Hi, I have never had to do any maths with access before, so I don’t know where to start!
What I need to do is calculate remaining warranty information for products.
In the table I have 3 columns. the 1st column is "Purchase date (dd/mm/yy)" 2nd column is "Total warranty period (years)" and the 3rd column is "Remaining warranty"
The 3rd column is the one that will display how long is left to run! How do I achieve this?
Thanks.
Apologies if this has been asked before but I have a problem with being able to format a field to accept an hours and minutes value where the hours is likely to be greater than 23.
I have a form that is related to the number of hours that people spend in respite care. Entry and exit dates are provided in a standard way - date and time - and I have a calculating field that calculates the number of hours and minutes that a person spends at the respite centre based on the entries made in the entry and exit fields.
Because the calculating field is based on a module and I need to have the calculated amount included in the table, I have set up a VBA code to copy the result of the calculation into a controlled field elsewhere in the form.
However, I also need the form to do a simple calculation whereby hours spent away from the centre are subtracted from the total hours calculated by the module, so I need the copied value to be in a format where the calcualtion is able to be performed.
In a nutshell I guess I am looking for a time format for the field that will allow the recipt of a value greater than 23 hours.
Of course perhaps I need a more sophisticated VBA script to perform the calculation behind the scenes but I admit to not being particularly at ease with VBA scripting. If anybody has any suggestions about either a format or a suggestion for a VBA script, I would be very appreciative.
Thanks in advance,
Chris Montgomery
i want to display time remainig on my quiz form
say quiz has a total time of 15 mins
so i want to show the time on my form
so the user know how much time he/she got
i did search th eforums but couldnt find any
sorry if it is here already
if it is can some on epint it for me
thanks in advance
I have a database being used to track and bill therapy units. I have a table that stores the pre-authorizations that tells me within a [start date] and [end date] I am limited with X amount of units (that is all the client's insurance and/or funding source will pay for within the time period). I also have about 4 different codes I can be authorized for which is also stored in this table - each code a separate pre-auth record.
Another table is where I enter in the type of therapy (service code) I've completed with the client. I put in the Service date, start time and end time and it will automatically give me the amount of units to bill (1 hour=1 unit). If I happen to choose a code or enter in a service date that does not match up with a client's pre-auth (Service date is between start date and end date and matches code from pre-auth table) I have a simple text box that says "No auth for this code or service date" due to an IIF statement in a query. I'd like to take this a step further and give me the remaining units for the pre-authorization left when it does find a match.
What is happening is when it finds the authorization, it's not taking into consideration all the services I've done for that time frame. For example: I have a pre-auth from 12/1/12 to 1/31/13 for code 90806 for 12 units. I served the client for that code a total of 10 units thus far. I can't figure out how to link my 4 service records dated 12/3/12 (2 units), 12/16/12 (4 units), 12/27/12 (2 units), and 1/3/13 (2 units) to add together and then subtract from my auth for 12 units. I know the dates are the key but I'm lost.
I have been trying for about 8 hours to calculate elapsed time between two fields into a third field in Access 2007. Unfortunately, the expression
IIf(IsNull)([Final Suspense]),DateDiff("d",[Routing Status Date],Date()),DateDiff("d",[Routing Status Date],[Final Suspense]))
is not working. Image enclosed....
I have a query call courses and field name expiry date I have add additional field within the query to show how many day left and how many days over the expiry date
Code : DayLeft:[expirydate]-now()
but i just get a error when i run the query
I also would like to ask is this possible to be done within the table e.g adding another field dayleft and some how add formula to calculate number days left or over due .
Code:
DateAdd(Interval, Number, Date)
function. More specifically, I am using a bound form with a table that I need the date for. The date will be an integer from a specific record (based on a search) from a separate table, and then added to the current day's date (in days).
I have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
View 8 Replies View RelatedI'm trying to step from Excel to Access and I have some issues to translate functions that I used in Excel to Access.This is how it looks in Excel.And I have issues to translate the following function in Excel to Access.
=IF(AND(I6=0),"Done",K6-A$4)
A$4 is related to cell where it states the function =now() Basically what I want is to calculate in the tablecolumn is the following.In the column "Days remaining" I want the remaining days from "date to pay" and today. If the amount states "0" then the outcome must be "done".
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code:
Private Sub Update_DOD()
Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset
Dim DOD As String
rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code:
CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only.
([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null)
How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
How to make a form open with data from a table based on a date and time in the/a table?
View 7 Replies View RelatedHi there,
I need some help with calculating login/logout times. I have an ODBC link set up for the raw data in AVAYA. The problem is that the login/logout times are reflected as the number of seconds that have passed since January 1st, 1970. I need to know what that amount in seconds is in a time format.
I have worked out the number of days difference between my rowdate and the start date of 01/01/1970 so I am left with how many seconds have passed since midnight of the selected date.
For example, the selected date is 3/7/07. The Login time is 5410 (seconds passed since 3/7/07 00:00:00). How do I figure out what time that was (hh:mm:ss)?
Any help would be greatly appreciated.
Rick.
Hello,
I have been struggling with this for 2 weeks now. I give up and am now going to ask for help. I am trying to calculate time.
I have been trying to do this in the query.
I have 4 fields
Start
Finish
Start2
Finish2
I need to figure out how many minutes total a letter was worked on. The reason for the 2 time sets is because they could start a letter and then stop and then come back to it later.
So I think what I need to do is figure out how many hours and minutes for the 1st Start/Finish set, then figure out the hours and minutes for the 2nd Start/Finish set and then add the two together.
Can anyone help me out here. Like I said I am at my whits end.
Oh the fields are formatted in the Date/Time data type.
Thanks
Becky
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName
FROM Staff INNER JOIN myTable ON
Staff.ID = myTable.StaffID
WHERE myTable.myDate >= #3/2/2014#
AND myTable.myDate <= #3/3/2014#
AND myTable.myTime >= #8:00PM#
AND myTable.myTime <= #11:00PM#
ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I'm trying to write a query to figure out the time something was delivered. I have the following information to work with:
Estimated arrival time: 13:00
Loaded Time : 14:00
Trip Time : 2.5hr - - how do I conver this to Hr's & Min.?
I need to subtract the ETA & the Load time and then subtract half the trip time.
Any help would be appreciated
Thanks,
I have a file that collects the time data of the shop employees. It records time in (start of day), time out (lunch start), time in (lunch end) and time out (end of day).
Sample of the table:
In/OutEmployee IDDateTime
0316 11/2/20067:00:34 AM
01244 11/2/20067:05:00 AM
1316 11/2/200612:00:43 PM
11244 11/2/200612:01:21 PM
0316 11/2/200612:30:43 PM
01244 11/2/200612:34:25 PM
1316 11/2/20063:30:46 PM
11244 11/2/20063:34:34 PM
0 = In, 1 = Out
How can I calculate the total hours worked per day(First In + First Out + (Second In + Second Out).
I appreciate any help.
I have the following feilds in a query: Timein Timeout
I need a subtotal feild that totals the two across midnight
I also need a Lunch feild
Then I need a total feild with the subtotal and total subtracted
I tried using this expression please help anyone if you can
Format([Timein] -1 -[Timeout], "Short Time") this created my subtotal feild
then I had a made lunch feild with 30 mins of time into it
then i tried Format([subtotal] -1 -[lunch], "Short Time") and called this one my total box.
The first one worked the second reported an error. Please any suggestions??
I have attached a really simple db where in a query I'm trying to determine the elapsed time between A sent date and a received date. Can some tell me what I'm doing wrong? Thanks..
View 1 Replies View RelatedHi, I wonder if someone can help me with the following problem:
I have a table with 2 columns,start time and end time, both containing time values in a four digit format, eg 0930 being 9:30am etc.
I have made a query to convert these into the standard format (eg 0930 becomes 09:30), using left/right and & functions.
Now I use the timevalue function to convert the string , eg 09:30m into a recongnised time value.
The problem is now I want to find the difference between the start and end times- but when i try a simple end_time - start_time formule it returns a long number which i dont understand, rather than just giving me the difference betwen the two times.
Im sure there is a simple way to do this which I dont know, can anyone help me out? Thanks in advance!
Hi, I wonder if someone can help me with the following problem:
I have a table with 2 columns,start time and end time, both containing time values in a four digit format, eg 0930 being 9:30am etc.
I have made a query to convert these into the standard format (eg 0930 becomes 09:30), using left/right and & functions.
Now I use the timevalue function to convert the string , eg 09:30m into a recongnised time value.
The problem is now I want to find the difference between the start and end times- but when i try a simple end_time - start_time formule it returns a long number which i dont understand, rather than just giving me the difference betwen the two times.
Im sure there is a simple way to do this which I dont know, can anyone help me out? Thanks in advance!
I need help to calculate time difference from the record above where ID is same. I have attached an example in excel with this request where I have if statement doing exacly what I want to do in Access. I have a table in Access that has three columns - as below
ID, Reg, TimeDiff
66646, 14/06/2007 21:33,
66646, 15/06/2007 06:03, 8:30:00
66646, 15/06/2007 12:20, 6:17:00
66646, 15/06/2007 15:08, 2:43:00
67844, 14/06/2007 04:39,
67844, 14/06/2007 09:05, 4:26:00
67844, 14/06/2007 09:08, 0:03:00
67844, 14/06/2007 16:27, 4:09:00
If ID is equal to the ID in record above then TimeDiff is equal to reg minus reg in the above recored, else blank.
Hope someone can help me with this.
Thanks, GS
i have a opened date[default value =Now()]
and
resolved date[default value =Now()].
i would like to calculate the time elapsed between the two dates. it is normally on the same day, but there are instances where it can run past midnight.
I have a combo box which looks up a set of values from a table, some of these I have got to store, others I merely want to work with and calculate from. These columns are:
DutyNumber
WeekendOrBHPayment
Sun-ThursNightsPayment
FriSatBHNightsPayment
OTRate
WRDRate
AHDifference
SKPayment
UnSocPayment
Now for most of these, I 'think' I have it planned where they will go or how they will be used, but the OTRate is flummoxing me a wee bit.
On the form, I have an OT(time) field - the idea being that the user will enter the hours and minutes of overtime they have done (short time format - is this correct?)
Then, I would like the form to calculate the cash value (has to be stored in a field) by multiplying the hours/mins worked by the OT Rate - - but I don't want to store the OTRate unless I really have no other option. Once the calculation has been done, if the Rate is then 'forgotten' then that is no issue, as the only time it would be needed is if the field is revisited to amend any errors (so I am thinking the calculation should be done as an After Update event on the OT(time) field?)
I run a Pass through query against a SQL-Server from Access 2010.I have a field TimeWorked which has values like 1899-12-30 03:30:00.000, for 3:30 hours and a field PaymentPerHour with values like 10.50 (for EUR 10,50).The result schould be 36,75 (36.75).
I tried to calculate like this: Round(convert(varchar,[TimeWorked],104)*1440*[PaymentPerHour ]/60,2)AS TtlPayment
In an Access query it works with the connected table in the accb, but not against the server.I get a lot different errors when trying to convert into int, datetime, etc. but could not solve my problem.