Hi,
When the user clicks on the file name, I want the form to load automatically & also at the same time minimize the database window (i.e. the window where all the tables, queries etc are listed). Any suggestions?
Thx in advance,
Jatz
A form that used to automatically open when the db was launched has been deleted. However, the instruction to load the form is still in the db. I would like to remove that instruction, but I can't seem to find where to look for that code. In Access 2007, I went on DB to the Database tool menu, but its not in the switchboard manager.
View 3 Replies View RelatedI am having a hard time with this project that I'm working on at the moment.
I have created a modal dialogue form that has a macro set to open another form and close the current form at the same time. The form that is being opened has textbox controls that have the default value set to hold the data that is in the textbox controls in the modal dialogue form that is closing. The problem is, is that when the modal closes, the controls in the next form display #Name? and the data is not copied to the next form.
I have a database that has a main form, and from that main form there are buttons that open their respected forms. I am curious as to how I control the size of all of my forms. They are all pop-ups at the moment. It all works fine on my monitor, but when opened on a smaller monitor it is too big and I can't even see the bottom of the screen. The main form is set to open automatically after the user logs into the database and it opens to fit the screen. also, all of my forms are modals.
View 4 Replies View RelatedHow can I get a form to open when the database opens?
View 5 Replies View RelatedI have a User Main Menu as seen below with the command buttons for New Work Log Entry and Edit Work Log Entry. The New Work Log entry opens a blank Work Log as shown below. The Work Log form's record source is tblWorkLog. The user will fill out all the fields except the End Page and Total Worked Pages. The user will then exit out of the database. When ready to enter the total worked pages the user log back in to the db and will click on the Edit Work Log Entry.
This is supposed to open up the last entry the current user was working on so that he or she can enter the End Page and Total Worked Pages
Currently it is opening up the last entry of the table even if it was a different user's.
How can I change this? I need it where it opens up the last record for that person. There are going to be 50 users so I can't have it open up to the last record of the table.
Any help will be apppreciated.
http://img.photobucket.com/albums/v332/youmnac/UserMenu.jpg
http://img.photobucket.com/albums/v332/youmnac/WorkLog.jpg
I am sure this has come up a thousand times and I searched but could find nothing about this. I have a database with one main form and many queries. When the database is opened by users I would like for only the form to show. I do have queries in a dropdown list on the form to run. Basically, I only want the form to show when the database is open but I want to be able to get to the menu's etc when I need to.
Please help.
I need to load my Default Form at start up of my database while office button,the Ribbon and the Navigation pane will be hidden. And when i go to form design view then i can use the ribbon and navigation pane.
View 2 Replies View RelatedI have a FE DB that I have been opening and closing at various times without incident. Now all of a sudden it only opens as READ ONLY. I can't find anyone with a BE open that might be causing this. What will cause this? If I save a copy and then replace the original will I lose my data?
View 6 Replies View RelatedHi,
I've been given an existing database to modify, and I'm struggling somewhat to see how the author has implemented certain functions.
On a main menu form (autoexecs on starting the database), there are various "Search By" option buttons to generate a report, ordered in various ways. The "On Click" field for each of them refers to a macro, called Buttons, and a line in that macro dependant on the type of search (e.g. OnClick = Buttons.byPerson).
The Buttons macro runs an OpenReport command, the report corresponding to the search type (e.g. Buttons.byPerson has an OpenReport command for the "Report by Person" report).
However, when I click the search buttons (or indeed run the corresponding reports) I instead get another form which allows the search criteria to be specified - this then generates the report (I would assume based on the relevant query - e.g. Person Query), but I cannot understand how this works.
Google searches have not helped much as I can't seem to find an adequate search phrase to use, and I've been staring at the thing for some hours now. Any help getting me off in the right direction would be much appreciated!
I have created and saved a form in access automatically from database table. But when I change Display Control of a field from text box to combo box,it is not reflected in the form automatically after I refresh the form.
View 1 Replies View RelatedI have a split database with multiple users. Since I split the database, it runs slower than the unsplit version. I understand this happens. I would like to have a message pop up when the database is loading. It takes approx 2 mins to load. Users get impatient and start clicking. So, I wanted to have a message pop up to let them know it is opening.
I have the same problem with forms loading, I have 5 forms and each takes about 4 secs to load, so thought about a loading message there too.
I have a database which seems to open many copies when it is accessed over the internet (via ASP) but If I open it on my compter over my LAN then it seems to open 'exclusive' and those on the Internet get the error message that 'file is already in use'.
Is there a way of opening the database over the LAN and allowing the Internet to see it?
I am attempting to create a patient tracking database for a clinic I work in and I am stuck at one small but major part.
I have a parent form called frm_Patient_index. On this form you can enter patient details such as personal details, observations ect. I need to create a lab request form for certain tests to be performed.
I want so that a button on the frm_patient_index form opens a subform where the relevent tests can be requested via tick boxes. Now here is my problem I have managed to create all of that except for the information to be entered into the frm_lab_request automatically and get SAVED to its corresponding table. It will not save for me.
I can get the information such as Badge Number, First Name, Surname and DOB to all enter into the fields automatically but getting them to save to the table is not happening.
We have a database on a PC located on our network. The database is located in this computer's shared folder. Another database grabs data from this database occasionally. We're running into a problem where we cannot open the DB located in the shared folder (permissions granted) without it being a read only instance even with no users accessing the DB.
View 6 Replies View RelatedI have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
I am new to Access, but have an urgent need. I want to have certain fields (Yes/No type) to be selected based on a certain field (also a Yes/No) being selected.
It's very straight forward. Select West Coast, and the states CA, OR, and WA are selected. De-Select West Coast and the states CA, OR and WA are deselected.
Any thoughts? thanks in advance.
Warren
i have a database that users log into before they can do anything, after they log in, when they open up a form, i want the username that was used to log in to be displayed and stored in a field. how would i do that?
Here are the relevant fields and tables
Name ---------------------- Description
USERS --------------------- contains username/password/success/date time for login
Login ---------------------- Login form
Username ------------------ Username field in 'Login'
Password ------------------ Password field in 'Login'
EXPOSURE_REPORT --------- Table that contains information for form VV
EXPOSURE_REPORT --------- Form
REPORTRECIEVEDBY -------- field that needs the current user stored in it
there are 6 or 7 users total, if that's at all relevant,
thanks!
I have an Assess 2007 database with a user table. This table holds database user names and user passwords an entry permission to the database. I also have a welcome form that activates when user enters the database using either of the user names and user password in the user table. Now, I would like to display the database user name (NOT THE SYSTEM USER NAME] on the welcome form of the user that enters the database.
View 14 Replies View RelatedI need to know the procedure or event code for user login form at opening.
I am working on database which is almost done and i defined tables for users with passwords.
I need to know how i can assign Login Form to be appear on opening of database no other person than listed users should be able to enter or open database without password, to enforce this i made a login form.
I have a 2007 back-end db on a network share and around 15 regular users who access it through their own front-end db/interface. One user on Windows 7 is able to launch and use his front-end copy fine except when he goes to launch one form for data entry.
This form clocks and freezes the entire application. I sat with him and was able to determine that the issue is that the form_load code is never running. He clicks on the button to launch the form (done in vba) and the code never runs. If he opens the form in design view first then changes to form view, the code runs fine and there are no issues. This is his present work-around, but I had to give him an unlocked FE copy to pull it off (not ideal!).
I tried this with him on different PCs, with different front-end copies, and even in the back-end copy. Same result each time. None of the other users have this issue, and he can replicate this issue on different PCs. I'm at a loss for what might be causing this since it really seems so user-specific.
Hi all,
I encountered some weird symptons with my Access forms. I am using the form to display images(done by setting the OnCurrent and After Update property).
When my PC is just powered on, and i try to load say form "ENGLISH". Form "ENGLISH" will appear, but the focus will switch in between form ENGLISH and the MS ACCESS program window. This action will onli settle down after abt 10 secs.
When the ENGLISH form is loaded, i will attempt to switch from one record to another, but the same thing occurs again. IT will load/refresh for abt 10seconds, with the focus toggling btwn ENGLISH FORM n MS Access.. IN addition, it opens a second copy of FORM "ENGLISH" in the background as can be seen on my taskbar. When i close my 1st form ENGLISH and i attempt to close the 2nd FORM tat is appearing on the taskbar, there will be an error msg, English : MSACCESS.EXE-Application Error, Instruction at....(refer to the attached jpeg file for detailed error location)
Y is it tat this weird behaviour onli applies to the forms tat are used to display images but not those normal forms tat contains of purely text?
The entire behaviour will be eliminated after i close MS access, and reload the DB abt twice.....
Hello All
I have a list box that displays the names of customers who are allowed to hire DVDs.
I would like to highlight a customer and show all the relevant customer data on a separate form, not have the list box on the same form that displays the customer's data.
Regards
Terence
London
Hi.
I am running a form on top of a query with around 1500 records in it. The query mostly uses tables that are joined with referential integrity.
The form has buttons and conditional formatting.
It was fine until today, when suddenly the form has stopped loading properly. It looks all fragmented on the screen and I have to scroll down and scroll back up again for it to look right.
I have searched everywhere to find out what is causing this and how it can be fixed, but no luck yet. Can you help?
Thanks.
We have access DB on a server accessed by 3 workstations. When we open the shortcut it opens a form. Few days ago we started getting this error: can't find project or library..Then this code opens in Microsoft Visual Basic
Code:
Function CheckCommandLine()
If Command <> "" Then
changeTableLinks Command
End If
[code]...
Link to the database is like this:"C:Program FilesOFFICE11MSACCESS.EXE" serverdbsci.mdb /cmd serverdbsci_data.mdb....We don't get this error on Access 2007.
I have a table called tbl_post_staff, within this table I have an id number (autonumber), user id (text) and user full name(text). Then I have a form called ec_main with a combobox linked to tbl_post_staff, but stores its value in a field called officer_is in a table called tbl_extensions. also on the ec_main form is a text box that displays current user.
What I am trying to do is; on my form ec_main; default the combobox (Called officeris) to the staff full name based on there userid that is logged in. how can I do this?