I am using an Access form that I created on an earlier version of Access and I have been able to insert (add) new records with this form and database.
Recently, I added some text, moved some text around on the form, and saved the form.
Sense my revisions, I am unable to insert (add) new records. (The "New" button in the software's header is grayed out.)
I have saved and compacted/repaired the form/database, but this did not solve my problem.
May I insert a record into the top of a table?
Please help me! Thanks very much!
My email: jokelogpop@yahoo.ca
Hello
I have created a table of Some machines specifications.
Item Name Type location
1. Sieve156 Sieve 3rd floor
2. Rollermill1 Mill 1st floor
....
...
...
When inserting for example a new sieve machine I want database
add automatically this machine between items 1. and 2. and assign the item
number 3 to rollermill1. but this new record is added to the last row and its
item number will be 3 but it should be 2.
What shall I do for this problem? (in excel it is easily possible to add a row
between two rows.. is it also possible in access?)
thank you
Hiya,
I've inherited an Access 2003 database, a rather complex one. The database has a login, with the credentials stored in a table which I can view (minus the pass, which is masked). Of course, for security reasons, I shouldn't be able to just add a record and create a new ID, in essence bypassing all security. As such, the table with the user records does not permit new records to be added. What steps need I take to add new records, the option being greyed out in the interface, no new record bar available at the bottom of the table.
Any insight is most appreciated.
Slawek
In my VBA code, i am trying to move some table records from table1 to table2. Both table1 and table2 has exact structures.
In the INSERT statement for table2, what is the easy way to insert a record from table1? I am trying to avoid having to specify each field name in the INSERT statement. Because, i have 100 fields in table.
Is there a way to INSERT a particular record from table1 to table2 without having to specify field names in the INSERT statement like in below example?
INSERT INTO Employees " _
& "(FirstName,LastName, Title) VALUES " _
& "('Harry', 'Washington', 'Trainee');"
Using the sql profiler gives me no clue.
This is the insert query from the profiler.
exec sp_executesql N'INSERT INTO "ENVIS_GSD".."wat_springflow" ("result_dt","site_id","result_va","remark_tx") VALUES (@P1,@P2,@P3,@P4,@P5,@P6)', N'@P1 datetime,@P2 int,@P3 float,@P4 nvarchar(4),@P5 varchar(3),@P6 datetime', 'Feb 10 2009 12:00:00:000AM', 3000723, 8.000000000000000e-001, N'test'
The two records that I get the proplem on are not included here, but somehow they have been updated. I traced the access code, but I could see no reference to them that they were used for the update in either the form or any modules called.
Somehow up to a few weeks ago those two columns were updated.
Tracing the code and using the immediate window the user_name variable stores the login name corectly.
Someone mentioned "error 28" any ideas?
Thanks in advance
Hi folks,
I have an Append Query (Insert Into...) that I use to insert values into a table from a form. But to have that tie into other tables I need to gather the Student_ID (primary key) that is autogenerated when the record is inserted. How do I do this? I want to store it in a public variable. I've done quite a bit of searching but nothing of any value has turned up. Please help.
What I have on button press:
DoCmd.OpenQuery "Register Camp Students"
After that I need something to gather that newly inserted Student_ID and store it for later use. Please help!
Ciao,
jawilli1 :confused:
Hi guys. I hope someone replies to this thread....I am struggling with this one.
I am developing an Asset Management System for our IT Equipment.
We wish to record the software installed on each PC.
The Manufacturer and Software names are stored in separate tables.
The AssetMain table has a one-to-many relationship with the AssetSoftware table.
I originally had a (continuous) subform for software on my main Asset form. However, as I am using cascading combo boxes (to filter the Software Combo by the Manufacturer) it mean that changing the combo on each record would appear to change the existing values too (common problem).
I would therefore like four unbound controls.
1) Combo Box - Manufacturer
2) Combo Box - Software Package
3) Combo Box - Package Edition
3) Text Box - Serial Number
When the user selects/enters these values and clicks an "Add" button I would like add a new record into the AssetSoftware table where Asset_ID = Parent.Asset_ID.
I will then have a list box that queries the software for that particular Asset. This will requery on each CmdAdd_Click.
Attached is a screenshot of what I would like to achieve (if I click Add it should add Microsoft Office XP to the list box below)
Would really appreciate some help (do not normally get many replies to my threads :( )
Thanks
BF
So, I have a table with an autonumbered key field. I started the autonumbering at 1000 thinking that I may want to manually backfill some old records at a later date. Now I’m stuck.
Is there a way I can insert a new record into this table, filling this field as “950” for example?
Creating a flight management database to create flightplans that determine local/zulu times and dates of each leg of the flight. Arrival and departure times are calculated by durations entered for flight time to get arrival information, and time on the ground to determine departure time/date.
My question, is there a way for the user to insert a record (leg) into an exisitng flight plan that they are editing? The legs are currently in order by an autonumber so inserting a new record would not necessarly put the legs in the correct order of the flight.
Currently, the user only needs to enter the airport identifier and air/ground time along with initial departure time/date. No dates are needed for each leg.
Thanks
after I insert a new record using INSERT INTO and then use DMax() (in a private sub) to look up the new record. About half the time DMax() pulls the new record based on the primary key field (AutoNumber) just fine. However, half the time it pulls the max record prior to the new record being inserted. I.e. record 1001 was added and DMax() pulls record 1000. I'm assuming that my issue has something to do with the timing of when the record is writen/saved in the table. Is there a simple method of refreshing the table that I can use prior to using DMax()?
View 2 Replies View RelatedI have 2 table and the relation between the 2 table are [Booking_Num]
Code:
table A: [ID],[Booking_Num] [Prod_Name],[Qty_Order]
table B: [ID],[Booking_Num],[Prod_Name],[Date_Out]
when I get insert to table A, should be the table B get many record base on [Qty_Order]..?
sample:
Code:
table A
ID | Booking_Num | Prod_Name | Qty_Order |
01 | BOK001 | Hammer | 4 |
table B
ID | Booking_Num | Prod_Name | Date_Out |
01 | BOK001 | Hammer | Null |
02 | BOK001 | Hammer | Null |
03 | BOK001 | Hammer | Null |
04 | BOK001 | Hammer | Null |
Hello all!
I have a database that needs to post records that are joined from three different sources into a table. The query is done, and I get about 1,489 records out in 4 different states.
What I need to do is make a table with these records. Furthermore, it must be separated by state, whereas if there are less than 1000 records for each state, it must insert blank lines until it reaches then next thousandth (sp?) row (i.e. 1001, 2001, etc.), and then start posting the next state.
For example, AZ has 420 records. There has to be 580 blank lines before the query can start posting the next state, CA. At row 1001, CA starts posting, but there are only 200 records for CA so there must be another 800 blank lines before moving on to CO at row 2001, etc. etc.
Anyone have any ideas on this? Thanks!
Hi All,
I hope somebody can help me on this.
I still use Access 97.
I have 4 tables that contain a vehicle registration number field as their primary key and have one-to-one referential integrity applied.
I want to add a new registration to all 4 tables from one query. How?
I've tried many permutations with no success, such as putting the registration on a new table and trying to apply this to the 4 RI tables. I keep getting ref intergrity violations. Obviously I could disable the ref integrity rules, update the tables and then reapply the rules, but this is not possible if I am going to make the database available to a user group. A new registration needs to be added seamlessly. By not having ref integrity could leave the DB in an inconsistent state.
Help! If what I want is not directly possible, then any work-round would be appreciated.
Thanks in anticipation
Richard
i am using this query to insert the previouse balance into arrears as shown in the figure. it will insert some record correct and some are not correct.
SELECT fees.[gr no], sum((Admission+Registration+Fees.Tuition+[Fine]+Fees.Transport+[Exam]+[Misc])-Fees.Paid) AS bala
FROM fees
WHERE fees.balance<=0 and [gr no]=[gr no]
GROUP BY [gr no];
i insert a button that delete current record but i want when click on button the following message will not appear.
View 1 Replies View RelatedIs anybody can help me to solve problem with inserting empty record between two records in unordered (non-indexed) table - like in Excel work sheet.
Regards,
Gennady
I currently have a command button to run the following...
DoCmd.OpenQuery "Credit Card Report", , acAdd
Which is an appended query.
However, I don't want it to add the whole table each time this is pushed but when trying to use...
DoCmd.RunSQL "INSERT INTO [Credit Cards] ([Provider's Name], [Patient Name], [Patient Account Number] ... VALUES ([Provider's Name.Value], [Patient Account Number.Value], [Patient Account Number.Value]"
It doesn't want to add the single record and gives me an error. I'm pretty sure my syntax is wrong but not sure how to correct it.
The fields I want added are ... Provider's Name , Patient Name, Patient Account Number...
I have two tables "TABLEA" and "TEMP"
fields in both tables are
Cust ID (Primary key)
Cust Name
Address
Cheque No
Amount
Location
Zone
I need query when i click on command button on form
if "Cust ID" which is primary key in "TEMP" Table match with "Cust ID" from "TABLEA"
It will update the record in "TABLEA" if not then append the record
I have a sub table that acts as a revision history for the items in my main table. I've just finished uploading all the records into the main table and now I want to insert one record into the subtable for each record in the main table to start the history with the record creation.
The sub table looks like this:
tblRevisions
- RevID (auto Number / primary Key)
- RevDate (date of revision)
- RevName (Who made the revision)
- RevDesc (What revision was made)
- RevAuthorized (Who authorized the revision)
- RevLabel (Foreign key to the primary table)
The info I want to insert is:
RevID - Auto Number
RevDate - 11/27/2013
RevName - 3
RevDesc - "Added Label to database"
RevAuthorized - 1
RevLabel - (One for each record ID in tblLabels)
I suspect that I want to start with an insert into statement, something along the lines of:
Code:
Insert into tblRevisions (Revdate, RevName, RevDesc, RevAuthorized, RevLabel)
Values ("11/27/2013",3,"Added label to database", 1, ?)
I'm not sure how to indicate that there should be one label for each Record in tblLabels or that revLabel value should match the ID from tblLabels though.
I have three tables which I have linked with relationships. The linked fields are given the ID number of the parent, where I wanted the value. What on earth am I doing wrong, something stupidly obvious I bet! Access 2007
View 3 Replies View RelatedIf a new record is created, insert date only if customerID is not null
Private Sub Form_Current()
If "CustomerID", "TblDietPlan" = <> 0 Then
If Me.NewRecord Then Me.MealDate = DMax("MealDate", "TblDietPlan")
End Sub
I'm tracking the holiday entitlement of a team of people. I use a query to work out how much unbooked holiday they have to take.
My problem is where I'm scheduling next year my query returns the names of those who have booked a holiday and their remaining entitelement. That's as it should be. However if someone hasn't yet booked any holidays then it simply doesn't display their record. I would like it to treat that record as zero and show the remaining entitlement as a full years entitlement.
Here's the SQL
SELECT Employees.Trainer_Name, Sum([2015 Holiday].[2015 Days]) AS [SumOf2015 Days], Employees.Holiday_Days, [Employees]![Holiday_Days]-[SumOf2015 Days] AS 2015
FROM [2015 Holiday] INNER JOIN Employees ON [2015 Holiday].Trainer_Name = Employees.Trainer_Name
GROUP BY Employees.Trainer_Name, Employees.Holiday_Days;
The problem here is that the Sum of 2015 holiday is Null
Do I somehow need to create 0 hours records?
I am attempting to insert a record with selected data into a temp table and I am getting "Run-time error '3075': Syntax error in (comma)...". Here is the code:
Code:
Private Sub XferDataToTempTable()
Dim db As Database
Dim strSQL As String
Set db = CurrentDb
[code]...
I have a sub form with staff records on it within a main form. I am trying to allow the user to select a record from the sub form and add it to a table, here is my code which, to me, looks correct. However it gives me an error saying "Syntax error in INSERT INTO"
Code:
Private Sub Command3_Click()
Dim dbs As Database
Dim sqlstr As String
Set dbs = CurrentDb
Forename = Nz(Forms!frm_Capex_Submission!frm_staffSub.Form.shy_forename, "")
Surname = Nz(Forms!frm_Capex_Submission!frm_staffSub.Form.shy_surname, "")
[Code] ....
I am at work, and I have acquired a database that prints labels. They now want the database to be coded so that after certain labels are printed the database will print a blank label. I have the code figured out as a Do While statement in order to print the blank label. The problem I am having is that I am trying to use the Insert Into command to insert the filepath into the table that adds the blank label.
|DoCmd.RunSQL "INSERT INTO Rod_tmakLabels ( Print, [Order] ) SELECT Yes AS Expr1, 'Rods Labels' AS Expr2"|
If I run the above command, it just adds the text "Rods Labels" at the end of the table. Is there anyway with the INSERT INTO command that I can insert the new label between the 2nd and 3rd row and add another row? Or is the command designed only to add a new row to the end? I haven't had any luck searching for this yet.