Is there an easy way to auto-populate a Junction table [in access 2010] given the following two tables with a many-to-many relationship for Tasks? The two tables are
Table 1) tblTasks (TaskID (PK), Description), and
Table 2) tblMeasures (MeasureID (PK), Description, Tasks)
If JCTN table is JCTN_Tasks_Measures (TaskID, MeasureID), is there a way to populate when tblTasks(TaskID) == tblMeasures (Tasks)?
I explain , I have 5 tables :
Class ( classID , classname,... )
Student (studid , firstname, lastname , classID ,....)
Course( courseid , coursename )
Term ( termid , termname , begindate , enddate )
Score ( scoreid , studid , courseid , termid , score)
Note :
1) A class can contain one or more students (one-to-many between Class and Student tables)
The table "Score" is a junction table between three tables : Student , Course and Term because it contains three foreign keys ( I could use a combination of 3 foreign keys to make a primary key ! ) .
The tables ; "Class", "Student", " Course ", "Term " already contain data for each table I created a data entry form .
My biggest problem is how to create a form to enter students' grades or scores for each student that belong to his class.
I do not know how to do it especially since the idea is that :
On a form I would like to use ComboBox to select a class that displays student's list from class selected and a ComboBox in same form to select course and another ComboBox to select a term and then enter grades or scores for each student
This is my general idea to enter students' grades. The rules are :
A class contains one or more students
Each student takes one or more subjects.
Each student gets scores for each subject and each term(quarter)
Within my table if Field 1 has an answer of Self (from drop down), then, I would like Fields 6-12 to auto populate; however, if Field 1 does not have an answer of Self, then leave Fields 6-12 blank.
I am not quite sure how to lay this out. I am using Access 2010.
I have three tables with the following columns:
MoldReq
Mold_NoPart_NamePart_NoMaterialDateWork_Ord(Pri Key)
MoldLog
Log_IDMold_No(Pri Key)Part_NameLog_DateTime_InTime_OutHours
Molds
Mold_No(Pri Key)Part_NamePart_No
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code:
Private Sub cboCombo31_Change()
Me.txtPart_Name.Value = Me.cboMold_No.Column(3)
Me.txtPart_No.Value = Me.cboMold_No.Column(4)
End Sub
I understand right off the bat if you're reaction is "don't duplicate data!!" -- mine would be too (don't fret, I know my normalization).
I've linked a table in my db to my Global Address Book in Outlook 2007 and, upon entering an employee number as a new record, would like to verify that the number entered is listed in the GAL and then pull in the associated name and location info.
The key is that I don't want this info to rely on the GAL going forward. For example, if an employee leaves or is no longer listed in the GAL, I don't want to lose the employee info (past data is needed for audit purposes). Note: I will be creating a report later to show if there are discrepancies between the GAL and my table, but that's another story...
So, what would be the best auto-fill options in Access 2007?
How can I auto populate fields based on a payment term & amount?
example: client has 9 monthly payment of $150 term due every 15th of the month. (I would like it to be able to max out at 30 months)
So what I want to do is populate 9 monthly fields with dates and $150 payments fields next to it. Now, the payment fields even after auto populate, must be flexible in the sense for me to add a different amount just in case client makes an over payment that month too. In, addition I would like a check mark box to auto populate along if possible based on the 9 month term, this way I can manually check TRUE when payment is received in office.
I have a table called Jobslog which contains records for my permanent jobs I have to do for customers in one week.Structure is like:
JobID
TeamID
DayName
JobDescription
Instructions
Each job is assigned to a team, but is following same schedule every week.Can I create like a module or query to autopopulate the table with next week jobs, but putting the date as well, not only day name.For example, each Monday job should have a date field which should be 8/12/2014, Tuesday jobs should have 9/12/2014 and so on until Sunday.Usualy they are more jobs for each day (not day and job).
I have two forms - Main and StudentAdvisor (filtered by student ID#) SAdvisor.jpg
The main form originally had a combo box field to display advisor, the problem is that some students had multiple advisors during the course of their program. This problem was fixed by the creation of a StudentAdvisor (table/form) for recording ALL advisors. I set the form to display by newest term so the current advisor (or initial if no change) is the displayed record.
On the main form I then added "add" to open the StudentAdvisor form for entering information, and an unbound txtfield to display their current advisor (or initial advisor if no change).
The problem is I can not get the txtfield to display the information. I have managed to get the error ( #Name?)
Advisor Type 1=Initial, 2=Current, 3=Previous
Changed 1=Yes, 2=N/A
so a record would record as:
Initial and N/A
Current and Yes
Previous and Yes
I tried writing DLookup but could not get that to look up the combinations (above) and display either initial or current.
also tried pulling form SA = Advisor to form Main = txtAdvisor
For report purposes I need to know not only current advisor but how many were assigned during the program and also how many students each advisor was assigned during certain time frames.
In my UpdateForm I have 3 fields. PartNumber, Description and SerialNumber. I use 2 tables for these. My MainTable and PartsList Table.
In my PartsList table I have the list of PartNumber in Column (0) and Description in column (1).
In my MainTable I have 4 fields: TransactionID (autoNumber), PartNumber(text), Description(text) and SerialNumber (text).
Now, In my UpdateForm I want the user to just select the PartNumber with a combo box (that also show the "Description" (I created this using the combo box wizard)). But I want to auto populate the field in my "Description" text box every time the user will enter new record and will also update my MainTable with all the values they entered in my UpdateForm.
I tried this codes in the after update of PartNumber combo box (properties):
Description = Partnumber.Column(1)
I tried also:
me.Description.value=me.PartNumber.column(1)
both codes unsuccessful.
I have a table ([AllNames]) that a field ([Past_Employers]) is being auto-populated, and I don't want it to.
[Past_Employers] population is setup form a form, which references a separate table of employer names [Employers].
If I enter a new record directly in the [AllNames] table the [Past_Employers] field populates.
[Past_Employers] is a multi-value field (yes ugh - I know!!!) and is not required.
I don't have any database experience whatsoever so please go easy.
I'm guessing this kind of this is extremely simple for all of you.
I'm constructing a database of network resources and devices and I'd like to automatically update the values in one field based on the values of a field in another table.
The first table is called "IP" and the fields are called "Address", "IP Type" and "Device".
The second table is called "Devices" and contains the fields "Name", "Description", "Asset Number" and "IP".
Here's an example of the tables: (ignore the "code" tag. i've only used it to align my columns properly)
DEVICES:
NameDescriptionAssetIP
XserveFile Server107203.30.144.75
ProliantXDHCP119203.30.144.15
IP:
AddressIP TypeDevice
203.30.144.75Static
203.30.144.15Static
What I want is for the Device field in the IP table to automatically update it's values based on the values found in the Devices table. In this case, the values that should appear in the Device field in the IP table are "Xserve" and "ProliantX".
I've searched through but haven't found a complete solution, just little pieces which I'm too inexperienced to put together myself.
thank you
-Tim
I have with my database. It's holds cost data including purchase made in foreign currencies which need to be converted to GBP using the correct exchange rate so a variety of reporting & stats can be performed.I have a table called Costs within which there are 2 fields
Purchase Currency
Exchange Rate
I also have another table called Exchange Rates 13/14 within which there are 2 fields
Currency
Exchange Rate
When a value is entered in the Purchase Currency field on the Costs table (this is a look up field linked to Exchange Rates 13/14 so it shows the listed currency in drop down) I need the database to automatically populate the Exchange Rate column in Costs i.e. match the value in the Purchase Currency field to the Currency field in Exchange Rate 13/14 and populate with corresponding Exchange Rate from Exchange Rate 13/14.I have tried the following and none work:
SQL Tried
1.
UPDATE Costs
SET ExchangeRate = [Exchange Rates 13/14].[Exchange Rate]
WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
2.
UPDATE
Costs
SET
ExchangeRate = [Exchange Rate]
FROM
[Exchange Rates 13/14]
INNER JOIN
[Exchange Rates 13/14]
ON
Costs.[Purchase Currency] = [Exchange Rates 13/14].Currency
3.
SELECT [Exchange Rate]
FROM [Exchange Rates 13/14]
WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
I know it is possible to have a drop down for Purchase Currency which shows 2 columns (both Currency and Exchange Rate) you can then use the exchange rate figure for a calculated field. The problem I have is that I am importing data into the costs table from excel. In Excel I can only have 1 value in the Purchase Currency column on the upload template. If I just have Euro in this column the database does not match it to the Euro in the Purchase Currency drop down and also store the correct exchange rate.
Or is the alternative to put this into the calculation of GBP Unit Cost where this somehow matches the Purchase Currency in the Costs table to the Currency field in Exchange Rates 13/14 tables and uses the appropriate exchange rate from Exchange Rates 13/14 to calculate GBP Unit Cost in Costs table.
I am wanting to populate a control in a form based off of two different fields in one table. Is that possible?I have a table called tblEmployeeMaster and it has a LastName column and a FirstName column in which I need to have both first and last name show up in one box on my form?
View 6 Replies View RelatedI have a main screen that has a tabbed form in it. Each of those tabs has a sub-form in it that displays information and allows some information to be updated.
In one tab I have a query based sub-form that returns information related to the project. This information cannot be manipulated or changed as it comes out of a company managed database. I would like the analysts to be able to add more granular information to a new table by inputting information in a dropdown field for one of the new table fields, but utilizing two of the existing sub-forms fields as identifiers in the new table.
I have an events table and a junction table that has a composite key with two fields; those are the only fields on the junction table and are FKs in my events table.
I have a form that fills in events to my events table and also fills in values to my junction table. The control source is a query of the two tables along with a couple of other reference tables for metadata associations. The form works fine... the first time. My problem is that, after I have entered an event that has my unique composite key for the first time (thereby entering a new record to my junction table), once I go to enter a second event that uses the same key, access tries to enter the record again and throwing a "3164: field cannot be updated" error instead of referencing the already created composite key.
I have the form set the composite values to the selected values on form load. Normally, I would just set the primary key to the primary key values and access would follow my logic, but in this case it always tries to make a new record.
I'm creating a database that keeps a track of questions and scores.
The questions in the database need to be dynamic and are changed frequently.
I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.
I want the question field in my scorecard table to populate with the value in my question table.
I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:
SELECT tblQ1.Q1
FROM tblQ1;
This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?
I have a few fields that are the same across a couple of forms and sub-forms (each form/sub-form being represented by a different table). I would like for data entry into one field to ensure that the data is autofilled into the other. ie if I type 'ENG' into field 1 on form 1, it will autofill the equivalent field in sub-form 2 as 'ENG' so that I do not have to type the same thing twice. These entries are not unique or in any order as it is variable depending on the entry and so they can't be linked as primary keys and foreign keys. So how would I do this? I would like to avoid VBA is possible.
View 1 Replies View RelatedMy situation is this. I have 3 tables that I have imported from my mainframe system, between these 3 tables I have the data of product code, description,supplier code, supplier name, order method, and ABC code.
I am trying to create another table that I can capture daily Out Of Stock data for products.
What I would like to do is to enter the product number in the first field of my new table, and then the remaining fields will auto populate with the correct details based on the product data stored in the parent tables that I have imported.
How can this be done?
I am creating a database to keep up with the expenses for my art business. I have a table for Vendors with a field (Mileage) for one-way mileage that I enter manually (EX: 11.8 miles). Then I have a calculated field that basically just multiplies the Mileage field times two to get total mileage to and from my house to vendor location. (Total Miles) {The reason I want to do this this way right now is because I didn't keep up with my mileage this year and I am having to look up the distance from my home to each location)
Then I have a "supplies" table where I show the date, the vendor, the item, cost, etc, and I want to add a Total Mileage field based on the calculated Total Miles field in the Vendors table that will automatically populate based on the vendor of each transaction. I just can't remember how to make this work and I know just enough SQL to be dangerous.
I Have a table with 15000 entries. This table lists components we use. This table is used to generate queries/forms. I have been asked to add a hyperlink to this table to link to a drawing of the component. All the drawings are in PDF and in the same folder. I am looking for a way to automatically update the hyperlink fields all at once. The Hyperlink will be in the format of servershareddrawings12345.pdfwhere 12345 is the component name from the table.
But there are a few small problems with the component names.
1. If the component begins with a B- . The drawing name will be all the characters except when there is a second dash in the component. So if the component is B-12345-678 the drawing name will only be B-12345.
2. If The component begins with AB, The drawing will be the first 5 characters regardless of what follows, e.g. AB123.
3. Finally for all other components the full component name will be the drawing name.
Putting the naming to one side, how to go about auto generating the hyperlink. I have posted this in the table section, but maybe this should be in another section like queries or VBA.
I would like to put a date in a form the region and then a staff code and based on the three entries then auto populate the remaining cells if those three have been entered together previously. Is this possible?
View 3 Replies View RelatedI am having a table for invoicing and vouchers, and I need to have two fields that will have auto incremental numbers. How I can have two fields in the same table with autonumbers and how can I get one of them to start from a different value.
Eg. Record 1 - [inv No] 1 [Vno] 0005
Record 2 - [Inv No] 2 [Vno] 0006
My friend is looking for the database to auto populate a date, based on information already entered.
A Learner Starts his/her private tuition lessons on dd/mm/yyyy and pays for 6 weeks, the next lot of payments is due on dd/mm/yyyy...
Hi, I have the following structure:
Products 1-M ORDER DETAILS M-1 ORDERS M-1 CUSTOMERS
I have ORDER DETAILS set as a junction table so that many products can be recorded within one order. All is good apart from when i go into ORDERS and create a new order. I click the subform which links to the ORDERDETAILS. I then pick a product number(look up from products table). The problem is this: In the ORDER DETAILS I want to display the unit price of this product simply by picking the product id.
Eventually this would form the basis of an order form where I can pick Product Id and have it display unit price.
Any ideas on this one, I'm sure its quite simple!!
Thanks in advance
Attached is my many to many relationship setup. I would like to prevent the possibility of entering the same person more than once for the same training event. I am assuming that I do this by setting an index setting for a field the junction table?
View 3 Replies View RelatedI am trying to auto populate a text box when i click on the button to add a new record. This is the code for the addnewsequence button.
Private Sub addnewsequence_Click()
On Error GoTo Err_addnewsequence_Click
DoCmd.GoToRecord , , acNewRec
Exit_addnewsequence_Click:
Exit Sub
Err_addnewsequence_Click:
MsgBox Err.Description
Resume Exit_addnewsequence_Click
End Sub
In this form is a text box called degree name that is link from the table degree. It autopopulates with the degree upon the sequence form first opening button clears the text box when i click add new sequence
any help greatly appreciated...
Thank you