I want to use a business card scanner, and use the data for my Access 2000 order database. Most card scanners, can send data to Outlook, can you go from Outlook to Access? Any advise would be appreciate it . . . THANKS!:o
View RepliesI'm in the US military. I would like to use the bar code on the back of the military IDs to populate an access database. Can you point me in the right direction as to how to get started?
Thanks in advance
Yep, I'm a newb.
I have a Symbol long range barcode scanner. Works great. I need to drop this in access and have it update as input (without hitting enter every time). I am reading barcodes with serial numbers and part numbers.
Anybody got anything to help?? Pweeease?
Thanks in advance!
RevJohnny
Help!!
Does anyone know where I can obtain a driver for a barcode scanner that has model details:
Metrolgic MS951 KB Wedge
If anyone knows a specific website that has the drive it would be much appriciated if you could post it here.
Many thanks
Regards
Jason_Hyde
OK... Did some searching and posted one question on forms... But still have one important question that has not been answered. First let me say I want to use a scanner connected via USB. ( I need to be able to use this app on a laptop, so keyboard wedge is not possible) Found a quote on a site "TalTech"... Something like that...... This one..
"1) Keyboard Wedge output or USB output
If your bar code scanner has Keyboard Wedge output or USB output you will not need special data collection software. Both these outputs will dump the data right into the foreground application on your PC wherever the cursor is flashing, as if it were being typed in. You do not usually get much control except for the addition of a trailing keystroke, such as an ENTER key, to your data. But these methods are very simple and work fine for many people."
Question is...... Is this true??? Will the USB input directly to the field I want it to?? I just need someone with some experience in this to let me know for sure.
Thanks
Curtis
I have created a form that I would like to search for a barcode by using a scanner as an input device. Does anyone know how to go about doing this?
The form basically holds a subform of textboxes that have barcodes. I want the user to be able to scan a barcode which will then find that barcode in the subform and assign it with a DateOut = Date() ...
I have a table which contains 2 fields. UserID and FullName..Each employee is assigned a barcode (UserID) and what I would like is when they scan their barcode into the form their name comes up. There is a second table containing records of documents and I am hoping that this form will allow an employee to scan their ID, their name comes up, scan a document and the title of the document comes up, there would be a current date box and then that whole transaction is saved as a record in another table. Long story short I want to know who is accessing what records and to have it logged.
View 5 Replies View RelatedThis question is related to a restaurant POS system design. Is there a way to allow a text field in a form to be filled by a scanner only, unless an event is triggered? Rather than using a magnetic strip ones for gift cards, we're thinking of using the bar code version. However, to prevent employees from fraudulently entering the six digit code, the code must be inputted by a scanner. We do also would like to allow user input with keyboard in case scanner malfunctioning, but would require a "manager" login first.
View 3 Replies View RelatedI have scanner (Unitech MS335-1G) and my end goal is to scan a product number bar code on a box into a field on a form. Then from what is scanned into the box run a query on another table that has all the info on the product. Then populate other fields on the form.
View 2 Replies View RelatedDidn't know where to post this one...... But forms seemed logical..... I am doing some experimenting with using a barcodes. I can create them now, no problem. My next step is using a scanner to input to a textbox...... Problem isn't with the forms..... But more with the scanners. I thought if someone has done one of these DB's they might know.
So........ I need a cheap scanner to test with.... Found a few on Ebay. The cheapest being a Symbol- "Hotshot" LS2100-I000.Says it has "DB9" plug. The ebay ad says "comes with NO software". Only thing I am wondering about are drivers. I've read in a couple places claims that this scanner "Needs NO drivers"
So my question is.... Would this scanner work with Access on a Windows XP system? No drivers needed?
Hope this question isn't too "off the subject" But I am dealing with Access and hoping someone has done this.
Thanks
Curtis
Still working on an meeting registration app in Access. I have a Main menu which contains buttons that allow search by Name, Phone Number, or Account Number. We are using barcode scanners if they have a registration card.
Currently I have an account button which pops up a query prompt window and when they scan the code it fills the prompt with their account number and a carriage return, pulling up an account registration form with their info.
What I would like to do is from the main form, if a barcode is scanned, to automatically lauch the account form passing the scanned account number.
I have hp scanner whose twain driver has the option to scanning in the pdf document.
Microsoft WIA 2.0 have save scanned document only to graphical format.
I want automated (on click any button control) to scan multipage document from glass source or ADF to pdf document and attach it to attachment field.
I'm found VB Module for accessing TWAIN compatible scanner but it is call twain software and scan to bmp format with assigned name of file.
Me need it also only use the pdf format .
I am using Access 2003 and there is a from with barcode scanner to update the shipping data. This form has a sub-form which is working perfectly fine and updating data but the barcode scanner assigned with main form stopped working today. I tried different scanner too and different system too but its not working.
View 5 Replies View Related
Is it possible to use a * (Wild Card) in a pop up box for a query?
I read the previous post about pop up boxes for quires and it worked worked great! I created one for my month field
My criteria in my search fieled is a follows:
05-May
06-June
07-July
08-August
etc...
As you can see someone would have to type a 08-August to get the results for August, can a wild card be used? Example 08* would return all of 08-August data. I tried it but it wouldn't return any data.
Any help would be appreciated.
Thanks, Scott
I am creating a inventory database for work. I am trying to get the cursor to jump to the next text box for data entry using a barcode scanner. I have a limit on how many characters there can be in this field but yet even after it is all filled the cursor stays in that same field. I am fairly new to access, especially in code building. Do I use "After Update" under "Event" in the "Property Sheet"?
Capture.PNG
Capture1.PNG
Capture2.PNG
Capture3.PNG
Sorry All,
I have a simple question, how can I tell if my laptop has a wireless network in it. Thanks.
Hi,
I'm in a a lot of trouble. My graphics card has stopped functioning, leaving me with a perfectly good computer that I cannot use.
In order to retrieve the information from the harddisk, I got a cable between this computer and another one.
This is my plan:
When the "blind" computer is started, I will enter the cmd. From there I would like to be able to "share" one of my folders on the small network (ie the two computers). Is there a DOS command for this?
second question:
If I have VNC server installed, will I be able to see the desktop from another computer allthough I can't see it on the blind computer? Does that information go through the graphics card before it is sent over the internet, or after it has arrived in the VNC viewer computer?
Fuga.
Looking at creating a database that looks up records based on a number from a magnetic card. Has anyone ever come across any code that will pull the info from the serial port? I have been looking for 2 days and not able to find anything. I have the card reader but do not have any software to get the info from the serial port and my limted coding does not even come close to what I need. Any help or a push in the right direction would be greatly appreciated.
Thanks,
Matthew
I am using a criteria entry form as the source of parameters for a select query, and I am using IIF statements in the query so that if the user does not want to specify for that particular field, the search still works based on the other parameters specified. Therefore the statement I am using is;
IIf([Forms]![Criteria Form]![Customer Account] Is Not Null,[Forms]![Criteria Form]![Customer Account],[Data]![Customer Account]).
This works.
However for some of the criteria I want to also use wild cards, so that the user can enter just part of the data, and the relevant records will be returned. I understand that wild cards cannot be embedded into the IIF statement above.
I have tried many methods, and trawled the web for ideas, but I cannot get this to work. I either want the user to enter the wild card themselves ie "100*" returning records starting with "100", or for the query to append the wild card itself.
Can someone help please?
How would I make a query find a person like this:
Inputted Data: Smit
Outputted Data: Smith, Smithy etc..
The formula I have entered in the criteria of my query is:
Like [Enter the person's last name]
With this formula, if I type Smith, then the data that comes out is Smith. But if I type in smit or smi, Smith doesnt come out.
Thanks.
Ive read loads of posts about Wildcard searches but am unable to find the answer to my problem. In one of my boxes on my search form the user places in the search criteria value, this can be from A1 - A16 all the way to G16. At the moment i'm using this as my seasrch query:
[Forms]![Search]![BoxNo]
So if I put in C1 then I get all the C1's, great. If I want to wildcard then I put in Like "*" & [Forms]![Search]![BoxNo] &"*", and again it works, this time it call enything with C1 in it i.e C13.
How can I adjust my query to do both, sometimes I only want the exact match othertimes I want to wildcard :confused:
Does anyone know of any software or have any code that would allow to process credit cards.
View 4 Replies View RelatedI need to develope a system that will allow for employees to login and imput their "time card". I found one post on here about something similar, but it didn't give much info. I am very very new to Access so please give info in simple terms or very well explained. I am hoping that I can have a login and password so employees can't access eachothers time card. All it will need to track is
Date
Type of work
Hours
Rate
Comments
I am hoping that this is going to be an easy task, but I need some help. Anyone have any ideas or directions... or even better know where I could just download a template.
Thanks,
Chrissy
I want to create a database that utilizes the user's ID card to authenticate them and tie any changes to their name.If not that way, using their stored information (SSN, or other ID) as a means of creating a username/password. I've never messed with creating different user levels in Access so this is uncharted territory for me.
View 6 Replies View RelatedGood Afternoon All,
I am in need of you help in calculating this. Basically, I don't want the code to count zero. For example, today is 3/19/2008 - Date() should equal = 1 and not zero..
Here's some more examples:[lastfollowup] being 3/18/08
Date() - [LastFollowup] = 2
Here's my code:
DaysOpen: ((DateDiff("d",[LastFollowup],Date(),2))-(Int(DateDiff("d",[LastFollowup],Date(),2)/7))*2)+IIf(Weekday(Date(),2)>5,5-Weekday(Date(),2),0)+IIf(Weekday([LastFollowup],2)=6,1,0)-IIf(Weekday([LastFollowup],2)>Weekday(Date(),2),2,0)
Thank you,
John
I am setting up a Database for my company, we want to do it in our local branch first then hopefully we can role the idea out to the entire company. I have started the database already just setting up the tables I need, I think my Design is slightly off though. I am asking for the forums help if that is okay, okay here is the setup.
Areas Needed:
Employee
Projects
Clients
Employee Area:
Date of Hire
fname
lname
salary
title
timesheets
etc...
Project Area:
project #
project name
client
budget info
etc...
Client Area:
client name
addy
contact info
etc....
Project area is going to be the main hub for everthing else, the project number is the key to the entire database. client will be attached to a project via project number, employees timesheets tracked by project number, invoices printed by project number. timesheets will generate the invoices to the client. You guys get the idea, I hope that some of you guys can help me in the spare time you have.
Again, i am looking for Design assistance, i will post a sketch of my design in a couple.