My friend is looking for the database to auto populate a date, based on information already entered.
A Learner Starts his/her private tuition lessons on dd/mm/yyyy and pays for 6 weeks, the next lot of payments is due on dd/mm/yyyy...
I'm trying to figure out a way to get my access database to auto-populate data into a field based on the information I type into the first record.
So what I'm looking to do is that when I type a name into the UserName Field it will automatically fill in the rest of the field with the same information.
To clarify I'm looking for a way so that when I type something into one record it will fill the rest of the field in with that same information.
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
View 8 Replies View RelatedI need to create a New Form control for this situation:
If I enter a date into a field and the choice for another field is equal to a certain value. How can I get the date I entered to be automatically populated into another date field.
For example:
If I enter 11/10/2005 in a date field and I choose either "BN", "BA", or "BT" in a text field, I need that date of 11/10/2005 to be automatically populated in another date field on the same form.
Any help is greatly appreciated.
I am building an Access database for a client. It is an employee staffing database. With that being said they would like the ability to automatically populate the "T2PPCD" date field based on what is entered into the "Report Date" field. (Same table)
The date is the Monday after 180 days from the report date.
I already know how to get it to auto fill 180 days from the "Report Date" but I'm not sure how to tell it to give me the Monday after 180 days.
Microsoft Access 2003
Novice and working on a project with deadline... please help.
I have a table w a field that I want to convert into a combo bo and use data in the field as the options:
FIELD: Student Status
OPTIONS:
Enrolled
Suspended
Withdrawn
How do I get the combo box to automatically pull the values from that field into the options in the field when u pull down the drop down box?
Am I being clear?
I have a form where users fill in a date resolved and click complete in the Option Group, it's default value is incomplete. I have a problem with the users forgetting to change it to complete when the enter the date resolved. Is there a way to change the option group value when the date resolved is entered?
View 6 Replies View RelatedI have a form where users fill in a date resolved and click complete in the Option Group, it's default value is incomplete. I have a problem with the users forgetting to change it to complete when the enter the date resolved. Is there a way to change the option group value when the date resolved is entered?
--- OR ---
Can it notify the user that they need to change the Option Group?
I have a form with a text box where the user enters a date and then clicks a button titled "Add." I've added an on-click event to the Add button that runs an append query that adds several records to a table [tblTracking]. I have a field in tblTracking called EndDate. I want the date that's entered into the text box by the user to be populated into all the new records added to the tblTracking when the append query is run. Currently, all fields in tblTracking are populated when the append query is run, except the EndDate field.
Is this possible? If so, how?
I've experimented with adding a separate on-click event that adds a record to a separate table containing only the date entered in the textbox and an auto-populated ID field. I thought there might be a way to utilize the ID field to pull the associated EndDate into the Tracking table, but I can't figure that out, either, since I don't know how to tell it to look at the date field in the last record of the table. That sounds unsafe anyway.
I would like to put a date in a form the region and then a staff code and based on the three entries then auto populate the remaining cells if those three have been entered together previously. Is this possible?
View 3 Replies View RelatedI have three tables with the following columns:
MoldReq
Mold_NoPart_NamePart_NoMaterialDateWork_Ord(Pri Key)
MoldLog
Log_IDMold_No(Pri Key)Part_NameLog_DateTime_InTime_OutHours
Molds
Mold_No(Pri Key)Part_NamePart_No
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code:
Private Sub cboCombo31_Change()
Me.txtPart_Name.Value = Me.cboMold_No.Column(3)
Me.txtPart_No.Value = Me.cboMold_No.Column(4)
End Sub
I am trying to populate multiple text boxes from combo box using one table. First text box is getting populate on base of combo box value while 2nd text box is not getting populating.
I have used the following to populate the text boxes, even row count is correct, But why is not 2nd text box is not populating ?
=[Combo2].[Column](1)
=[Combo2].[Column](2)
One thing I noted when I provide the control source then selection gets stop from combo box...I am giving the valid control source is customerID but its not working.Could it be the reason ? Why selection gets stop from combo box when provide the control source ? If remove the control source then 1st text box is getting filled on basis of combo selection and 2nd text box value is not getting filled as describe above.
I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO
Company
Address1
Address2
City
ZP
State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I have two forms - Main and StudentAdvisor (filtered by student ID#) SAdvisor.jpg
The main form originally had a combo box field to display advisor, the problem is that some students had multiple advisors during the course of their program. This problem was fixed by the creation of a StudentAdvisor (table/form) for recording ALL advisors. I set the form to display by newest term so the current advisor (or initial if no change) is the displayed record.
On the main form I then added "add" to open the StudentAdvisor form for entering information, and an unbound txtfield to display their current advisor (or initial advisor if no change).
The problem is I can not get the txtfield to display the information. I have managed to get the error ( #Name?)
Advisor Type 1=Initial, 2=Current, 3=Previous
Changed 1=Yes, 2=N/A
so a record would record as:
Initial and N/A
Current and Yes
Previous and Yes
I tried writing DLookup but could not get that to look up the combinations (above) and display either initial or current.
also tried pulling form SA = Advisor to form Main = txtAdvisor
For report purposes I need to know not only current advisor but how many were assigned during the program and also how many students each advisor was assigned during certain time frames.
How can I auto populate fields based on a payment term & amount?
example: client has 9 monthly payment of $150 term due every 15th of the month. (I would like it to be able to max out at 30 months)
So what I want to do is populate 9 monthly fields with dates and $150 payments fields next to it. Now, the payment fields even after auto populate, must be flexible in the sense for me to add a different amount just in case client makes an over payment that month too. In, addition I would like a check mark box to auto populate along if possible based on the 9 month term, this way I can manually check TRUE when payment is received in office.
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
Is there an easy way to auto-populate a Junction table [in access 2010] given the following two tables with a many-to-many relationship for Tasks? The two tables are
Table 1) tblTasks (TaskID (PK), Description), and
Table 2) tblMeasures (MeasureID (PK), Description, Tasks)
If JCTN table is JCTN_Tasks_Measures (TaskID, MeasureID), is there a way to populate when tblTasks(TaskID) == tblMeasures (Tasks)?
I'm creating a DB for tracking time. I have a form with a subform. The main form is the employee data, the subform is their time sheet. What I would like to do is when I enter the date on the subform the pay period number will auto populate in a text field. I have created a table with three columns - PK auto number, Date, and Pay Period Number. I created a relationship between that table and the time sheet table using the date. I don't know if that's right or not. I have read about auto populating from a combo box but that's not what I want.
View 4 Replies View RelatedI am looking to (on the mainform) have the user enter into a text box whatever date they would like to enter and have that value become the current date of the system. So that all operations are based off of this newly entered date.
View 4 Replies View RelatedI would like a date field I have set up to auto populate the current date when I click on another field to enter information.. how would I do that?
View 5 Replies View RelatedI need to autopopulate a field with now datestamp when another field has been filled in?
View 10 Replies View RelatedFirst hurdle in my database tables, I have a field called Date_Created which I want populated just once, whether from a form or an import.
I have another field called Date_Updated which I want to update any time the record is changed. I know I can do this by using the default value of Now(), but how can I get the Date_Created field just to update when the record is created and not any time after ?
I also want to show these values on the form, but have them as view only, hoping that is possible ?
I am new to Access and have started to move across some Excel based programs.
I have a simple example with two tables and a form where on the form a customer ID is entered which displays the name and below it is necessary to enter the total payments made by that customer for the day ( all records for the same day are entered at one time, which is why I would like to autofill the date).
I can enter the date directly on the form for each customer entry but I would like to automatically enter the required date in the payment table using the value of a datepicker on the form to ensure that no date errors are made.
I have been trying to use the expression builder to do this but the datepicker does not seem to appear as a valid option.
I'm currently building my first database for a research project. When we enroll a participant, we need to have an enrollment date/time as well as an activation date/time (and they are not allowed to be the same because, rules). I was able to figure out how to auto-populate the current date/time when we've marked a person as enrolled. What I'm wondering is if it is also possible to auto-populate another field with the date/time, ten minutes in the future?
View 3 Replies View RelatedI have created a basic Volunteer Events and Hours Volunteered tracking database.
I created a form Volunteer Hours to allow an end user to use that form to record the volunteer and hours volunteered on a specific Event. There are two tables needed in the form Volunteer Hours to be used for the end users to record the Event, Volunteer, Date and Hours. The form has drill down fields from two tables:
Table A - Volunteer Events (event name, date, descr, owner, co-owner, loc, status)
Table B - Volunteers (name, co, div, emp#,title)
I want to be able to select the Volunteer Event and have the event date automatically populate in the Volunteer Hours form date field when the Event is selected to eliminate the end user from having to enter the date in.
Also; I would like to be able to add more than one volunteer at a time to an event on the form, this would also decrease the data entry time.
Are one or both of these things possible?