I have this linked table query from a OBDC and I need to be able to filter out specific dates in that query. The dates in the table were in text format and I converted the dates using the CDate function. I wanted to filter the query to a single date and always I get the Datatype mismatch in criteria expression error.
However, filtering dates does work only when there are other specifications in the criteria fields (e.g. if I specify a date and and name). My SQL code in error looks like this:
SELECT purch_hist.PUITM AS ITEM, purch_hist.PUPO AS PO, purch_hist.PUQTY AS QTY_RECEIVED, CDate([purch_hist.PURDT]) AS RECEIPT_DATE, itmcnt.ITBYR AS BUYER, purch_hist.PUCST AS UNIT_COST, vendor.NVNO AS VENDOR NO,
[code]...
This query works fine with a non converted date field, however the dates I need are in text format and need to be converted since I do not have permissions to edit the tables.
I am trying to do date calculations, but when I generated my query to run the report off of I lost my formating and all my cells turned to text. I have tried to search this problem down and it seems that I could use the CDate function to correct my cells, but I am unsure how to use it.
My query (Report General Query) is based on two separate queries (General Protocol Query Pull Dates 1-9 and 10-60). It appears that the formatting is correct in the two separate queries, but turns to text when combined into the final query.
How do I correct this and where do I need to do this? In the Report General Query?
I would like to convert 2013.11.13 which is a string into a date. This is what i have so far but it's not working.
2013 year
11 month 13 day of week Dim strDate As String, dteConvertedDate As Date strDate = 2013.11.13 dteConvertedDate = CDate(Mid$(strDate, 6, 2) & "/" & Left$(strDate, 4) & "/" & Right$(strDate, 8)) MsgBox (dteConvertedDate) End Sub
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
Please help, the attached code works fine in Windows XP but twhen run on a Windows 2000 pc it fails on the create object, any ideas?
Function GetXmlFilename() Dim objDialog GetXmlFilename = "" Set objDialog = CreateObject("UserAccounts.CommonDialog") objDialog.Filter = "XML Files|*.xml|All Files|*.*" objDialog.FilterIndex = 1 objDialog.InitialDir = "C: emp" If Not objDialog.ShowOpen Then Exit Function End If GetXmlFilename = objDialog.Filename End Function
I have written a simple function that I would like to use in a query. The function would return a value for each record where the parameters equals 2 different fields of the same record.
Private Function FctConvertInch(LineDim As String, LineShape As String)
'To Convert a String to a value and then convert that value from mm to inches 'Lines dimension = 00.0000x00.0000 if line is flat 'Lines dimension = 00.0000 if line is round Dim StNum1 As String Dim StNum2 As String Dim DbNum1 As Double Dim DbNum2 As Double
If LineShape = "round" Then '"CDbl" convert a string to Double number FctConvertInch = CDbl([LineDim]) / 25.4 ElseIf LineShape = "flat" Then StNum1 = Left([LineDim], 7) StNum2 = Right([LineDim], 7) DbNum1 = CDbl(StNum1) DbNum2 = CDbl(StNum2) FctConvertInch = (DbNum1 / 25.4) & "x" & (DbNum2 / 25.4) End If End Function
I have put the function in a new module, and have try to use the function in a query with the fields LineDim and LineShape , I've also added the field FctConvertInch(LineDim,LineShape) but it doesn't work. Am I using the function the the correct way?
I have a table consisting of 12 columns of data type number. for each row i want to display a count wherever the value of a row is greater than 100, that is, how many times the value greater than 100 appear in the 12 columns. PLease help???
I have a field in a query that I want to select the value from a field, but if the value is null, then to select the value from the same named field in a different table.
Basically the whole point is to use the given description unless one doesnt exist, where the default one will be inserted instead.
I have a field I want to calculate using IIF. There are about 40 possible values, thus I have about 40 nested IIFs. Because I get "query is too complex" when I try to nest all 40 IIFs, I've had to break this down into 3 fields. I then have to do a little more manipulation to end up with the 1 field I originally wanted. All that works fine, however, I'd like to be able to calculate the value in 1 field instead of 4 fields.
I'm not too good with VBA, but looking at some examples, I tried creating the following function (this is just a small sample, but if I'm on the right track there will be about 40 of these "Step" variables and ElseIfs):
~~~~~~~~~~~~~~~~~~~~~~~~~~~ Public Function IfThen(BYStep As String)
Dim test2 As Integer Dim Step070 As Integer Dim Step075 As Integer Dim Step080 As Integer
If BYStep = "07.0" Then test2 = Step070
ElseIf BYStep = "07.5" Then test2 = Step075
ElseIf BYStep = "08.0" Then test2 = Step080
Else: test2 = 0 End If
End Function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In my query I have: IfThen([BYStep]) AS Test2
It took me awhile to get to the above where when I ran the query I didn't get a message about the wrong arguments. Now, I don't get an error message, but the field Test2, comes up empty for every record.
Is there a way to do what I'd like to do (having the 40 if/then/elses in a function, and then using that function in 1 field in the query)?
How do you use the IIf function in a query if you want to specify more than one paremeter? eg. IIf(MotherBirth="Australia", "Oceania", "Other") works but what happens if Oceania applies to Australia, Fiji and New Zealand? I tried IIf(MotherBirth="Australia" or "new Zealand" or "Fiji", "Oceania", "Other") but this doesn't work... What am i doing wrong?
I have a project at hand and it's been a predecessor of mine and client has asked me to do some work on it and extend functionality - but I have not really delved into Access before and I have had to worked my way through to this final snag :/
The Main Form has one sub form. This sub form allows the user to add multiple order items i.e. qty, stock, description from records within the system - fairly straight forward.At the last column of each row is the sub total of those particular items i.e.
Qty Unit | Item ID | Total ----------------------- 2 | 1234 | 80.00 ------------------------ 1 | 43526 | 20.00 ------------------------ > | |
So the total is a function of =[Qty Unit] * [Unit Price].Then in the Footer of this SubForm is the Sub Total
=SUM([Qty Unit] * [Unit Price])
All fine and well..... However, the additional functionality kicks in.
Lets add the additional customer_id from the Main Form. Each Item bought is dependent on the customer_id i.e. they get special prices depending on who they are.So a New table is made which has the Item ID and SpecialPriceID (of a table to define as a specialPrice) and the Price linked to this Item and Special Price category. So say that there are two groups of users "wholesale" and "nonwholesale" these would be SP_1 and SP_2 and each client is defined either one of these, and each stock item has a Price for each SP_1 and SP_2. Hopefully I've explained myself there.
Back to the SubForm. So now the Total needs to calculated differently with needed the external customer_id from the Main Form.
Code:
Function CalculateSpecialPrice(ItemID As String, CustomerID As String, Unit As Integer) Dim SPSelect As String SPSelect = "SELECT Price FROM [Items_SpecialPrices] WHERE" SPSelect = SPSelect & " ItemID = '" & ItemID SPSelect = SPSelect & "' AND SpecialPriceID = (SELECT SpecialPriceID FROM Customers WHERE customer_id = " & CustomerID & ") "
[code]....
its the sub total I just keep on getting #Error on. I have even watched (using alerts) that the correct return variable is the same as the individual rows. This is the equation I used for the SubTotal within the footer.
The user will input the JobId, PositionId, ActivityId. I want to return all the TaskName ,CompetencyId, CompetencyName Where the following: The highest priority within the same keyword Basically group by keyword then pick the highest priority I have done this:
SELECT Max(Competency.Priority), Competency. Keyword FROM Competency INNER JOIN ((ActivityTask RIGHT JOIN (positionTask RIGHT JOIN (JobTask RIGHT JOIN task ON JobTask.TaskID = task.TaskID) ON positionTask.TaskID = task.TaskID) ON ActivityTask.TaskID = task.TaskID) INNER JOIN TaskCompetency ON task.TaskID = TaskCompetency.TaskID) ON Competency.CompetencyID = TaskCompetency.CompetencyID WHERE (((JobTask.JobID)=[job])) OR (((positionTask.PositionID)=[position])) OR (((ActivityTask.GroupID)=[Activity])) GROUP BY Competency.CompetencyKeyword;
It works fine, it returns the all the keyword, and its highest priority. But I can’t return the Competency.CompetencyId, Competency. CompetencyName with the aggregate function Max
I was wondering if anyone can point me in the right direction please. I have created a new module in my Access database (in the module object view) and I can see it in the module view. I am also able to call it in the expression builder under Functions.
Unfortuantaly if I create a query I am unable to use it. If I create it for the first time and open the query and use it, it works lovely. But if I exit my database and go back in, it does not work. I can still view it in the modules and it is still in the expression builder under functions.
My function is as follows; Public Function GetLabourCost(WorkCodeID, PayRate, Hours) As Currency Select Case WorkCodeID Case "7800" GetLabourCost = [PayRate] * 2 * [Hours] Case "7500" GetLabourCost = [PayRate] * 1.5 * [Hours] Case "1000" GetLabourCost = [PayRate] * [Hours] Case "2000" GetLabourCost = [PayRate] * [Hours] Case "7000" GetLabourCost = [PayRate] * [Hours] Case "8000" GetLabourCost = [PayRate] * [Hours] Case "9000" GetLabourCost = [PayRate] * [Hours] Case "9500" GetLabourCost = [PayRate] * [Hours] Case "9999" GetLabourCost = [PayRate] * 0 * [Hours] Case "9550" GetLabourCost = ([PayRate] * [Hours]) / 2 Case "9560" GetLabourCost = [PayRate] * 0 * [Hours] Case Else GetLabourCost = 0 End Select End Function
In my query I have called it as; Expr1: GetLabourCost([WorkCodeID],[PayRate],[Hours])
HOw to use the format function . I had tried to use it but does not work for me . when i click properties of the particular column in a query and go to format tab , i type in mm:dd:yy( i want to change the format of date ) and then execute the query but nothing happens. can someone help me ?
I have designed an attendance database, with fields for personal details and fields for the days of each month.
I need to have a query that will ask for a certain date(i.e. find the specific field) and then search on specific criteria (i.e. ON SITE) to see which staff are available.
What is the best way of doing this? Any help would be greatly appreciated
Hi all, I have a local table that has data imported from a spreadsheet and we have discovered that one of the fields brings in trailing spaces. Since the Access DB has some querys to manaipulate the data I thought I would just create a qry that would trim the value of that field but I am getting error messages when I try to run the query. Basically it is a update query with the field value written as:-
Code: Trim([Code])
I am leaving the update field in the qry blank and it complains about it not having a destination field which is understandable so how do I go about trimming the value of a field in a query. Is it even possible ?
I made a function to calculate the difference in hours between two times.
Function TimeDiff(Time1 As String, Time2 As String) As Double 'This function is used to calculate the difference in hours between two times. 'It is capable of handling a finish time that is after midnight.
TimeDiff = 0
If Not IsNull(Time1) And Not IsNull(Time2) Then
If CDate(Time1) > CDate(Time2) Then TimeDiff = ((CDate(Time2) - CDate(Time1)) + 1) * 24 Else TimeDiff = (CDate(Time2) - CDate(Time1)) * 24 End If
End If
End Function I have a query where there are 2 sets of times in fields (Start1, Finish1, Start2, Finish2). When I add a calculated column with the following expression: Expr1: TimeDiff(Start1,Finish1) + TimeDiff(Start2,Finish2) it calculates in the query correctly.
However, when I made a new function that incorporated this function, it gave me the #error result in the calculated field. Function OrdinaryHours(Status As String, Start1 As String, Finish1 As String, Optional Start2 As String, Optional Finish2 As String) As Double
'Initialise OrdinaryHours = 0
'If employee is NOT a casual If Not Status = "CT" Then
If Not IsMissing(Start2) And Not IsMissing(Finish2) Then OrdinaryHours = TimeDiff(Start1, Finish1) + TimeDiff(Start2, Finish2) Else OrdinaryHours = TimeDiff(Start1, Finish1) End If
End If
End Function Does anyone know why this would #Error. I have the TimeDiff function initialising to = 0 before doing anything...I am stumped why it returns #Error when it should return 0 in the case of something going wrong.
I have a query problem and I have no idea how to solve it.
In the query there are 4 fields:
1) ID 2) PageRank 3) PageRankNormalized 4) PageRankValue
1) ID is the Primary Key
2) In the PageRank field there are values from 1 to 10
3) In the PageRankNormalized there is an expression PageRankNormalized: (3^[PageRank])
4) In the PageRankValue there is another expression PageRankValue: ((3^[PageRank])*100)/ Max ( [PageRankNormalized] )
Now when I run the query I get the following error message:
You tried to execute a query that does not include the specified expression 'ID' as part of an aggregate function. (Error 3122)
What I am trying to do is to calculate the PageRankValue (4) through an expression that divide ((3^[PageRank])*100) by the maximum value shown in the calculated field PageRankNormalized (3)
------------------SQL------------------------
SELECT [UNIVERSITIES by name].ID, [UNIVERSITIES by name].PageRank, (3^[PageRank]) AS PageRankNormalized, ((3^[PageRank])*100)/Max([PageRankNormalized]) AS PageRankValue FROM [UNIVERSITIES by name];
---------------------------------------------
I am stucked and I am not sure how to use this Max function in a calculated query.
hello i have a query summing sales data by month. what i need to do is be able to list in this query the sales summed for same period last year. I have some other criteria but this is the just of it. trying to use a dsum function in the query itself and using product id and date range derived from fields that calc starting date last year and ending date last year for time period.
example , sum this years jan and feb 2007 sales and also have the dsum function sum jan and feb sales of 2006 in a field right next to the 07 values.
I can not get the dsum function to work??? any ideas????
i enen tried creating a temp table with the 07 sales data summed and values for each period in seperate fields ie date1 = 01/01/06 and date2 = 1/31/2006 and the same for feb. The dsum did not work that way either. If i hard code the dates into the dsum it works by i would like it to be more dynamic based on the date1 and date2 values.
I am trying to use an IIF function in each of three yes/no fields in a query to select records where one of the yes/no fields (as determined by a dialog form) = true, regardless of the value of the other two fields. Each record can contain any combination of Trues and Falses in these three fields.
The field to be evaluated will be determined based on a combo box on a dialog form. For example for the SALproc field the criteria cell contains: -
There are corresponding functions in the criteria cell for the otehr two fields
So when I am reporting for SAL I can include all records where SALproc = true, regardless of whether the other fields are true or false.
I can get these functions to work in three separate text boxes on the dialog a form, and was feeling quite clever, but I can't get them to work as query criteria. I get an error message saying it is typed incorrectly or too complex.
I have also tried using the IIF functions in text boxes on the dialog form, and then using the value of those text boxes as criteria in the query. I get the same error message.
I can also get the query to select the records I want by manually entering True for the SALproc field and * for the other two yes/no fields, so the concept of using some combination of true, *, * as criteria appears to be valid.
I would really appreciate some help on this, I suspect I am not far away from making it work.
I'm assuming that it is actually possible to use an IIF function as a query criteria ... ...
In the meantime I am going to try creating functions containing the IIF functions and use those as criteria.
