Average, Mean, And Mode
Aug 24, 2007Hi guys,
I know I can average data in Access, but is there a way to do mean and mode? As always, thanks all...
Caliboi
Hi guys,
I know I can average data in Access, but is there a way to do mean and mode? As always, thanks all...
Caliboi
I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
View 3 Replies View RelatedHi guys!!!!
I try to find an answer in the forum about "Average Fields",but ican't
I am confused:(
I wan't to export Avg Of the fields like in the panel below:
Hello all,
Has anybody ever encountered this before. I can't seem to get rid of it.
When logging in to my Acc 2003 db I get a message along the lines of...
"Access failed to start correctly last time. Starting access in safe mode will help isolate a startup problem. Do you want to open in Safe Mode?"
When selecting No, it allows me in as normal.
This happens everytime I log in now. Even when choosing Yes then exiting the db.
Anybody know where to start looking for the solution?
Thanks
Kempes
Hi,
I found a couple of short threads on the forum discussing the above. None of them go sufficiently far enough into detal to help me solve my (relatively simple) problem.
My boss has asked me to produce both mean and mode calculations for the number of pallets we ship to our branches on the 30+ routes that we service.
So far I have managed to implement mean but mode seems to have me stumped.
I'm aware there actually isn't a mode function in Access as such but like mode, is there a way to calculate the most frequent occurrence of a number over a time period?
My query is already producing Min, Max, Sum (and now mean) results for the pallets we ship, can someone offer me help on this?
All the code that I have retrieved so far seems to be based on something similar to this:
select top 1 with ties your_column
from your_table
group by your_column
order by count(*) desc
I have very little to no idea about how to implement this into my query. Any help would be appreciated.
Thanks In Advance.
sausagefingers
I have a query that finds an average. How can I get the average to only show two numbers after the decimal?
View 4 Replies View RelatedI apologise for my ignorance, but I’m very new to Access.
I have a database of dates, that I need to analyse.
I have created a Form called "DateRange" with 2 date fields;
Text1 = Date From
Text2 = Date to
Command1 = Preview Report
My Query has 2 fields;
Slotdate = all the dates (show as 20051210)
Actdur = Actual Duration (show as numbers 1 or 12 or -3 etc)
The SQL View is;
SELECT slotapp.slotdate, slotapp.actdur
FROM slotapp
WHERE (((slotapp.slotdate) Between [Forms]![DateRange]![Text1] And [Forms]![DateRange]![Text2]));
I just want to calculate an average of Actual Duration
So that my report displays the average duration between the date ranges.
Any assistance in this matter would be greatly appreciated
I've looked thru a lot of posts, but can't seem to find the solution. It seems like this should be something I could figure out, but so far have not.
I have a table that is showing a production number for each day. What I'm trying to show is the best 5 day average production over a period of time.
Thanks,
Tom
Could someone please tell me how to work out the age of someone using a query or report and the average age of everyone?? I also need to know how to put on a report the total number of people satisfying the search criteria. It also says i must obtain a single record for each person and to do this i need to change a query property to allow only unique records to be displayed? do u know what this property is??
Please help!!
Thank You
It's been a while since I've been on the boards. Good to see lots of the same folks are still here. :D
I've got an interesting problem. I have a sub that calls another sub. Pretty simple there. The problem is that when sub A calls sub B, sub B does not appear to run. This is all sub B does:If Not IsNull(Me.txtNumber) Then
Me.txtNumber = Me.txtNumber + 1
End If
The weird thing is, sub B runs just fine if I run the sub B in step mode. If I set a break point and use F8 to step through the code line-by-line, it runs just fine. If I take out the breakpoint, the code no longer works.
Anybody have any ideas? I'm running Access XP Sp2 on Windows XP SP1. Thanks.
I have a form that is locked unless they click the command button to edit records. I want a msg box that when they click the close button it pops up with something like save edits? Just as an extra precaution. But I only want the message box to pop up if the form is in edit mode. Is this possible? And I would like to be able to have them click ok or cancel in the message box
Here is the code for the close button:
Private Sub Close_Click()
On Error GoTo Err_Close_Click
DoCmd.Close
Exit_Close_Click:
Exit Sub
Err_Close_Click:
MsgBox Err.Description
Resume Exit_Close_Click
End Sub
Thanks
Tracy
Hi All,
This is such a newbie question I realise, but I have a form (frmFOBEntry) with a combobox (cboMarketCode) which returns a list from tblMarketCode.
New records are added to tblMarketCode using a form frmMarketCode
When I look through the combobox on the first form if the MarketCode I want is not there I want to be able to click a button which will open frmMarketCode in add mode.
Have looked through the forum and found all manner of flash ways to open on to certain records and the like, but nothing that simply opens the form so you can add a new record.
Also, if I add a record will the combobox update automatically?
Many thanks
I have an old db. I would like to see the forms and tables so I can select them and make changes. I know there is a way to access those items on startup but I have forgotten how. When I bring up the db I see a form and I can get into VB for that form but I cannot see any embedded table, forms reports, etc.
View 3 Replies View RelatedI trying to set my access database as a single user mode.(If i using the Mdb , other user cant use the same mdb by showing some warning msg and close ).
View 3 Replies View RelatedIs there any way i can calculate a rolling average for a field in a record, based on the 10 previous records?
Cheers,
Ben
I have a customer concerns database that contains the dates for when the concerns were reported and tyhe dates for when the concerns were resolved. I am trying to make a query that finds the average of how long it takes for the concerns to be resolved. How can I do this?
View 1 Replies View RelatedHi,
I'm trying to create a query that returns 10-min average wind speed.
I have the logging date,time and the wind speed per second in the wind log table.
Date and Time Wind Speed(mph)
28/04/2006 2:17:01 PM 10.5
28/04/2006 2:17:02 PM 10.6
28/04/2006 2:17:03 PM 10
...
And I would like something like this from the query:
Date and Time Wind Speed Ave
28/04/2006 2:17:00 PM 10
28/04/2006 2:18:00 PM 7
28/04/2006 2:19:00 PM 5
......
Thx,
1.8T
i have a date field with time and date each record is entered. results look like this
Date_Complete
4/9/2007 8:26:11 AM
4/9/2007 8:31:25 AM
4/9/2007 8:34:14 AM
4/9/2007 8:34:21 AM
4/9/2007 8:34:29 AM
4/9/2007 8:34:36 AM
4/9/2007 8:34:49 AM
4/9/2007 8:41:27 AM
4/9/2007 8:41:49 AM
4/9/2007 8:42:32 AM
4/9/2007 8:42:39 AM
4/9/2007 8:42:49 AM
4/9/2007 8:43:36 AM
4/9/2007 8:44:21 AM
4/9/2007 8:45:48 AM
I want a query or report to give me the average entry time per record. Something like: Average time between orders 1:25 (one minute twenty five seconds)
I want to create a running or moving average of the most recent 5.
can anyone help here?
see attached file
Mix IDTest Date 7 Day1 Avg of 5Ave 28 Day
SF227
2/1/2007 3870
2/1/2007 2160 5415
2/7/2007 3580 5505
2/7/2007 3510 4955
2/12/2007 2990 32204965
2/19/2007 2800 30085500
2/19/2007 3330 32424920
I need to make a query which counts the number of days between "Date of Complaint" and "Effective Date". This is what I have so far:
[SELECT [Customer Complaint Log].[Complaint Number], DateDiff("d",[Date of Complaint],[Effective Date]) AS Expr1
FROM [Customer Complaint Log]
WHERE ((([Customer Complaint Log].[Effective Date]) Is Not Null) AND (([Customer Complaint Log].[Date of Complaint]) Is Not Null));
I need to make it so that it uses todays date for "Effective Date" if there is no "Effective Date". Any help would be appreciated. Thanks.
I am running a query that returns the minimum, maximum, and average mileage of a list of cars. I have set decimal places to zero in all places I can think of, but of course the average returns with a long decimal output. These figures are then displayed on a report.
How can I truncate the 'average' display so it rounds to show no decimals?
I have tried using Round([YourNumberFieldName],3) in the query but that doesn't seem to work.
The numbers are stored in a table as double numbers. Again the decimal places are set to 0.
Thanks.
I have a file with hundreds of home builders. It has three fields for this problem.
Table = Permit
field = Per_date (Date Field) Date BLD record appears in table.
field = BLD (Char) Builder number or Name
field = SQFTArea (N) Size of home.
1. I need to be able to get the average for (SQFTArea) for all records greater than 950 (SQFTArea).
2. For year 2007.
3. Grouped by Builder (BLD).
Example: Per_date - BLD - SQFTArea
Record: 2006 - 012 - 0500 Not becouse of 2006 and 0500
Record: 2007 - 012 - 2500
Record: 2007 - 012 - 3500
Record: 2007 - 058 - 2000 Not becose of BLD=058
Answer is for 2007 BLD 012 has an average of 3000
BLD 058 would be figured with it's self at average=2000 if the only record with this number or used with any other records that are BLD 058.
I have asked for help in the past but must likely my examples not that great. Here’s hopping. Hopping?? I hope I got that right being as I'm not a rabbit. Spell checker no help on this one.
Bob
First of all I consider myself to have Intermediate knowledge of Access. I am comfortable building tables, queries, reports, macros, etc. but get a little lost when needing to manually code something in a query.
I need to create a database to document quality reviews of certain reports the plant creates. Typically each report gets reviewed by 2 to 6 people and each section is scored. So lets say the database table has the following fields
Report_No
Reviewer_Name
Review_Date
Section1_Score
Section2_Score
Section3_Score
Total_Score
I need a query that will average each of the Section Scores and Total Score so I can build a monthly report showing the report and the average grade for each section and the average total grade.
Any suggestions on how to do this is appreciated.
Thanks,
Jim
I need help with a calculation in my form. I have a form named families. IN this form I have 12 check box's, one for each month. I would like to set up another box which would take the average of the past 3 months and tell me what percentage of the time the box is checked. For example, since it is december, I would like a box named quarterly average to look at the past 3 months, obviously september, october and november, and tell me in percentages what the percentage is that the past 3 months check boxes have been checked. This is the basic code which I created for my unbounded box, but I want it to be dynamic, so that it recognizes what the month is today and tells me automatically what the percentage is.
Control sourceis set to =Abs(([Sep]+[Oct]+[Nov])/(3))
Thanks,
Tim
Good day,
I am looking to calculate a simple average of two numbers when my form loads(It appears to be a basic concept, but I cannot figure it out). I have tried to build an expression but this didn't show any value. =([score1] + [score2])/2
I have attached my db to view my problem. I am wondering if anyone can assist me with this.
Thanks
I have a database which seems to open many copies when it is accessed over the internet (via ASP) but If I open it on my compter over my LAN then it seems to open 'exclusive' and those on the Internet get the error message that 'file is already in use'.
Is there a way of opening the database over the LAN and allowing the Internet to see it?