I'm trying to get the calendar control 10 to default to today's date when the form is loaded. I searched on it and came up with instructions to place the "Calendarcontrolname.Today" on the form load event, but its not working out. It saves the date that the control was added.
I have a database where all reports are by month. I want a simple way to allow the user to select the month/year and want to know if I can use the header portion of the calandar control for this (although I can't seem to figure that out). The alternative is to use two combo boxes (Month and Year) and in a hidden text box I concatenate them into a date since that is how the report query reads the month (using datediff). I would prefer the calandar control because it is more visually pleasing. If anyone has any ideas or suggestions please !
I'm recently added the CalendarControl 9.0 into some combo boxes in order to quickly input dates - however only the dates are then added, not the day of the week. The day of the week would be really useful if it was visible as the form is outputted to a HTML page for our intranet for other staff to see.
My (relevant) code at the moment is as follows:
-------------------------------------------------
Option Compare Database Option Explicit Dim cboOriginator As ComboBox
Private Sub cboStartDate_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Set cboOriginator = cboStartDate
ocxCalendar.Visible = True ocxCalendar.SetFocus
If Not IsNull(cboOriginator) Then ocxCalendar.Value = cboOriginator.Value Else ocxCalendar.Value = Date End If End Sub
Private Sub cboEndDate_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Set cboOriginator = cboEndDate
ocxCalendar.Visible = True ocxCalendar.SetFocus
If Not IsNull(cboOriginator) Then ocxCalendar.Value = cboOriginator.Value Else ocxCalendar.Value = Date End If End Sub
Private Sub Form_Load() ocxCalendar.Visible = False End Sub
Private Sub ocxCalendar_Click() cboOriginator.Value = ocxCalendar.Value cboOriginator.SetFocus ocxCalendar.Visible = False Set cboOriginator = Nothing End Sub
Dont be overwhelmed by the following, but it may require some extensive thought and I dont expect everyone to understand....
I want to have a unbound form control a subform. On the form I have an unbound text area entitled txtDate. In this area it displays the current date being viewed. I have put left and right buttons on the main form that will add (+1) one day to the date being shown and subtract (-1) one day from the date being shown. I want to conrol it though the "On Click" but I dont know what to enter in the "On Click" field that will allow me this. The reason is, co-insiding with the previous, when the date is changed, the subform is also changed to a new day. Therefore instead of displaying 24 hours of today, you can view 24 hours of yesterday, tomorrow and so on. See, if one is to set the onclick to be: Me.txtDate=Me.txtDate-1, or Me.txtDate=Me.txtDate+1, it calls for a custom macro and I dont know why. I know it somehow resides in some similar command set up.
I also need to know how to make the subform bound but continous, and what exactly does that mean?
I have a form with a date picker control. I am not able to set the default value of the picker to the current date. For example say If I set the default value to "Today", i.e 11 Oct, Even tomorrow it will retain the same value "11 Oct" and not "12 Oct". Is there any way that I can set the default value to current date?
I have a date control and on the Click event I run the following code. Trouble is the Date Control stops working, ie you can't change the date after one click ?
CODE.
Private Sub Calendar7_Click() weekofyeartxt.Value = DatePart("ww", Calendar7.Value) End Sub
I have a parameter query that requires the user to input a start date and end date into dialog boxes generated by the query. My question is: it possible to have a date picker control actually on the dialog boxes when they show for a date to be entered, or is this only possible when using a form with text boxes to generate the dates for start and end dates?
a couple of months ago i found a celndar control replacement that Microsoft kindly provided. i have made a few mods that allow me to change the day/week etc. i would now like to tell it to open on a certain date. the reason is that on each of my client records i have 'Future Appointments'. i would like to be able to select a future appointment and click a button that then opens a form that includes the calendar and go to the date of the future appointment. the calendar controls the diary. whatever date the calendar is on the diary matches. so to change to the date of the appointment i need to change the calendar date.
that didnt work as the calendar does not seem to recognise it.
i am totally lost with this as i dont even understand most of the code that is behind the calendar, so i dont know what i am looking for to use to open it on a given date.
I'm setting up some analytical reports and i'm having a hard time with some date criteria.
I've gotten monthly averages already and what i want to do is take those monthly averages, and average them throughout the year. (the year being from the specified date on a form control back one year)
Month([Forms]![Report Runner]![Date1]) and Year([Forms]![Report Runner]![Date1]) worked great for specifying a certain month in a certain year, but what i'd like is to show all the monthly numbers for every month going back one from [Forms]![ReportRunner]![Date1].
I tried this:
Code: >(Year([Forms]![Report Runner]![Date1])) And <((Year([Forms]![Report Runner]![Date1]))-1)
Can you update a text box on a form based on input of a date control? Here is what I have. I have several date controls on my form, and I want to update a status textbox based on which of these date boxes is filled out, but I need the status to be filled into the table as well. Do I update the field on the table, and then requery the text box? Is there some other method for accomplishing this?
I'm building a workCube reservation system and I've been tasked to have it work kind of like an airplane seat reservation system. I've laid out my form with option buttons representing the location of each available space. (space1, space2, space3...space16)
My desired outcome is to be able to select a date from a calendar popup and have the options buttons react to that date if they have been reserved. (change color and indicate "reserved").I've tried to create the form based on a query which represents the "booked" table.
Tables:
Employee (k)empID emplyeeName
Space (k)spaceID space
Booked (k)spaceID (k)empID (k)bookdate
Some rules a space can be booked by any ONE employee on any day.How can I get any and all of the option buttons to react if there is a reservation in place on the day indicated by the calendar?
In a form (bounded to this table) I have, of course, 2 controls bounded to this fields:
txtD1 and txtD2
If the user change the value in txtD1 (using the Date picker) I like to change the DefaultValue for txtD1 to the new date and the DefaultValue for txtD2 to the new date + 1 day. Something like this:
Code: Private Sub txtD1_AfterUpdate() Me.txtD1.DefaultValue = Me.txtD1 Me.txtD2.DefaultValue = Me.txtD1 + 1 day End Sub
I tried whatever crossed my mind... with the same "result" : #Name?
My Regional settings:
Short date format: dd.MM.yyyy Date separator: Dot Simple: 05.12.2013
I need to set calendar control as criteria for date in VBA query. I cannot find Calendar control in ActiveX tools in Acc 2010. Where is it?
Date picker seams like very slick and simple solution but I can see it only in database. As it might be solution to my problem, can date picker be used on a form as criteria for VBA query?
Working in Access 2007 - I would like to have an updatable calendar in the header section of a form, and when this is changed by the user I would like the subforms (there are several) in the details section to be updated with various appointments with dates corresponding to the date selected in the header.
I am trying to allow a calendar to search through a text box with a large amount of data in which will have headings using the date so i wanted to use a calendar search. Hopefully this will be be like the find function in word where you type (or in this case select a date) then click search or next which will take you to that specific date.
I have a data entry form which have a date field.This field retains the existing date after the record is saved with vba after update event.
Private Sub Form_AfterUpdate() Me.ProductionDate.DefaultValue = Chr(35) & Me.ProductionDate.Value & Chr(35) End Sub
Almost after a year of perfect working i am facing a problem.When i save the record , in date field my date and month values are reversed if date is between 1-12.although my database stores perfectly valid date. for example if date is "10-09-2014" (dd-mm-yyyy) after saving form date field becomes "09-10-2014". but if date is "13-09-2014" The date form field retains this value .
I'm trying to pull a date from a table into a text box on a form tab control using DLookup and I just can't figure out what is wrong with my DLookup expression:
=DLookUp("DateOrdered","tDateOrdered","PrNumber=" & [PrNumber]) ----- (DateOrdered is short date, PrNumber is text, db is split Access 2013)
Whats missing in this expression? I've tried every criteria variant I could find but to no avail.
I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
I have a form with a tab control, inside the tab control I placed an ActiveX control (Microsoft Web Browser). These are at the bottom of the form.
Everything displays fine if the entire form fit on the screen but if the form is too long and I scroll down the browser control is getting obscured by the tab control and getting chopped off (the contents are covered). It is as if the browser control is staying in space where it was and moving behind the tab control as I scroll.
This problem does not occur if I place the browser control directly on the form. Also I note that the browser control is sitting correctly within the tab control.
I have been through all the settings and properties of both controls and haven't been able to fix it. I searched all over the web but no one has previously stumbled across this one by the look of it.
I have table that I had to add a new field to which we update with a form. I tried to add a control for the new field but the field does not show up in the list for the control source. I am trying to add a list box to the form with a blank and 5 options.
I have attached screen shots of the table design and the form. The table has the field in datasheet view and I have manually entered a few entries in it but it still will not show in the control source for the form control. The top section of the form is where we enter and select the data for the new records. The bottom section (circled in red) autofills the matching record, from separate tables, for updating with the new entries.
I have added form controls for modified fields in the past so I am confused about why this is happening.
OK. I have searched and searched and every thread dances around similar situations but none seem to address this particular one. I am trying to make a control on a sub form visible/not visible depending on the condition of a control on a main form. The catch is that the control I'm trying to change the state of is on a subform located in a tab control. I've tried a thousand combinations and none seem to work. How do I reference the control on the subform in a tab control?
Main Form: frmMemberMain Tab Control: TabCtl12 Tab Control Page: 2 Subform: frmChildren Control on subform: txtRelationship
Can someone please help before my brain explodes!! Thanks! :eek:
I have reviewed the posts for 'Control Validation' and dowloaded the sample database kindly posted by ansentry.
In the PaymentAmount example, a name has to be entered in the first control before an amount is enterered in the second control. If the controls and tab order are reversed, the validation doesn't work.
I have a form where the 1st Control needs validating before moving on. The code below doesn't work.
Private Sub Form_BeforeUpdate(Cancel As Integer) If IsNull(Me.Employee_No) Then MsgBox "Employee No Required", vbCritical, "Data required " Cancel = True Me.Employee_No.SetFocus Exit Sub End If
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I'm trying to get my "IncidentDate" field to autopopulate two other date fields to a few days from the "IncidentDate". The other two date fields are "ContainDueDate" and "RootDueDate". I'm trying to accomplish this on my "Test CAP Form"
I tried using the following in the BeforeUpdate of "ContainDueDate" and received a complier error: expected =
Code : DateAdd(d,2,[IncidentDate])
so I removed the parenthesis and nothing happened
Code : DateAdd d,2,[IncidentDate]
I even tried redoing it in the AfterUpdate of "IncidentDate" and nothing happened either
Code : DateAdd d,2,[ContainDueDate]
I'm not sure if I'm even using the right function to get what I want.