the code I previously used in question 1 might work.
Any help would be greatly appreciated.
Thank you in advance.
View 14 Replies
View Related
Jun 19, 2006
Hello all,
A quick search yielded no results, so here goes. What is the easiest way to automatically tab to the next field once a user has entered the maximum number of digits in the current field?
For example, I have a form with the 3-digit area code in one field, followed by the 7-digit phone number (this was set up originally by someone else, I don't know why the area code and phone number are split up). Since these fields will always be the same length, what I'm wanting to do is automatically set focus to the next field once the user has entered 3 numbers in the area code field, without their having to hit the 'Tab' key. Any thoughts?
Thanks in advance...
View 8 Replies
View Related
Jun 29, 2005
everytime i try to tab from my subform, it creates a new record for that subform. Also, about the subform, the control that links the main form and sub form is unique.
I have now set my Cycle property on my subforms and forms to Current Record. How can I tab from the subform to the main form and vice versa?
Thanks!
View 1 Replies
View Related
Sep 20, 2005
I have a combobox where users can select classes. In the AfterUpdate event for that combobox I have the following code:
Me.ClassCode = DLookup("[ClassCode]", "Classes", "[ClassID] = " & Me.ClassID.Column(0))
I want to populate the Class Code field based on the class they select. The code works fine except that the Class Code field does not update until after I tab past it. There is a field in between Classes and Class Code so I have to tab 3 times before the textbox populates. I expected the textbox to populate immediately after I selected the class. I also tried putting the code in the On Click event of the combobox but that didn't work either.
If I just keep clicking on different classes I'd like the class code to change each time without having to tab to another field. Is that possible? What am I doing wrong?
Rod
View 1 Replies
View Related
Nov 18, 2005
Hello all,
This is my first post to these forums, however I have leeched so much information off of all you guys that I can't even begin to express my gratitude. So, now, onto my problem...
I'm developing a form for our call centre people to enter information regarding customer returns. Customer orders are placed on one of two systems. In my form, when the person is entering info, I have a drop down box to choose between the two systems, which calls up a respective subform to enter system-specific information. The problem I have is that I can use tab to enter the subform, however I can't use it to get out. There are two records in the subform - order date and order number. After I enter info into these 2 textboxes and try to tab out, it seems that the subform goes to a new record. How can I get my form to tab into the next required field on the main form? Hopefully this makes sense, I just read through it and its kinda questionable. Thank you very much in advance.
View 1 Replies
View Related
Jan 24, 2006
Hi,
I have a form with a number of fields and buttons on it. The form is opened in "add new record" mode. I have noticed that when I move from the last field in the tab order to the first field in the tab order it saves an entry in the database.
This is causing me problems because when users move from the last field in the tab order to the field in the tab order an entry is saved to the database but it by passes all the data checks ensuring that certain fields have been filled-in etc.
I don't know why the movement between these two fields is causing an entry to be saved. I don't have code associated with either of these objects. I aslo changed the last field in the tab order to a different field and it still happens.
Any ideas or suggestions would be greatly appreciated.
View 2 Replies
View Related
Feb 22, 2006
I have searched this site and tried several things over the last 3 days and am getting frustrated. All of my forms are built from existing tables.
I have a main form (frmevent) with the primary key being EventID. I have many "continuous" subforms e.g. event type, initial action taken, initial outcome that the user can enter more then one record.
My Event Type continuous subform has a cascading combo box. One combo box displays the Event Category and the other combo box displays the Event Types. I have the cascading combo working so that when the category is selected on those types that apply to it show up.
If the user tabs to the next record and doesn't enter anything in it I want it to tab to the next sub form.
I tried (please note that EventInitialActionTaken is the first field in the form)
Private Sub EventInitialActionTaken_LostFocus()
If IsNull(Me.EventInitialActionTaken) Then
Me.Parent.[frmeventFsubform].SetFocus
End If
End Sub
I am getting a run-time error on the form '2452' The expression you entered has an invalid reference to the Parent property.
What does this mean and can anyone help.
Thank you in advance.
View 1 Replies
View Related
Jul 23, 2007
hello,
I have a main form with one child form. This child form also has a child form. This last child form has two tab controls it. When I tab through fields on the form, I have to reposition the form so that I can see these last fields. Otherwise I have to tab blindly through them. How do I get the form display the fields as I tab to them ? I have to design the forms on the larger size because the users like that. Any suggestions would be appreciated.
thanks !
View 1 Replies
View Related
Jul 24, 2007
Is there a way in data access pages to have where the user tabs to a numeric field in an existing record, that it highlights the data? Or....... is there a way to have currency values null instead of $0.00 in an existing record on a data access page?
The problem I'm having is: For my data access page, the user queries to pull up an appointment. The user then enters various amounts in different fields. I have the tab order set up ok, but when they tab to a field to add an amount collected, it tabs to the end of the $0.00 which makes the user have to backspace 3 times to enter data, or highlight and delete and then enter data....... All of this, of course, is time consuming.
These values are null, but show as 0 in my data access pages.
How can I get these to remain blank, or how can I get it to highlight the data in each field on tab?
Thanks in advance.
View 1 Replies
View Related
Dec 11, 2007
Hi,
I created a form based on head/detail/foot kind of setup.
Now in the detail I have a combo box and a textbox. Is it possible for me to set focus to the next line textbox after the combo box fires onExit trigger?
so for instance:
form is empty. Fill in textbox, choose from dropdown, and then on Exit the focus is set to the next line textbox.
Thanks,
View 2 Replies
View Related
Oct 21, 2013
I have a form with a tab control on it. The input for respective fields are placed inside the tab control, and I have the "Confirm" button placed outside, on the main form. Now I wanted to be able to navigate my focus from a control from inside to tab control, out to the Confirm button on the form, to allow smooth flowing data entry.
However, it seems like Access separates the tab indexes for the controls in the tab control and outside on the main form, so setting tab index does not work. I tried using the code ON LOST FOCUS and SET FOCUS;
Private Sub txtPurchaseNote_LostFocus()
Forms![frm Imported]![cmdConfirmPurchase].SetFocus
End Sub
But then a dialog box appears:
Run-time error '2110'
Microsoft access can't move focus to the control cmdConfirmPurchase
(cmdConfirmPurchase is a button control)
View 2 Replies
View Related
Aug 5, 2013
I have an interesting Access problem. When doing a query, and it does not matter which Access file it is all of them do it, if you tab out or click to another screen, sometimes, the query will stop. I have tried many different network related fixes but no luck. I am thinking the issue is with Access. I have no issue with Excel on Access files.
View 3 Replies
View Related
Aug 25, 2004
Newbie Access user here, with what I hope is a fairly easy task--
I have a form which contains fields for info about clients and a subform which has only one field for a corresponding video tape number. Is there any way to limit the record for this subform to one single entry, so that when I hit Tab after entering the single number, the second record in the subform will not appear, but rather I can jump to the next record in the main form?
If not, then can I just tab through the main form, into the sub form and then onto the next record? Is there a shortcut to create the next record other than having to manually mouse click the next record arrow at the bottom of the form?
View 1 Replies
View Related
Mar 20, 2006
we use access database for printing lab reports. and a small graph is also printed on this report from another software(not an access application).
what i have done is that first we print the txt report from access and then use the same paper to print graph on it. I have alligned the report in such a way that these two reports fit perfectly.
we have to print twice and sometimes the graph is deleted in the other application, so we have to make the graph again.
what i want to do is:
1) prepare graph in the other application.
2) take a screenshot of it.
3) save this as an image file (jpg or bmp)
4) reference this picture in the access application and print it with the report.
So the problems are:
1) when i take a screenshot, how do i save it as a file,
2) how do i just get the area of the graph and remove all extra space. (usually all the other space is white as background)
View 6 Replies
View Related
Sep 1, 2005
Hi all!
I was wondering if you guys can help me out with this one:
I would like to have data auto-inserted from a particular colum in table 'x' in to a defined column in table 'y'. similary, I'd like to achieve auto-updation of this data as well as deletion. Can anyone please provide some guidelines?
A little more detail :
I have a column "Client ID" in the table client_personal_info, the rows of which I'd like to have updated in the "Client ID" column in the client_business_detail table.
So if say, ClientID_1 is a row that has been added by the user, I'd like to have it auto-inserted in the client ID column in the client_business_detail table
thanks in advance for your help
View 5 Replies
View Related
May 22, 2014
Access 2010 keeps changing the Capitalization of objects when I don't want it to.
For example "Cancel" becomes "cancel". Later it will be changed back to "Cancel".
There is also a table with a field "FULLNAME". Several Queries build a field "FullName". As a result FullName, even in places like Application. CodeProject.FullName get changed to Application.CodeProject.FULLNAME.
(Track Name AutoCorrect is off. ) It is especially irritating because I export the code to text files and check it into source control. Sometimes dozens, or even hundreds, of files will show up as changed because Access did it's rename thing.
View 3 Replies
View Related
Oct 26, 2005
Here is my issue. In a table with an Auto Number index some records have been deleted. I have been able to recreate them along with their original auto number. The problem is that I do not know how to append these records forcing the original auto number. I have tried changing the auto number field to a number field in the table, this works except I cannot change it back to auto number.
I am sure I’m not the first with this question or issue. I did search through a couple hundred entries about auto number before I posted this question.
Jim
View 7 Replies
View Related
Mar 11, 2005
Is it possible to have a select query which has a where function that automatically includes the Day?
In this case I don't mean the date, but something like "Tue" or "Wed".
Or is this only possible to have the user enter this himself?
Greetings and thanks again,
Lion85heart
View 2 Replies
View Related
Jun 8, 2005
I've tried googling this, but I can't find anything helpful. I have five columns in my 'Main' table. In each row, column B, C & D are solely dependant on column A. And column E is completely independant of all of them. I want to be able to select a choice in column A using a drop-down menu (which I know how to do) and have columns B, C, & D automatically fill themselves in (which I don't know how to do). Column E I would just manually enter.
How do I get columns B, C, & D to automatically fill themselves in my 'Main' table. I would select a value from a drop-down menu in column A and want everything else to fill in. The values for A,B,C,& D are all in seperate tables with an ID and linked to their respective fields in the 'Main' table. Appreciate any help.
View 1 Replies
View Related
Nov 18, 2005
Hi all,
Is it possible to have different colour fonts in forms automatically?
i want the user to add numerical data into the form but the middle numbers must automatically be coloured red. these numbers are then matched to stickers in the same format for easy identification.
it should look like this 878802
any suggestions?
Many Thanks
Sam
View 2 Replies
View Related
Nov 24, 2005
If am a developing the db and just making alterations to forms and reports etc on a developing copy. Is there anyway i can auto pull and replace the ones in the live db rather than going into the live db, deleting all the forms etc and then importing it?? can it be scripted or somethign like that?
Thanks
View 1 Replies
View Related
