Hello:
I have read the Microsoft article at http://support.microsoft.com/kb/q95918/ several times. However, I am looking for an expression I can place in the field name to calcluate the median of another field in the same query. Is this possible? If not, I don't understand how to call the function created in the Microsoft article.
Example (fields in the query)
Expr1
Expr2:Median(Expr1)
Thanks in advance.
What is the easiest way to calcuate a median value for a group of values?
View 4 Replies View RelatedI am attempting to calculate the Average & Median on a particular field in a query.
=Median("qry2007_KPI_AvgJan_A","ContractSignedToReceived")
query name is qry2007_KPI_AvgJan_A
field name is ContractSignedToReceived
I am getting #Name? error.
Any ideas why? Thanks for any help troubleshooting this.
I am using the code below to evaluate values for each transaction to determine the median:
Function MedianF(pTable As String, pfield As String, pgroup As String) As Single
'*******************************************
'Purpose: Return median value from a recordset
'Inputs: ? medianF("Values", "Industry") <enter>
'Output: results are currently incorrect
'*******************************************
Dim rs As Recordset
Dim strSQL As String
[code]....
The code generates median results based on the value but not the correct ones, as I check results in Excel using the Median function. I need to see the median for the transactions within the same industry and I do not know how to do that . Below are some sample transactions including the Industry, Value, mymedian (which the current results based on my code) and the expected median result (which I calculated in Excel based solely on the transactions listed here). Note that mymedian results listed in the 3rd column are determined using the complete data set (over 2000 transactions). I only included a few sample transactions below to show that I am currently getting 2 different median results: 44.62 and 50.82. Also be aware that I do not want to evaluate any zero value transactions, which I believe I am handling in the strSQL line above where I indicate <>0 . I need to see a Median result for each industry and the result should be the same for all transactions within the same industry.
Industry Value mymedian Expected Median
Aerospace 18.01 50.82 40.45
Aerospace 53.02 50.82 40.45
Aerospace 109.18 50.82 40.45
Aerospace 61.54 44.62 40.45
[code]....
This is how I am passing the values from the query to the module, passing the value of Period2 if Period 1 = 0, else passing Period1:
mymedian: IIf([Period1]=0, medianF("qry_My_Query","Period2","Classification_I ndustry"), medianF("qry_My_Query","Period1","Classification_I ndustry"))
Hi,
I am trying to run queries to determine the median values for different age groups of peoples each with different illnesses. At the moment the database asigns an age group for each person whos age falls into the module determined age brackets, under 16, 16 - 40, 41-50 etc.
For each age group and diagnosis (bronchiectasis, sarcoidosis or pulmonary fibrosis), I need an age distribution chart including the min, max, mean and median.. min max mean are all simple enough and using MS VB median module I can individually calculate medians for each of these. The problem comes when trying to combine these all in one data set.
One solution I found was to combine two reports so I have queries with min, max, mean and then the medians set up beside them. The problem tho with this is that when a recordset returns 0 results (i.e there are no people under 16 with sarcoidosis), the query linked to the report does not return the value of 0 but as they dont exist it does not include it at all. The median fields however return blanks and cos of this the line spacing becomes messed up and the report becomes incoherrant and incorrect.
I think the solution will have something to do with querying, though so far I have not been able to work it out :confused:
Please help!
I've gotten the medianf fuction that is pasted on these boards working in the attached db example. The problem I am running into now is the medianf function (correctly) takes the median for an entire table at once. My dataset example looks like:
typenum
t11
t12
t13
t16
t16
t1100
t21
t22
t2200
I'm trying to end up with median t1 = 4.5, t2 = 2. With the way that function works, it sets them both to 3 which is the median of the entire set. I have the query saved in here already setup so far. Any ideas on getting the grouping to work properly?
Can I do an Median Function in Access? I do not see in the the built in functions?
Thanks
Newto Access, new to the board. Have searched for median queries and have not found what I am looking for.
I want to incorporate a MEDIAN calculation into a querey. I have 6400+ records, which I need to be grouped by 61 industries. I have suceessuflly grouped and got the MAX, MIN, AVG, etc... and I would now like to add into this grouped query the MEDIAN calculation. Can someone here help a brother out?
OK try this:
http://www.playfm.orcon.net.nz/Chart3.GIF
I want to get the Median number from the "This Week" column for Cher. The output should hopefully tell me that Cher has a score of 7.
In addition to this.. I want to be able to create a report which tells me the medians for all the artists in the sheet.
Any ideas??
Cheers, Alex.
I have a report that calculates a average value from a field. Is there a way to figure out the median value? I did not see a function for this.
View 14 Replies View RelatedI have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
View 9 Replies View Relatedi would like to run a query that works out the busiest day in a month but i also want to run a range from two dates and be able to convert them to
mon ? entries
tue ? entries
and so on
is this possible?
many thanks
michelle
Hi Friends,
I have made one form based on query. Its a invoice entry form. I have price, quantity and amount. I want when i enter price and quantity, amount should be calculated. I know its very simple for you. Any suggestion.
thanks
mithani
Hi All.
I have Request, Device and Receive table. All table has DeviceID. I create query to calculate total amount of each type of devices which was requested by link Request and Device tables. And query to calculate total amount of each type of devices which was received by link Receive and Device tables. I would like to create Balance query to calculate:
Total_Receive - Total_Request = Balance
If devices in Request and Receive table is the same result is correct. But if in Receive table add new type of devices I cannot see amount of new device in Balance query. How to fix that problem?
Thanks.
In a query that utilizes a table containing a yes/no field, is it possible to calculate the yes/no field and get a numeric return? If so, can you share how this could be accomplished. Thanks
View 5 Replies View RelatedHi All
I try to create a query based on Table1 and fields Date and Result. Is it posible to get a query that calculate two amount of Result field when that field is null and not null?
That two values of Result field I will use to create monthly Pivot report in which each bar will display amonts Completed and NonCompleted result.
Thanks.
Dear all,
I have a query that is based on orders table and contains "Qty", 'UnitCost', and "ctualUnitCost", in addition to yes/no control to indicate if "SalesTax" is applicable.
I want an expression in the query to calculate total cost in one of 2 conditions:
if no sales tax then TotalCost = Qty*UnitCost
if sales tax is applicable then Total cost = Qty*UnitCost*1.1
how can I write this expression
thanks
I'm trying to calculate the amount of years employed in a query and I keep getting "Data Type Mismatch in criteria expression".
I'm putting the expression in the YearsOfService Field that I've created that I would for the total in years to populate.
Here's the field expression:
DateDiff("yyyy",[EmpHireDate],Date())+(Date()<DateSerial(Year(Date()),Month([EmpHireDate]),Day([EmpHireDate])))
Thanks for any help...
FYI EmpHireDate is a Date/Time Field and YearsOfService is a Number field
Thanks for any help...
How to calculate the percentage of kilometers per order compared to the total number of kilometers per carrier.
In the attached screenshot send queries where I need formula.
Mileage on the orders of the field called "Korkma" . The formula should look like: # [Korkm] / [total kilometers per carrier] #.
I do not know how to get the total mileage driven by the carrier (the carrier is in the query in the Field Name Plate) for the month.
For example:
date 1.1.2013.,Plate:Pribus Korkm= 37
date 2.1.2013.,Plate: Pribus,Korkm=56
date 10.1.2013.,Plate: Pribus, Korkm= 70
Formula: [37]/[163] = 0,23
[56]/[163]= 0,34
[70]/[163]= 0,43
Is there a way to calculate the mode value in a query?
In a summary query, I need to return the value that shows up the greatest number of times in a certain column of a table. Is there a function built in to Access or an easy way to perform this, or do I have to make my own function to handle this?
I am looking to calculate numbers in query like this if the field name in query is Unit and the second field name is amount and i want that the amount field to calculate the unit field on this criteria..Suppose if total unit is 393 so the calculation should be like this;
First hundred should be calculated with 100.00 X 5.79 = 579.00
Second 200.00 X 8.11 = 1622.00
Third 93.00 X 12.33 = 1146.69
Total should be displayed in the amount field = 3347.69
Hi everybody. I got a access 2000 query that lists :
1)weekno
2)year
3)project (project number )
4)QweekylyReportHeader (project description )
5)customer (customer that requested this project)
6)department (department number and name that implements this project)
7)Projectleader ( project leader name and number that is responsible for this project)
8)Task (Task number that is done for this project )
9)task description (description of task )
10)employee ( employee number who is working in this project )
11)name (Employee name and initial and last that works for this project )
12)hours ( number of hours employee worked in this task ) ==> i want cumulative for this
13)salary (amount of salary given to this employee) ===>i want cumulative for this
I want to create another query that lists :
A)cumulative value of hours worked on particular project task up that point.
b)cumulative value for wages given for that project task up that point.
http://i5.photobucket.com/albums/y180/method007/weeklyprojectdata2.jpg ( query output sample)
The above query ONLY lists hours worked and wages gives for particular project task only during
each week.But i want hours worked and wages give for particle project task up to that point in week. For
example a project task might have implemented last week but not this so i want to take that in calculation as well.
I be happy if some expert show me how i can calculate the cumulative value for hours worked and wages given for particular
project task.
Notes:
- There is a possibility that during a particular week no task been implement for particular project.
- One employee can work in more then one project
- One employee can have more then one salary (amount) for the same
project because he might get raise in salary!
- Only tasks carried this week will be printed in the weekly report
http://i5.photobucket.com/albums/y180/method007/constraint.jpg ( pic of database)
http://i5.photobucket.com/albums/y180/method007/hourlywagesroportfinal.jpg ( query output population)
http://i5.photobucket.com/albums/y180/method007/queryindesign.jpg (query in design view)
query that display hourly wages of certain project during each week
SELECT
querythisweek.weekno,
querythisweek.Year,
querythisweek.Project,
QweeklyReportHeader.Customer,
QweeklyReportHeader.Department,
QweeklyReportHeader.description,
QweeklyReportHeader.ProjectLeader,
querythisweek.Task,
dbo_Task.description,
querythisweek.Employee,
[lastname] & ' ' & [initials] & ' ' & [insertion] AS Name,
querythisweek.hours,
querythisweek.Salary
FROM
dbo_Task
INNER JOIN ((QweeklyReportHeader INNER JOIN querythisweek ON QweeklyReportHeader.projectno = querythisweek.Project) INNER JOIN dbo_Employee ON querythisweek.Employee = dbo_Employee.employeeno) ON dbo_Task.taskcode = querythisweek.Task;
code for querythis week( calcualte the salary and hours worked)
SELECT dbo_Hours_worked.Project, dbo_Hours_worked.Year, dbo_Hours_worked.weekno, dbo_Hours_worked.Task, dbo_Hours_worked.Employee, dbo_Hours_worked.hours, (select a.amount * dbo_Hours_worked.hours
from dbo_Hourly_wages a
where dbo_Hours_worked.Employee = a.Employee
and dbo_Hours_worked.Project = a.Project
and a.Year * 100 + a.weekno = (select max(b.Year *100 + b.weekno)
from dbo_Hourly_wages b
where b.Year < dbo_Hours_worked.Year
or (b.Year = dbo_Hours_worked.Year and b.weekno <= dbo_Hours_worked.weekno))) AS Salary
FROM dbo_Hours_worked;
Hello:
This is for the purchasing guy at my client's office. He has 9 vendors he wants to track their on time delivery performance. The data comes from the purchase order tables in his accounting software, to which I've linked via ODBC.
So far so good. I've created a query to pull only those 9 vendors from his total population, then ask for the date range to query by date for the date range (start and end date), and use an expression to calculate the difference between the date wanted and date received so he can tell if the delivery was on time or not. (ex: date wanted: 3/10/06 date received 3/13/06. 3 days difference = late delivery)
The twist is he wants another field so he can mark whether he considers the delivery late or not depending on extenuating circumstances he keeps locked up in his cranium, despite what the date difference results tell him. So, I created a combo box and he can select "Yes" or "No." If he selects YES, a value of 1 is written to the table in that field, if he selects NO, a value of 2 is written to the same field.
So, I need the query to group by vendor, count the total number of entries for that month by that vendor, count the number of "1"s and express that total as a percent of total deliveries.
To summarize, vendor A had 8 deliveries, 5 were on time, meaning he had a 62.5% delivery score. Vendor B had 10 deliveries, 7 on time, meaning a 70% delivery score.
Sorry for the long winded explanation, but perhaps someone can assist. All help appreciated.
I have two excel tables that I linked in access. From excel tables I created query that gives me all data I need.
First table has data of periods and prices of apartment per period. For example:
PropertyID 1111
PropertyName Apartment Zagreb Mila
StaringDateOfPeriod 1.1.2015
EndingDateOfPeriod 1.7.2015
PriceForPeriod 100
.
.
PropertyID 1111
PropertyName Apartment Zagreb Mila
StaringDateOfPeriod 1.7.2015
EndingDateOfPeriod 31.12.2015
PriceForPeriod 120
Now as you can see I have apartments with prices that change per periods.
Second excel table gives me information of total paid service that customers need to pay , number of days that he will stay and CheckIn and CheckOut dates of those guest.
In calclutated fields in query I created calculations like TotalyPiad(from 2. table) - OwnerPrice*TotalyNumberofDays . I guest good result IF i have reservations that matches or is it BETWEEN StartDate and EndDate of periods.
BUT If I have reservation that is overlapping , where CheckOut of guest is 1 or more days > that EndDate of selected period I have problem with calculation because my calculation is based on WRONG price in that period.
For now what I manage to do is to create separate field in query where I calculated number of days that are out of range
CHECK_IN - StartingDate of period
CHECK_OUT -EndingDate of period
Check-in date - starting date of reservation of guest
Check-out date - ending date of guests reservation
nabavna cijena - owner price
Code:
PreklapanjePerioda: IIf([Check-out date]>[CHECK_OUT];[Check-out date]-[CHECK_OUT];Null)*[nabavna cijena]
But still when I calculate those number of days I multiple those number of days with old period.
So How can I MULTIPLE THOSE NUMBER OF DAYS WITH PERIOD +1 , I meen next period not this old one just for those days that are out of range? [CHECK_OUT] +1 doesn't work it just add extra day in my CHECK_OUT filed
My final idea is :
Separately calculate in one field number of days that are out site of range
Calculate number of days of reservation of guest that are in range
= make sum of those two fields
From that I will create report which I will send to our owners of properties (number of reservations, reservations details, price that they need to pay to us ...)
I also thought this could be possible to make using VBA but I am still not skilled anough in it. Also I was thinking of creating calendar where I would that add those two queries but how to create simple calendar in Access. Is there some template for simple calendar in Access?
I have created a database that records the scores of each player etc and puts them in league table like structure.
Within this database which I would like to extend I would like to know if its possible to have a query to calculate a league table for the teams if home team overal score is greater than away team home team get 2 points for win 1 for draw no points of loss and same if away team won.I also want to be able to change it to a web database and add club address details like contact list to it.
I am trying to write a function in an access 2007 query that will calculate the date range for each of my records based on the month-ending date and the In-transit days assigned to each record (excluding any weekend days) (i.e. if the in-transit days number is 5 & the month ending date is 5/26/12 then my date range would be 5/22/12-5/25/12). I want the funtion to calculate the range, I cannot use parameters as each record will have a different range based on it's in-transit days .
View 1 Replies View Related