Calculate Total Hours (for All Employees) On Each Department?
Sep 28, 2005
Hello, i have a table with the fields: "employee_number", "shiftdate" "department" "basic_hours", and "over_time"
And a query named "employee_hrs" looks at the fields in this table, i would like a new field in the query to be able to calculate the total hours for all employees together but for each department.
eg the total of: basic hours + overtime for department A)
the total of: basic hours + overtime for department B)
and so on for each department
would only like to show one instance of a department (distinct) with the total hours done by all employees for that department?, if any one could please help me out that would be great!?
I have a problem with Microsoft access 2003. I want to design a Check in/Check out Time Data base for my university final term project. In this data base I need to show the total of the working hours of each personnel in a month.( for instance: 124 hours and 55 minutes in one month). But adding up the hours, when the time variable reaches 24 then time automatically goes back to 01:00. As a result, the correct total hours cannot be calculated....
I am interested in reporting so need totals, I can write a query that will count the number of machines in a dept like so
SELECT [Computer Inventory].Department, Count([Computer Inventory].ID) AS CountOfID FROM [Computer Inventory] GROUP BY [Computer Inventory].Department;
This works fine, however I now want to add more so are two fields
To_be_migrated Is_migrated
These are just checkboxes so I assume criteria is true or false
I need a query which will give me
The total number of machines by dept The total marked for migration The total migrated
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
I need to calculate the difference between to datetime fields. However, i need to exclude weekends, holidays and non-business hours. I also need to return the result in hours, minutes, seconds.
can this be done. if so, does anyone know how to do this, or is there code that i can implement and save for future uses.
Hi, I am trying to show the time difference between 2 times but the calculation is not working correctly.
First I work out the totaltime on mins between 2 dates using datediff, then I am trying to convert to hours and minutes like : Total_Time: Format([Sumoftotaltime_mins]/60,"00") & ":" & Format([SumofTotaltime_mins] Mod 60,"00")
This is working until I have something like :
03:00 15:45 25:20
this should work out as 44 hours and 5 mins but for some reason it is showing as 43 hours and 5 mins.
I need to create a derived attributes (total hours left, total hours used).
In order for the calculation I have days_allocated in the employee table (this is converted into hours by multiplying this by 24).
How can I create a field in a query that works out the amount of hours used and left?
Here is a typical holiday record (screenshot of my query that I am trying to do)
http://img3.freeimagehosting.net/uploads/th.8af9f3cd25.jpg (http://img3.freeimagehosting.net/image.php?8af9f3cd25.jpg) Can someone please help me create a formula.
I have a table wherein the time worked by 25 employees are recorded. This table has the start time, endtime, break time and late times. The Late Time is the number of minutes that the employee is late to work. I am required to do a query of the team's (all 25 staff) late times per month. I have done a query which shows the late times of the individual on the dates that they were late to work and created a crosstab query for that.
I am going around in circles. How can I have a total of the team's late times in a query? Please, could someone please point me in the right direction?
I am trying to build a query to show the total sum of hours a staff member has done in a certain department and the amount of sleep ins they have done. Each staff member has a unique ID. In the query I can get all the information but it shows on two lines dependent on department. I want this to show on a single line. Each employee will never have more than two departments. The query is called "QryForForum".
Let me just start out by saying that when it comes to Access, I ride on the "little bus", so I apologize in adavance if this is a lame question.
I have a table with two date/time fields. One for reporting the date and time of an issue start, the other for the date and time of an issue ending. I'm trying to find a way to get the number of hours between the two without including weekends. I found a module on mvps.org that excludes workdays. However it doesn't seem to work in this case. For instance, if I put in an issue start as 02/10/2006 7:30 am, and the issue end as 02/13/2006 6:45 am, it only counts it as one workday. It won't count the 13th as a workday until the time is >= 7:30 am.:confused:
I'm simply stumped. Any help would be greatly appreciated.
I have designed an access application that logs emails that come into a department. However, the team leader has asked me to create a report to work out if emails were answered within a 24 hour period.
Is there a method to do this. It is not something I have attempted to do within access before.
I am facing one problem while calculating the number of hours an employee spent in the office. Each employee will have a swipe card and the swipe data is stored in an .mdb file. Some employees will have different shifts and may come after 6pm and will go next day 5 am , while calculating their spent hours getting the problem. The swipe data is stored in IOData table , I wrote a simple query below to get the data., it is calculating correctly for the employees who come in between 11AM to 8PM but who are coming after 6PM and going next day , facing problem. Time is storing in 24 hour format in table with Status as Entry,Exit . There may be any no.of exits and entries , so i took min and max of the time in the below query.
I am attaching the mdb file data in an excel sheet(Master_Data.xls) and also the data of the below query(Swipe_Data.xls) and highlighting the employee for which we got problem.
SELECT HD.JobTitle, HD.HolderName, IO.IODate,IO.IOStatus, min(IO.IOTime), max(IO.IOTime), DateDiff("n", min(IO.IOTime), max(IO.IOTime)) AS Minutes, [Minutes] 60 & Format([Minutes] Mod 60, ":00") FROM HolderData AS HD, IOData AS IO WHERE HD.HolderNo = IO.HolderNo and HD.DepartmentNo IN ('0008', '0009') and IO.IODate between #01/20/2014# and #01/24/2014# GROUP BY HD.JobTitle, HD.HolderName, IO.IODate,IO.IOStatus;
I have a table of hours that have been worked by employees for each day of the week
[moh] (Monday's hours),[tuh],[weh],[thh],[frh],[sah],[suh] data eg (this is how I would like it to be inputted into the table) 7:24:00,7:24:00,7:24:00,7:24:00,7:22:00,0:00:00,0: 00:00
This equates to 36:58:00
I have tried
Total Hours: [moh]+[tuh]+[weh]+[thh]+[frh]+[sah]+[suh]
but I am struggling to get what I want in the right format.
How to record the initial data or a formula to format the end result.
Access Query. I am creating a time sheet / pay roll database and I want to be able to get a total of the daily hours in a query.
For example I have 'Mon Start' and 'Mon Finish' for Mondays in/out times and I have a 'Mon Total' which gives me the total hours worked for Monday.
The problem I have is that Mon Total only works if the hours are say between 07:00 and 17:00, anything after midnight (00:00) like 21:00 to 07:00 and 'Mon Total' goes crazy !!
At the moment 'Mon Total' is the result of CDate 'Mon Finish' - 'Mon Start' (bit rough I know).
Hi, i'm trying to calculate the amount of employee for each company giving me a total in the queries.. how do i go about this? I'm not an person who uses Access to solve this. I have amount 20 Companies stored and over 800's employee.. Here are the field in the table:EmployeeIDEmployeeNameNumberofEmployeeThanks! Hope this helps.
Hi All. I try to generate a report which calculate subtotal for patient AMOUNT for current year and total for whole period from first visit to current date. The result of subtotal =Sum(IIf(Year(Date()=[VisitYr]),[Amount])) is the same like total. What is a correct way? Thanks.
Say I have a table with ID's of people and a column with the hours they need to work on a specific day. I want to make a query where I get the total working hours for every person in that table for a certain date. The problem is that when a specific person in the table has no hours for a certain day he doesn't show up in the query if I choose that day.., is there a way to make sure that I get everybody's names for every day even if they don't have any hours on that day, but instead of not showing it would show a "0" instead?
Income | Outcome | Transport | Total Income | Date Total Income (N) = Income (N) + Transport (N-1) Total income equals income from that day + transport from previous day
Transport (N) = Total Income (N) - Outcome (N) Transport from previous day equals Total Income minus outcome
How can I calculate the transport from previous day to sum to next day total income?
I have two numbers, i need to calculate how much percentage of one is the other. E.g
num_1 = 100 num_2 = 10 percent = 10%
Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.
Actual Code
Private Sub cmdSubmit_Click() Dim intProposalTotal As Double 'if i use interger i get "overflow" error intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)
[Code] .....
billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.
I have a form that have textbox that calculate total and then i want to convert numbers to words. Iv got the code with function currencytotext but when i set the code source of another textbox to:
=currencytotext([inv_total])
I have an error. I saw this on internet but i think bcz I am using access 2013 may be the syntax is different a bit.
I am having trouble with this running total. Let's say I have a well. I am trying to create a running total that calculates the total Uptime (or hours operational) for each well every month.
I attached a PDF with an example of what I am working with.
Basically I have a report that shows any 'Issues' that wasnt closed within the KPI Target.
I have the report working, but I simply want to do a count of how many days the observations overran the 'Target Date of Closure'.
The report also shows observations that are not closed but passed their Target Date of Closure. These observations will not have a 'Actual Closure Date', but I would like to still have a count of how many days its overrun closure.
This is a formula I tried to piece together but obviously not correct as it's not returning anything;
IIf(IsNull([Issues]![Actual Closure Date]),DateDiff("d",[Issues]![Target Date of Closure], Date()),DateDiff("d",[Issues]![Target Date of Closure],[Issues]![Actual Closure Date]))
