I currently have a form with a button that once clicked displays a word document,however I have to double click on the button even though the code is on the single click event property.The only line of code is as follows
OLEFile.Action = acOLEActivate
Does any body know how I can get the single click to work ?
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard
I'VE objects in ACC2003 as per following :
Form name : INVOICECreate
Query Name : db_InvoiceSet
Reports :
1st Report : Report_Inv1
2nd Report : Report_Inv2
3rd Report : Report_Inv3
All Reports based on Single db_InvoiceSet due to some cross and different manipulation of data for different office department
So, I need is:
Open All Reports in Print Preview Mode with Single Click of Button in Form INVOICECreate
I have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
Ok if I sound like I do not know what I am talking about, that would be correct. That is why I am asking here.
So I have this form called frm_UserMaintenance
On The form I have a button
I would like to have an OnClick event that will activate one of the dialogue boxes on the tools menu.
Heres the catch. The menu is not visible and i do not want to make it visible. This makes using sendkeys a non option.
Any ideas????
I have a form on which I have a button that I want the user to click after a cetrain field on that form is updated.
I display a little pop-up box saying to make sure that a user clicks on that button.
Is there a way to know that this button was clicked? Is there a way to not proceed with anything else until that button is actually clicked?
Thanks.
Hi,
I have a form with a number of drop-down lists on it and each of these lists is bound to a field in a table.
When I return the results of a search to this form I want to allow users to be able to cycle through the records and change them if they want. However, the changes should only be saved if the user clicks on the "update record button". This button is simply the save record button by the MS Access wizard.
At the moment if they change the value in one of the drop down lists and move onto the next record the change is saved even though the user doesn't click any button. I want to prevent this from happening.
Any ideas on how I might achieve this?
If I prevent "AllowEdits" in the form properties I can't update the form using the "update record button" either.
Many Thanks,
Afternoon people,
Just a query (no pun intended). Is there a way to ping an ip address which is taken from a table and at the click of a button it pings? Bringing up the cmd app to show the results.
Cheers,
Storm1976
Hi all....
I have a list box that I can select mulitple items from - I then click a search button and it runs a query that finds what I am looking for from a table and then displays the results in a subform.
In the subform I can input weights and get a percent....anyhow.
How do I set up a button so that it will print out a report or the report from the subform information that is currently being viewed.
Also, I can already do this by clicking a button on the form and pulling up the installed report program but, you need to input data to get this report.
I kinda want this button to be a "I need it now" type of print option.
Thanks...as always my questions are probably confusing...:D
I was wondering if there is any way to control a user's input in to a form such that data entry does not automatically create a new record. Is there any way to collect all inputs in the text/combo boxes and create the new record only when a button is clicked? Cheers, David.
View 1 Replies View RelatedI have a continuous form that displays all my customers .I want to be able to dble click a customers ID and go to there customer details form.
View 14 Replies View RelatedHi, I want to run a append query and a delete query by clicking a command button.Can anyone help me regarding this?????
Thanks in Advance
Naveen
:confused:
Hi all!
I have this command button whose caption switches from update record to save record with a msgbox verifying if the person really wants to take this action. On click the user is then allowed to update the record then in theory they would be able to hit the same button whose caption now reads save record, the msg box would appear with a yes or no answer required. The code I have is putting the msg box after the user clicks the update button.
Anyhelp and/or suggestions would be most appreciated!
Private Sub cmdOpen3_Click()
stDocName = "frmSearch"
If cmdOpen3.Caption = "&Update Record" Then
If IsNull(Me.FTMSubform.SourceObject) = False Then
Me.FTMSubform.SourceObject = "frmFTMInfo"
Me.FTMSubform.Form!txtFirstName.Enabled = True
Me.FTMSubform.Form!txtFirstName.Locked = False
Me.FTMSubform.Form!txtFirstName.BackStyle = 1
Me.cmdOpen3.Enabled = True
Me.cmdOpen3.Caption = "&Save Record"
Me.cmdOpen4.Enabled = False
Me.cmdOpen4.Caption = "&Update Record"
Else
Me.FTMSubform.Form!txtFirstName.Enabled = False
Me.FTMSubform.Form!txtFirstName.Locked = True
Me.FTMSubform.Form!txtFirstName.BackStyle = 0
Me.cmdOpen3.Enabled = False
Me.cmdOpen3.Caption = "&Save Record"
Me.cmdOpen4.Enabled = True
Me.cmdOpen4.Caption = "&Update Record"
End If
End If
If cmdOpen3.Caption = "&Save Record" Then
If IsNull(Me.FTMSubform.SourceObject) = False Then
Me.FTMSubform.SourceObject = "frmFTMInfo"
If MsgBox("Save update to this individual?", vbQuestion + vbYesNo, "Save Update?") = vbYes Then
DoCmd.Save
DoCmd.Close acForm, "frmFTM"
DoCmd.OpenForm stDocName
Else
MsgBox "Return to the FTMInfo Form!", vbInformation, "Save Function Aborted!"
End If
End If
End If
End Sub
~Van
Adding Records Only On Button Click?
I am building a database with a single table of records. I have created a form to allow new entries to be made to the table in a user-friendly way.
The problem I’m stuck with is how do I restrict the addition of new records on the form? I want the new record to only be added to the table upon the click of a button, but at present if I tab through, or exit the form the record is saved anyway.
Not all fields on the form are required input so I’m thinking that validation of every field is not the way to go.
I only ever want the record to be saved if a user clicks on a button and under no other circumstance.
I've been trawling through the posts back to about page 15 so any help would be appreciated.
Ksan
Hello everyone!I need to call the button_click procedure for a button on a form (button1), from another form, if you see what I mean!.Basically the user opens form1. They click a button which opens form2. Once they have finished on form2 they press the close button, which is the point where I need to call the button1_click procedure on form1.I imagine it's something like this:Call Forms![frmForm1]![button1]![Click] orCall Forms.[frmForm1].[button1_Click()]But no matter what syntax I try it just won't work! They're very basic forms, with only 2 buttons on and basic commands.Any help appreciated! Thanks
View 5 Replies View RelatedHow can i deactivate mouse second button click on form?
Can anyone help me please?:)
How to add new record by using vba or sql once click a button?
View 1 Replies View RelatedI try to run a function off of a button click.
The code is
Private Sub Command_Click()
Run fuctionname()
End Sub
The code is ran, but then I get a msg box : Run-time error '2517':
Microsoft Office Access can't find the procedure '.'
I have a continuous form with button for every record, wich has a VBA code. I want to put Button in header form, when i click it, then should run all button in continuous form. How can I do that.
View 14 Replies View RelatedExport to excel on button click:
How can I export a query result into excel on a button click?
After data is entered into text box, on the "On Enter" event, how do I make it click a button on the form?Similar to the effect of when you enter your username then password, most people just hit enter on the keyboard to auto click the login button.
View 1 Replies View RelatedI have Acrobat PDFMaker.
In Access' file menu, there is a menu called Adobe PDF and under it, it allows you to merge multiple reports into a single PDF file.
How can I create a button that can do this?
Thanks in advance.
I would like to develop a command button that archives the current record displayed in the form - my intent is to move that record from one table to another - a sort of automatic cut and paste from one table to another...can anyone help???
View 4 Replies View RelatedHi,
I would like to export a table formed by a Query into a excel sheet with a Click of a Customized button. can Anyone help me how to do that.
I can do that by going to file and export to excel sheet but i need it to be done with a button of my own .
I have been playing with the sample DB alastair69 donated in the sample db section of the site. "The nice timer function".
If you don’t start the timer right away you don’t have the correct time.
I haven’t figured out how to add a reset type of button to display the most current time in the start time field. Can any one help me out please?
I have documents (mostly Word) stored in an Access table. The table contains two fields. (1) a text field with the document's name and (2) an OLE field that holds the document.
When I press a button with the document's name on it (or it could be a hyperlink or a dropdown) on a form then I would like the document stored in the matching OLE field to open in the appropriate program for that document.
If I could set the permissions of the document to read-only then that would be great too. If I could prompt for read-only or read-write (no password necessary) access upon opening then that would be even better.
I can store documents in the table, but I have no idea how to launch them from a form button (or hyperlink, or dropdown).
Note: This is all within Access. This is not a web page related question.
Thanks in advance,
Andrew