Calculation On Previous Record
Nov 14, 2005
Hi, I'm wondering if anyone can help me with this query. I've had a look at some of the previous posts under previous record, but don't seem to be able to get to the bottom of it:
I have a set of data on employees who have all had one or more financial searches done on them and I want to return a field based on the previous record of that employee.
My data is as follows
Search ID----Employee ID-----Search Result
1-----001-----P
2-----002-----FCCJ
3-----002-----FCCB
4-----003-----P
I would like an extra field that looks at the previous row, decides whether or not the previous row is the same employee id and if it is returns "Same" and if it isn't returns "Different"
Thanks
View Replies
ADVERTISEMENT
Oct 4, 2013
I have partially done it using PrevRecVal module I found on the web.
I created what I need to do in Access in Excel first, the problem doing this in Access (for me) is I need to refer to the results in the previous record, PrevRecVal worked but I need to finish if possible.
The main report holds client policy data of which InvestAmount is used to start the calculation of the sub report, the data entered to run the calculations on the subreport would be
QtrDate
CurrentUnitPrice
The Excel spreadsheet is attached ....
View 10 Replies
View Related
Aug 2, 2013
I have a table full of meter readings. I want to have a field called consumption which looks at the reading just entered for that month and then subtracts the previous months reading for that meter which leaves the consumption.
Can I get a formula that can work this out automatically?
View 3 Replies
View Related
Jul 12, 2005
I am building an application for a small clinic. In the interests of good database design, I don't want to be storing numbers that are derived by calculation.
A patient with insurance will have a deductable that will be entered into a field on their first (ms access) transaction form.
A calculation will put the remaining deductable into another field. No problem.
However, the NEXT visit has to look back to find previous transaction records, again perform the initial calculation and then perform another for this transaction, and again the next time and the next until the deductable reaches zero.
Additionally, since I'm not storing these values, if I pull up an old transaction form, that form has to re-perform the calculation ONLY on transactions from that date and earlier. It must not reflect visits that took place later.
So, this field must query tblTransactions, filtered by the name of the patient (a combo box called tblTransactions.Patient_Name that looks at tblContacts), the transaction date/time (stored in two date/time fields, cleverly named tblTransactions.Date and tblTransactions.Time), and the total deductable value stored in a field called tblTransactions.Deductable.
As someone who has never coded anything more complicated than DOS batch files, I'm at somewhat of a loss as to how to go about this.
Any assistance, code-wise and which Property value to put it in would be MOST appreciated.
View 1 Replies
View Related
Apr 30, 2007
I need a way to dynamically store a particular value in "field_2" of the CURRENT record depending on whether or not the value of "field_1" of the CURRENT record is identical to the value of "field_1" of the PREVIOUS record within the same table. The table is sorted on "field_1".
So, if the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is also "ABC", then store a value of "PPP" in "field_2" of the current record. IF on the other hand, the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is "XYZ", then store a value of "WWW" in "field_2" of the current record.
I have a report that will use these results to count only the number of records that have a "WWW" in "field_2".
Is this doable, maybe in a query somehow?
I should add that whatever the solution, it needs to be compatible with Access 2000.
View 1 Replies
View Related
Apr 29, 2015
How to fill values in a new record with data from previous record?
I've total 11 columns in a table and values in 3 4 columns are repeating for few rows before it needs to be changed eventually. I want to fill these rows with values from previous record.
View 10 Replies
View Related
Aug 26, 2013
I need to know how to auto enter the date of the previous record into a new record. I have this db for my vehicle log sheets and I submit monthly a claim for the business km from my company. I usually cant remember the date of the previous claim and have to scroll back until I find the field with a date. It will be useful if the date was copied into every new record until I edit the date when I submit the claim. What I ask is during the new month all the dates will be the same until I submit the claim. I do not know how to do this, and yes I have done a search.
View 3 Replies
View Related
Aug 8, 2014
I'm struggling with a query to evaluate current and prior record data. I have a query producing 5000 records. I need to group records by Case ID and compare current date record to previous date record to determine if a team and worker name has changed during the year. I need to count how many times a cases is transferred to and out of a particular team from the beggining of the year. i.e., On 1/1/2014-Team1 has an inventory of 500 cases.
During the month 25 cases are transferred into Team1 and 15 cases are transferred out of Team1. So on 2/1/2014 Team1 begins with an inventory of 510 cases. Throughout the year cases come and go from and to Team1 each month so need to figure out how to create a query to count each change. See attachment displaying how the data is listed and how I invision it to work with the In/out column counts.
Specifically, at the begginig of the year (1/1/14) for case ID 1003 you can see it belongs to Mary in Team1 for January and February. Then in March the case is transferred out and went to Joe in Team 3. So for Mary a "-1" is recorded as a negative count for that Case ID. If later in the year the case is transferred back to Mary a "+1" would be recorded. Respectively evaluated for each of the 5000 records to get a total count for each of the teams by Case ID throughout the year.
I've started with DLookup, tried comparing current month to previous month using DMax. It works as long as I only select one case ID used in a separate query but if I use the whole subset (5000 records) it fails. I can't figure out how to group each set of case IDs and then apply the query.
My attempted query: DLookUp("[Team]","[Team_qry]","[Team_qry]![Date]=#" & CStr(DMax("[Date]","[Team_qry]","[Team_qry]![Date] <#" & CStr([Date]) & "#")) & "#")
View 3 Replies
View Related
Nov 17, 2010
create a macro that automatically fills in the next invoice number in sequence",,I'm assuming this macro would look at the value of the previous record and add a one to itI don't want to use a AutoNumber field as I might need
(a) to modify value or
(b) need to skip numbers.
View 8 Replies
View Related
Sep 15, 2005
In my query, i want to automatically display the value of another field from the previous record in a field in my current record. i.e.
Name Value Previous
Record 1 1
Record 2 2 1
Record 3 7 2
Record 4 1 7
Is it possible to create some kind of simple expression to refer to data in another record?
Cheers,
Ben
View 6 Replies
View Related
Apr 11, 2013
I need to add two previous record fields together in a query. I have attached a picture to illustrate.
The "StudyYears" filed is the primary key of the table the data is being pulled from. The zero's are placeholders for the sum of the previous record's data.
RunningBalance is calculated as follows:
Code:
RunningBalance: IIf([a].[StudyYears]=[ReserveParameters]![StartingBalanceYear],CCur([ReserveParameters]![StartingBalance]),0)
Bal is calculated as follows:
Code:
Bal: [AnnualContribution]+[InterestIncome]+[Inflation_Adjusted_Expenditures]
How to go about adding the two together as in the picture?
Is there a way to do this relatively fast, as well as keeping the query updateable?
View 1 Replies
View Related
Feb 20, 2014
How do you compare one record to the previous record? I have a query that shows items sold. It is sorted by day with today on top. I would like to create a column that has a 'thumb up' or 'thumb down" if todays was a better day than yesterday.
View 1 Replies
View Related
Jul 16, 2006
Is there a way I can grab the previous record's value without using dlookup? I am trying to create a running total in a datasheet view. e.g.
Date Credit Debit Run. Tot.
6/1/06 $25 $0 $25
6/4/06 $30 $0 $55
6/9/06 $0 $50 $5
I could do it by using an autonumber but the data is sorted by date and not by the order in which it was entered. Suggestions? :o
View 4 Replies
View Related
Apr 13, 2007
I have an inventory report that I am given among the fields are
Item, Ship Date, Signed Quantity, Filled-Recvd, On Hand
I am given an initial amount in the onhand field but the fields below that for that item are blank.
What I would like to do is [Signed Quantity] - [Filled-Recvd] and then add that to the On Hand from the previous record and place it in the on hand field..
If it were in excel I would say G2 – H2 + I1
G = Signed Quantity
H = Filled-Recvd
I = On Hand
TIA!
Scott
View 1 Replies
View Related
Aug 11, 2005
I have a Motorhome which I want to check it's Fuel Economy, seems simple!
I record the odomiter readingwhen I fill up with petrol and the amount of petrol pumped in to fill tank and the cost
I have done it in Excel 97 but I would like to convert to an Access 97 Database.
The purpose is to open an Access Form, add a record with Three Fields, namely the odomiter reading, Amount of Fuel pumped into tank, and Cost.
I would then like Access to subtract the previous record's odomiter reading from the new odomiter reading to obtain the distance traveled since last fill and using this number and the other 2 fields I can calculate my fuel economy
I tried to attached the Excel (97) spreadsheet for your information but it was too large for this forum
The calculations are based on Australian Dollars, LPGas and Litres but it would make no differance if it were Gallons, US Dollars etc.
I would very much appriciate a note to tell me if anyone is able to assist me with this problem.
Thank You
Paul Leaver
Glenview
Queensland Australia
rpleaver@bigpond.net.au
View 10 Replies
View Related
Jan 10, 2007
Is it possible for me to specify the default value in a table as what was inputed in the previous record?
View 12 Replies
View Related
Apr 2, 2005
I'm a novice with Access but I thought I would use Access rather than Excel to record fuel use for our vehicles because the reporting functions should be more powerful.
I have set up a table where I input date, vehicle, member of staff, mileage of the vehicle and the cumulative reading from the fuel tank meter. I thought it should be simple enough to calculate the fuel used each fill by taking the meter reading away from the reading on the previous record, but I cannot find a way of getting Access to do this.
I am missing something obvious or not?
Thanks,
Henry
View 1 Replies
View Related
Mar 4, 2007
Hi
Im wanting to set a default text from a previous record.
I have a fields that has Start location and Finish location,
Im wanting to set a defaulf so that the Finish location from the previous record is defaulted to the Start location of the next.
Is this possible????
Please help.
View 9 Replies
View Related
Jul 11, 2005
:confused: I am trying write a select query to find the past age of the records based on a dated field "consigned date" and select only those records over 10 days old. I would like the user to input the date in time that will be used for the calculation reference. When I try this Access tells me the function is too complex. The query works when I change the user selected date with "date()" but this only give me the current age of the record not the age it was at a previous date. I would like to sum all record older than 10 days old from a user inputted date. Can someone please help I have exhausted my Access capabilities.
My code looks like below:
Records over 10 days: Sum(IIf([user input date]-[Consigned Date]>=10,1,0))
This one give me the current age.
Records over 10 days: Sum(IIf(date()-[Consigned Date]>=10,1,0))
View 14 Replies
View Related
Jun 23, 2005
Ive added my own navigation buttons as I needed to add some code to them, but when a user gets to the first / last records & presses previous / next record, they get an error message 'cannot go to the specified record' and have to close & reopen the form.
It's prob. quite simple, but how do I get round this please?
View 4 Replies
View Related
May 23, 2006
When I click my command button that says, "New Record", I want it to go to go to a new record and populate the field "Town" with the value in the previous record.
e.g. ClientID on last record is 150 and has Town="London". Click "New Record". New record created. Town field on ClientID 151 has Town="London".
How can I do this?
Thanks,
Dave
View 3 Replies
View Related
Jul 3, 2006
Hi there, I'm trying to make a form which calculates the annual depreciation value of a property. I have tried using the PrevRecVal function and I even made the following query:
SELECT Last(PropertyDepreciation.[Total]) FROM PropertyDepreciation WHERE (((PropertyDepreciation.PropertyID)=(Forms!Propert yDepreciationSF!PropertyID)) And ((PropertyDepreciation.PDID)=((Forms!PropertyDepre ciationSF!PDID)-1)));
But still no luck. I made a text field called PreviousTotalValue to see what sort of information was being returned by the query and PrevRecVal and for both, #Name? is returned.
Any ideas fellas?
Bob
View 3 Replies
View Related
Dec 17, 2006
I have still not solved the problem wich is doing my head in!!!
In the following DB I have the "frm1" wich the value of the first record for "Value1" is 10 when I pass to the second record Iwould like to show automatically the value 10 in the field "Value1" this for all the records untill I change toa new value so from then on it will show the new value.
I believe is the Dlookup function, but I have not find the way to make it work.
I must be thick but I need your help!!!!!
Thanks
View 14 Replies
View Related
Jul 31, 2006
Is there way to have one or more of the fields in my form filled with information from the previous record? For example - If I am taking a gas pump reading at night and I want the form to subtract the start (last nights reading) from tonights reading to calculate total gallons sold for the day
or similarly I want to make a form to take starting cash, add sales, subtract payouts and deposits and come up with what ending cash should be... Do I have to put starting cash in manually each day or can I have it autofill from the previous record?
View 6 Replies
View Related
Apr 16, 2007
Can anyone tell me how do i move to the previous record in the database using asp. i have tried the following
Code:rs.moveprevrs.moveprevious
hint's will also help
View 1 Replies
View Related
Apr 12, 2006
Hi
I need to copy some data from last record to next(New record), when a user clicks a button on a form. I don't want to copy all the data.
An example would be booking in items from an invoice:
Company would be the same
Invoice number would be the same
Product code would be different
quantity would be different
Hope this makes some sence, and i'm not being stupid:rolleyes:
Andy
View 1 Replies
View Related