HELP
When the user double clicks on the icon, the form automatically appears on the screen. That's good. But record number 1 is there. I want a blank record there so they can enter their data. This can't be difficult, but I can't figure it out.
Hi,
I have a form which is based on a table.
I was wondering if it is possible that when the form is opened a blank record could be displayed rather than the first entry in the table. In other words, it would be like opening a form and clicking the "Add Record" button, a blank record would be displayed and data entry could take place.
Any thoughts/ideas would be much appreciated.
Thanks in advance
Turbojohn
I have the following module in my database to allow for multiple alarms.
It all works great, except before showing the actual alarm record called, the form first pops up showing the first record in its record source.
I.e. it flashes up showing the first record in the table, then changes to the 'correct' record.
I would just like to change it so it either doesn't show until the record is loaded, or it shows blank to begin with.
Here's the module...
Code:
Option Compare Database
Option Explicit
Public clnPopUpAlarm As New Collection 'Instances of frmPopUpAlarm
[Code].....
I was reading some other posts and someone said they got their Forms to Open ready to accept data, just curious how to go about this...
View 4 Replies View Relatedmmm the problem i get is that if i set data entry to yes it hides all my records :s any reason why this would happen? im using access 2000 btw.
View 5 Replies View RelatedHow can i open a form to add a new entry in a blank format. I currently have a button which opens a form but displays the information of previous entries.
I would really like the form to open without displaying any previous entry
Hello guys
How can get blank fields on opening or loading my form?. I don't want to prevent data entry option.
Please help me
Thanks:)
I have a button that opens a form based on a query, the query is filtered based on an input field. This works great except when the user typos what they put into the input field. Since the query pulls no records it just opens a blank form. I want it to not open the form and instead open a message box telling the user the data they entered is not valid and to try again.
View 1 Replies View RelatedIn the Purchase Order details form a Supplier has to be chosen via a combo box. Based on that another combo box in the subform displays products only from this supplier (Products table is linked to supplier table).
I managed to let the subform combo show only relevant products using criteria referring to the main form combo box. Also other product data will show accordingly in text boxes. So far so good.
However when I close the form and reopen it the subform combo box is blank, other text boxes still show the right values. If I remove the filter criteria for the subform combo then all fields show all data correctly. (However the combo box is unfiltered again 8-/)
So somehow the 'criteria' prevents the combo to show the value that was previously chosen.
I created a search form that searches for Customer Number, Part Number, and Revision Number. The results are displayed in a List Box.
I want the user to be able to make a selection on the List Box and click an "Open Selected" button that launches that record in another form. How is this possible?
I have a form with a drop down of employee names and a tabbed subform.
I have the form and subform set up to open on a new record and, when the employee name is selected to fill the subform with that employee's data.
It is a split db with the be on the network server and everyone has their own copy of the fe. When I open the front end the combo box is blank but the first page on the tabbed subform shows data. If I close it and reopen it, sometimes its blank and other times it still shows data.
What else do I need to do to ensure that it is a blank record?
Also, I am using the MouseHook.dll and included it in my .exe (zip) file to all of my users, instructing it to download to the same location as the .mdb file (C:/Training Database). Will this work or does the MouseHook.dll need to be somewhere else?
Thanks,
Toni
i have a subform as a continuous form, and at the bottom, there is the normal blank record (created automatically), to enter a new record. Is it possible to attach a piece of code to a field but which will be available only to the field of this blank record, rather than being available for the particular field of all the records in this continuous form ?
Basically i want that if the focus is on this blank record, and i will hit the tab key i want to move the focus to a control, on the main form, that's why i want it specifically, when only this blank record at the end has the focus.
Thank you for any suggestions.
I have a form that is used to both Enter & Edit records. There is a "search" button to aid in finding records.
I have been asked to have the form open to a blank record instead of the first record in the table.
Is there a way to do this without setting the "DataEntry" property to true, as this basiclly disables the "search" button.
Thanks
Another Simple one From jeff.
Upon opening a form how do you get it to open to a new record rather hen the first record. Thanks All. Jeff
looking for help again!!
i am trying to switch between 2 forms using a command button..
i have 2 things i am trying to achieve
i want the form to open up at a new record as at the moment it seems to be opening at the last record created.. i have tried to use an open form function for new records but that doesnt seem to work.
secondly i have tried to use the code below to go to the next record then close the form and open a new one...
DoCmd.GoToRecord , , acNewRec
DoCmd.Close
DoCmd.OpenForm ("Welcome Page")
but so far all it does is open the new form it doesnt go on to the new record in the current one!!!
hope it makes sense
cheers
si
looking for help again!!
i am trying to switch between 2 forms using a command button..
i have 2 things i am trying to achieve
i want the form to open up at a new record as at the moment it seems to be opening at the last record created.. i have tried to use an open form function for new records but that doesnt seem to work.
secondly i have tried to use the code below to go to the next record then close the form and open a new one...
DoCmd.GoToRecord , , acNewRec
DoCmd.Close
DoCmd.OpenForm ("Welcome Page")
but so far all it does is open the new form it doesnt go on to the new record in the current one!!!
hope it makes sense
cheers
si
I have a switchboard form that opens with the database. One of the buttons on it opens up a standard form for entering names and addresses.
I created the button with the button wizard, so the standard code:
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Enter Details"
DoCmd.OpenForm stDocName, , , stLinkCriteria
However, this opens the form with record 1 loaded. There is a danger that someone might accidentally enter data over that, so I would like it to open up to a blank record (at the moment, users have to know to press the ">*" button). How can I do this?
Thanks in advance for any help... and for putting up with me of late! ;)
I have a statistical program and the user constantly use the form to check calculations and get out without saving a record. In order to allow this with out writing to the table I used unbound fields and an accept and close command buttons.
This worked well until I added a subform to one of the forms. Now, if I just open that form and then click the close button, I get a blank record in the table associated to the main form. Is there a way to stop this?
I have a form linked to an employees table. I have a search function on this form which allows you to search for a particular employee.
At the moment when i open my form, it always displays the first record!
How can I make my form open with blank fields instead of the first record showing?
Thanks alot.
Regards,
Amber
How can I force a form to open at "New (Blank) Record"? What I want is when a person opens the database it will take them to a default form (I have figured this part out already) but at the "New (Blank) Record".
View 1 Replies View RelatedI have code that is executed with the click of a button to enter a new response using 2 fields to differentiate the records: a combobox "cboSrvID" and a textbox "RspnsName". I have a different set of questions for each value in the cboSrvID. Upon selecting my button the record is saved correctly although I would like it to open the blank form associated on the subform "sfrmSurveyResponses" when pushed. I have tried some DoCmd.FindRecord and DoCmd. GoTo functions to try and retrieve the last acLast RspnsID inputted. So far I have had no luck.
Below is the code for the onClick action of my button.
Code:
Private Sub cmdEnterResults_Click()
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
DoCmd.SetWarnings False
DoCmd.OpenQuery "qappNewResponses"
Me![sfrmResponses].Requery
End Sub
hello,
I have form "QUOTE" (which has a check box "GenerateOrder") and form "WORK_ORDER". Once I click on "GenerateOrder", I want form "WORK_ORDER" to open, and I want to assign a value from a txtBox in form "QUOTE" to another txtBox in form "WORK_ORDER" creating in this way a new record on form "WORK_ORDER". I want to make clear that as soon as the value is passed or assigned to the txtBox in form "WORK_ORDER", a new record for this form should be created.
I tried this code:
Private Sub GenerateOrder_Click()
If (Me.GenerateOrder.Value = True) Then
DoCmd.OpenForm (WORK_ORDER)
[Forms]![WORK_ORDER]![QID] = [Forms]![QUOTE]![QID] 'assignment
End If
End Sub
but it doesn't work
Thank you very much
I would like to create the following functionality on a form in my database:
When the form is open, and a record is displayed on the screen, I want to add a button that will open up a second form displaying information related to that record.
To be specific, I have a form called "Contracts". Each contract record contains a customer name in the field "Customers." I want to create a button labeled "Customer Details" that will open a new form, "ViewCustomers" displaying the record associated with the value entered in the "Customers" field for the current (displayed) record only.
I have been trying to use a hyperlink to a macro that uses "OpenForm," form name "ViewCustomers," but I don't know how to filter it down to just the current record.
I hope any of this makes sense. Any insight would be really helpful.
Thanks! -Matt
Hi all
Im currently designing one of my first databases!
I've initiated a log on procedure, with a password.
A user enters their ID and password. Once the correct password is entered, the next form is then loaded up, to which they make some choices.
My problem is that I have lots of users, and I would like them to only access the page that is relevant to themse, and NOT be able to see anyone elses.
I gather there is a little bit of tweaking to go on the
docmd.openform...
line, and somehow incorporate the userID, but not entirely too sure what it is.
Apologies if this seems really easy!
All help appreciated - many thanks!
Guys
I've searched the database and found similar problems but don't understand the replies (mainly DCount()).
I have a control form where a user can search the database by entering information. The form asks them to type some text that will appear in a description field, and match any records with the same text.
However, when the user types the text and clicks the button to open the form (which is linked to a query searching the description field), I want a message box to say no records found before opening the form. Mainly because when it doesn't find a matching record, the form opens with a new autonumber.
I either want a matching record to appear, or a dialog box saying no matching records found and the form not opening therefore not creating a number that is not used.
I tried in the command button entering if recordcount>0 then openform but it doesn't like the else statement or doing a if recordcount=0 underneath.
Any ideas?
Hi,
I am opening a form, from another form, that is based on a table of 20000 records.
I am using the WHERE criteria to do this, code is included below. I need to provide database access to several users on a network (and only want to lock the record that the user has searched for), and was wondering if this mode of data access will lload and or lock all 20 000 records on the users sytem, or if it will just load and lock the specific record that has been opened using the WHERE condition to open the form...
Advice appreciated.
Regards
Mack
--------
CODE
--------
stDocName = "frmCONTACT"
stLinkCriteria = "[contactID]=" & Me![ContactID]
DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria
End Sub