Both Text And Icon On A Command Button
Feb 2, 2006How do you make both the text and the icon visible on a command button? If the 'Picture' propery is set, I can't see the text.
View Replies
ADVERTISEMENT
Changing Command Button Text Colour.
Jun 30, 2006Hi all,
I'd like to change the colour of the text in a command button when the user click the button, but for the text to return to it's original colour when the botton pops back up.
I'm assuming you use the following commands:
Private Sub cmdClose_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
*******CODE********
End Sub
Private Sub cmdClose_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
*******CODE********
End Sub
But I'm not sure as to how I would enter the correct code.
Any help would be appreciated,
Best Regards,
Aaron
Command Button To Add Current Date Into Text Box
Jul 21, 2006I need to create a command button that simply, when pressed places todays Date into a text box, the text box should have no value in untill the command button is pressed.
Thanks in advance for any help i receive
Lee Pemberton
Command Button Text Bold When Onfocus
Oct 1, 2004When a command button is onfocus, how do I make it bold or a different color and when it's not onfocus to return to it's default format? I know that this is possible with text boxes but I don't know how to do it with command buttons.
Please help. Thank you!
How To Input Text Via Dedicated Command Button
Sep 20, 2011I have 2 text boxes and 1 push button for each text box for input to table. When I click on 'SaveInput1' only Input1 is save onto the Table and when 'SaveInput2' is click only Input2 is save. I want each command button to save each input separately.
I know ACCESS have a SAVE RECORD function, but I do not want to use this because it will save the entire record all at once.
TextBox1 = Input1
TextBox2 = Input2
Commandbutton1 = SaveInput1
Commandbutton2 = SaveInput2
Command Button To Change Font In Text Field
Dec 2, 2004I would like to make a command button to change the font in a text field on a form.
Can any one give me an example of the code that I would use to do this? I would greatly appriciat it.
General :: Sending Text Via Command Button To Email
Mar 19, 2014After inputting data into a text box on a form i want to click on a command button which will open an email program and then put the text there so i can send it.
View 1 Replies View RelatedForms :: Filter Form With Two Text Boxes / Command Button?
Mar 22, 2013I am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:
Bound Field: MondayD1
Unbound text box: txtMonday
Bound Field: SundayD7
Unbound text box: txtSunday
Command Button: cmdSelect
MondayD1 = txtMonday
SundayD7 = txtSunday
I have looked up several options using vb for the on click event of the command button but I either get an error message or the form shows up blank.
Modules & VBA :: Command Button Press Multiple Times Based On Value In Text Box
Jul 23, 2015Is there any way to press a command button a certain amount of times based on a value in a text box.
i.e.
text box value = 5
button gets pressed 5 times with one click...
How To Create A Specific Search Page And Connect A Text Box To A Command Button
Mar 19, 2012I haven't used access before and have been set the task to create a data of photos. The table is called 'Find a Photo' and contains 6 catergories of various information including river, site and date. I would like to create a search/command button by which i can type the river, site and date into seperate text boxes and search all of them at the same time.I don't know how to connect a command button to command button and not sure if any macros/queries are needed. Hope all this aint to hard to do.
View 1 Replies View RelatedTables :: Command Button On Form To Run Text File Import Into Table Wizard?
Aug 28, 2014Is it possible to have a command button on a form to run the Text File Import Into a Table Wizard?
View 13 Replies View RelatedForms :: Command Button To Populate Unbound Text Boxes From Subform Only Works Once
May 22, 2015I have a tabbed form from which the user can select a contact's record from a subform on the first tab, click a edit command button, and the unbound text boxes on the top of that tab populate. The user can then click the second tab with employment history which has blank unbound text boxes and another subform which is linked by the contact id to the first tab.
The user can select a record in the second tab, click a command button and the text boxes populate no problem. The problem comes when the user changes the contact on the first tab, and then tries to edit a record on the second tab. Then I get a run-time error '-2147352567 (80020009)' saying the value you entered isn't valid for this field. Why it would work the first time by not the second?
Modules & VBA :: Return Folder Directory To Text Box On Forms Record When Click Browse Command Button
Nov 12, 2014I need to return a folders directory to a text box on my forms record called Files_Directory when i click the Browse command button... The folder will have more folders within it along with documents all relivant to the folder selected, hense the need for just the folder directory rather than a file.
View 12 Replies View RelatedForms :: Impossible To Add Custom Icon To Button
May 23, 2015I got an image bitmap that I want to use to customize my button. I got following error pop up."Image Generator" - "search key not found in any record".I'm using access 2013
View 1 Replies View RelatedOpen Form Command Button Fills In Text And Date Fields From Previous Form
Apr 27, 2005I currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate]
Example:
IDPO Date
btnOpnFrm 6543 2/1/05
btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
Forms :: Copying Command Button Appearance Properties To Other Command Buttons
Dec 17, 2013I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies View RelatedForms :: Command Button To Unlock And Lock Fields / Edit Button?
Feb 19, 2014I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Difference Between A Command Button And A 'label' Button
Aug 12, 2005Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
Command Button To Set Value
Apr 20, 2006I have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously)
Closed is a yes/no field in my Order table
OrderID is the primarykey of the table Order
SelectedOrderID is the drop down box.
Any help would be greatly appreciated!
Command Button?
Apr 26, 2005I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
Command Button %
Apr 28, 2005how can i assign a formula to a command button?
also can anyone give me specific advice about calucalating the % of check boxes ticked across multiple records.
thanks in advance
Command Button
May 25, 2005A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click()
' Save the main record if it has not been saved.
If Me.Dirty Then
DoCmd.RunCommand acCmdSave
Me.Recalc
End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then
Dim SQL As String
' Move main record to Grants Activity Archive.
SQL = "Insert into [Grants Activity Archive]" & _
" select * from [Grants] where [New ID]=" '" & Me.ID & "'"
CurrentDb.Execute SQL
Me.Recalc
End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.
How Can I Use One Command Button Only?
Feb 26, 2008Hi all
Can any one correct my attached program to make it works with one command button only please?
Using two buttons make conflict.
Any help will be highly appreciated.
Thank you
vbnt
Command Button
Apr 7, 2006Hi I can't seem to be able to find any option to open a table from the command button wizard how is this possible. Thanks
View 2 Replies View RelatedCommand Button
Apr 20, 2006Hi,
How can I make command button on my DAP to use update query that I wrote? :confused:
Command Button Looks...
Mar 2, 2005Hi everyone,
This is perhaps a simple question for which I have not been able to find an answer to. I've been trying to create a form which contain command buttons, but the problem is that the look of these buttons are not similar to those found in Windows XP.
I know it’s purely cosmetic :cool: - but how do I make my buttons in Access 2003 to look like those on my Windows XP?
I've seen some samples here on these forums which have the 'XP' look. Any hints on how to do this would be greatly appreciated.
All the best,
Sab.