Auto-fill Based On A Field Other Than Bound Column?
Feb 9, 2015
Access 2010. The first table is called Clients.The Primary Key field for the Clients table is an AutoNumber field called ClientID.The other two relevant fields in this table are ClientFirstName and ClientLastName. The second table is called Contacts.In the Contacts table is a foreign key field, bound to the ClientID field from the Clients table, and also named ClientID.
On the Contacts table, the ClientID field properties are set on the Lookup tab as follows:
Further, in the Row Source's Query Builder, ClientFirstName and Client LastName both have Ascending selected as Sort criteria.
Everything works as intended: When entering data into the the Contacts table (actually, the data is entered via a form built from the Contacts table) the data entry person can click the drop-down on the combo box for the ClientID field, scroll through ClientID records, and see unique ID numbers sorted by first and last names. And the actual data for the field is stored properly as the unique ClientID number.
When entering ClientID data into the Contacts table (or form), is it possible to enable autofill based on ClientFirstName and ClientLastName, rather than ClientID? For instance, let's say we have a few clients named Joe Smith. It would be great to just start typing "Joe Smith," and have the field autofill the ClientID number for the first client named Joe Smith. The intention is to make data entry a bit quicker.
How do I get access to auto fill a text (supplier)? I realize that for a new supplier I would have to input the supplier name, however my question is what should I do for Access to enable auto-fill so that the next time I have to input that supplier it would auto fill for me. This is happening in a single column.
For example: In the supplier column, I typed Dell in the first row, Apple in the second row, HP in the third row. Now when I start typing 'Apple' in the fourth row, I want it to autofill 'Apple' because I have already input that once.
In my database I have a table of customers and a table of orders (where many customers have more than one order, so the primary keys for each table are customerID and orderID).
My database has four fields: ItemName, ItemNumber, Description, and RelatedItems. I would like to create a query that will search every Description in the database and return that data in the RelatedItems field. The query should fill the RelatedItems field with a list of every ItemName and ItemNumber that contains the ItemNumber of the current record.
I have a situation where, in a query, I need to autofill the column called "Xferd Vendor No" from the column called "Vendor No", where if the data in the Vendor No column changes, then the autofill changes to match.The one called Autofill Raw Data.xlsx shows the expected query results. The one called autofill Final Output.xlsx shows the final results I need when the task is completed.
My problem is I have two tables. One of the tables was made specifically to draw information from to populate the second table. The second table has a combo box that draws information from one of the fields from the first table. What I am hoping to do though is have each selection from the combo box in the second table to draw different information from another field in the first table and use that data to populate another field in the second table.
Simplified: Combo box in Field (1) on table two has multiple selections that I want to autofill the data in Field (2) on table two based upon the selection of the combo box. Data from both fields in table two would come from two different fields from table one.
I have tried to work with the After Update button in the After Events section on the ribbon at the top; however, I am simply lousy with coding. Is there an easier way to do it other than using that option?
I've got two tables, Member & VBS. They are linked (many to one) via the EnvNum. I have a form that has all the information I need for VBS. I was wondering how could I go about typing in the first and last name (each in their own field) and having access find the EnvNum and Automatically filling that in?
I know how to do it with a combo box, but we have over 300 members and usually get over 100 kids for VBS, and the kid may not be registered as a member. I thought about making a form to enter the first and last names, then have a button that would open up the registration form with the EnvNum, FName, and LName fields filled in, but I'm blanking today and can't figure out how that would go.
So, I have a form and I need it so that when one field is selescted, the other 2 auto fill based on my selection. The form is based off of a Table, "TblClient" and The fields are ClientID (PK), InventoryType, Policy, and DueDate.
I want the user to type in the ClientID, and then once they select InventoryType, Policy and DueDate are autofilled. I have another table, "TblData" that has the data for InventoryType and the coresponding Policy and DueDate associated with each one. So far, I have a combobox for InvnentoryType with a query for rowsource for InventoryType with the width of these additional columns to zero so they are not displayed in the combo. Then, I added unbound text boxes to my form (one for each additional field) and in the Control Source of those text boxes I put:
In the first unbound text box;
=[InventoyType].Column(2)
This worked for me, but now I realize that I want to give it the option that once these are autopopulated, they can be edited. For example, the policy most of the time is exactly the same for a certain inventory type, but sometimes, a word or two needs to be changed. Is this possible?
I have created a form based off of one table. I have added an unbound combo box so a user can select a department's number and would like department name and accountable officer to auto pop/fill based on the dept number selection. I'm not sure what I need to put in the "After Update" in the properties in order for this to work.
I have a combo box that autofills a text box, this has duplicate values and I want to fill the text box based on the selection of the combo box.
Let me explain:The combobox is Suburb, the text box is for Postcode, the data has multiple matches for example FRANKLIN has a postcode match of 2913 in ACT and also 7113 in TAS.
From the combo box I select the record that matches 7113 but 2913 enters into the text box.
This is my code: In Row source of the combo box I have - SELECT [Australian Postcodes].Locality, [Australian Postcodes].Pcode, [Australian Postcodes].State FROM [Australian Postcodes];
In Event on change I have -
Private Sub Suburb_Change() Me.Postcode = Me.Suburb.Column(1) End Sub
how to change this to be based on the selected record from the combo box?
Hi, I've been working on a database to keep track of employee time off, It consists of the main table, a employee table, and a department table.
I had a form that our admin uses to enter the info for each employee.
They would select the name of the employee from a drop down, and then select the department that employee is in from another drop down. then they would select the days off and reason ect. Then when finished they would hit submit and this would be entered into the main table.
Well they just asked if it would be possible to make it so when they enter the employee's name, that the department would automatically be filled in for the employee.
Is this possible? I'm trying to think of how to do it, but not coming up with anything.
I've created a listbox and am using the following code
stWhat1 = "": stCriteria1 = "," For Each vItm1 In Me!LstArchive.ItemsSelected stWhat1 = stWhat1 & Me![LstArchive].Column(0, vItm1) stWhat1 = stWhat1 & stCriteria1 Next vItm1 Me!txtCriteria1 = CStr(Left$(stWhat1, Len(stWhat1) - Len(stCriteria1)))
The problem is that my bound column is a text field. I'm really struggling on where to put my quotations so that I get the following with the In function In('00638','00639').
Any help or pointing in right direction would be very much appreciated Carrie
I'm using Access 2007. I've created a table with two fields. "Novice and Recertification" as in combo box.
I put it on the form. Now the idea is when a user clicks Recertification, it shows up on the report. When the user clicks on Novice, it should be empty on report (Reason why I want to keep novice is so that we have a record of it.)
Now the challenge is I added another column, empty field for Novice and Recertification for Recertification. Thing is if I set the bound column, I select on an empty field on form and it will be empty on report. But I want the user to see Novice on the form and it must not show on the report.
I understand right off the bat if you're reaction is "don't duplicate data!!" -- mine would be too (don't fret, I know my normalization).
I've linked a table in my db to my Global Address Book in Outlook 2007 and, upon entering an employee number as a new record, would like to verify that the number entered is listed in the GAL and then pull in the associated name and location info.
The key is that I don't want this info to rely on the GAL going forward. For example, if an employee leaves or is no longer listed in the GAL, I don't want to lose the employee info (past data is needed for audit purposes). Note: I will be creating a report later to show if there are discrepancies between the GAL and my table, but that's another story...
So, what would be the best auto-fill options in Access 2007?
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
hi. this might be simple for others but i'm new with access. how can i automatically fill a YES/NO field referring to a Text field. which means, if the field is EMPTY, it will automatically say "No or False" in the Yes/No field, or vice versa.
thank you people of great minds and kind heart. more power to you all.
I have a table called Client Info which stores the clients name and their requirements (Gas safe etc). And I have a table "Job List" where i select from a drop down menu the clients and it auto fills all the requirement check boxes based on what is stored in the Client Info table. However I can't get the code to work.
Private Sub Client_Click() [job_list].[Gas_Safe].Value = [client_info].[Gas_Safe].Value End Sub
I've just returned to work after kids and started managing a large Access database related to health, back-tracking over many years.
Currently in filling a form we physically enter: Apples 2.2 red apple 2.4 red apple cut 2.45 Oranges 5.6 Cucumbers 8.5
Is it possible to get field 2 to automatically fill with a number code due to the text typed in field 1?
FWIW, I'm confident at more basic Access e.g making follow on default value = Dlast("field""table") type stuff but the more complex stuff I haven't touched since Uni over a decade ago and you will need to be gentle while I blow away the cobwebs
1 Master Input Table. 1 Job Lookup table - (contains Job Number and Name)
When in-putting job details into the Master Input table i would like to enter the job number only and have the job name appear automatically without running a query, much the same as a 'vLookup' command in excel.
I am trying to autofill a field based on another field but am not sure the best way to accompish this. I have a database that includes an employee table which has an Employee ID Number (EIN), name, address, etc. All my employees are listed in that table (full time as well as temps).
I also have an attendance table, which i have created a form to input the information. When a full time employee is off, they are covered by a temp. So, the form includes a field for the guard who is off, how many shifts they are off and which temp employee worked for the full time employee and for how many shifts. My payroll department needs the employee ID added to each employee (full time and temp) on the payroll report.
My Report is formated by Guard Off with a start date and end date to coincide with our pay periods. Multiple people enter info and then a bi-weekly report is sent to payroll. The report lists the employee off and then sorts by date and lists the employee working that date and shifts worked. (I hope that makes sense)
All the employee information is in one table. What I would like is when a name is selected on the form for Employee Off from a list box the EIN is automatically added to the EmployeeEIN field in the attendance table(the name in the list box is pulled from the Employee table). I also need the same for the Temp employee. When a name is selected from a list box for the temporary employee the TempEIN is automatically selected from the same Employee table based on the name selected.I can go into relationships and link the name in the Employee table with one name in the Attendance table, but not both.
I am new to using ACCESS. I have a database that has several tables which generate forms for my office to print for client files. I have these forms set to print based on a query that will only pull the ones that have a form printed field not selected, if that makes sense. What I would like to add is a field right next to the form printed field that allows us to enter the date the form was printed. I have added this field but now would like to take it a step further and have the date automatically fill once the form printed field is checked.
I have two separate tables (called inventory and job log) and they have a few of the same field items (number, name, style 1, style 2, and area).
I would like the job log table to autofill the name, style 1, style 2, and area when you type in the number when logging a new job (pulling this information from the inventory table)..
I have 2 tables named Candidates & Comments. CandidateID is the Primary key for Candidates and CommentID is the primary key for Comments.
I have CandidateID as a foreign key in the Comments table to link the two together.
I have a form "frm_CandidateMain" which lists a candidates details and a subform within it "frm_Comments" (in datasheet view) which lists comments that have been made for that candidate. These forms are linked by CandidateID as the Master/Child fields. This is working fine, and when double clicking the comment field, another form opens "frm_expanded" which is a pop up and has a larger field to that detailed comments can be written/read without the need to scroll along in datasheet view.
However, when double clicking on a blank line in the "frm_comments" field the "frm_expanded" form opens a blank form with no CandidateID selected, but I'd like it to auto populate the CandidateID from the main form that is currently open.
I've tried to do with with a Macro within Macro builder, but failed to do this.
I have been away for Access for a long time and having issue with making a query. I have 3 tables. "tablEmployee" has employee ID, first name, last name and sizer ID. "tblproduct" has product ID, Description and rate. I made a new table called tbldata which has date, product code, product description, product rate,employee id, employee sizer id, and lbs. I want a query when I enter the product id in tbldata, query auto fill the product description and rate. also same as employee.
I have a form that is populated by the User via a combo-box lookup. I'm trying to get an unbound field on the form populated after the combo-box is updated; the goal is that the field will have a value from a table (other than the form source) whose record can be found using the value from the combo-box.
Say for example, the User selects an OBJECTID of 100 and the form populates. There is another table in the database that has an OBJECTID field but that also has a different code or designation for the same asset. This is the value I want to pull into this field. I have tried the DoCmd.SearchForRecord approach, but Access doesn't seem to be buying it.
Is there a direct way to reference this value into the field, or do I need to consider making a query the source of the table and going that route?