Hi,
I just went through the User-level Security Wizard and added security. I now can't log on using a username I created.
How can I get my database back? I have the back up file but how can I get all the stuff back without this security on the database?
PLEASE HELP!!
Cheers
Bizzy
Hi,
I've created a duplicate of our database in order to be able to work on the design of it from several locations. At present the database which is being used has been split into FE (on local machines) & BE (on server), with a .mdw file for the workgroup settings.
For the duplicate I have created a new database with all the Tables, Queries, Reports, Forms, Macros and code copied from the FE & BE files into a single file. My question is, to be able to work on this from remote machines / pass it on to others to work on the design, do I need to have a copy of the MDW present with the duplicate, or is it possible to remove the workgroup and security permission settings?
I have created a database and made the steps to the user-level security and VBA protected the project but i lost the passwords and the MDW file.
is there any way to reset the VBA pass then reset the security level?
this is very important for my business it's a school database with lots of info and it's critical for me to update or at least export some reports and forms to a new project
I've read and gone though quite a few of the scrips and examples for creating logins and security and i'm getting to the stage when i need to have good understanding of the different methods.
Some of the examples whilst create a user login do not really allow for security within the database whilst the build in security wizard would appear to offer that functionality.
I am thinking that I will use the Workgroup file and that method. My question is am i able to utilise the fact that if a person 'AdamA' logs onto the database which is built into the workgroup security file. am I then able to take 'AdamA' to populate a table which records actions by a user? (I can't seem to find any thread or book reference to doing this)
Is it possible to do this through vba. If security is setup for all the tables and a user goes in and creates a new table, can that table have security applied to it using code?
So maybe the creator of the table has read/write privileges but everyone else only has read only.
Hi i have created a plotchart and at the bottom of the chart it is displayed as SUM of SUM of apr 05 etc for all the months is there anyway i can remove the sum of before each month??
thanks :)
Hi
Need a little help with the following, running windows ME on a Compaq Presario Desktop, connected to Blueyonder Broadband, Blueyonder have provided a new anti virus and firewall package free of charge to broadband users, you need to remove your existing Virus and firewall package(McAfee) to load the new, which I have done, it appears that I still have remnants of a previous Norton Firewall, the only reference to it is when you access through the control panel and the add/remove programme, I have tried many times to remove it but the text is still there.
I have searched for it but nothing comes up as found.
Many thanks
Derek
I have an enormous Post Code Table 1.7 million records, which I must update every month into usable sectors for our carrier cross refs, the UK postcode is in the format CB6 3HQ, CB6 3HR, CB6 3HS, CB6 3HT, CB6 3HW etc I need to be able to remove the space then only use the first 4 chrs ie CB63, in the above examples I know I could do a search and replace " " with "" but I need this to be run automaticly where would be the best place to do this and if coded how?
Any help or alternative suggetions appriciated
:confused: I am importing a file from excel into access. The table has about 6300 records. Some records are duplicates or even triplicates. How do I write a querie to leave only 1 of of these records and rmove the duplicates.
Second, I will be importing new files weekly that after I do the above I will need to append to the first table and then remove duplicates. How dod I do this.
thanks
Hi All,
I have one serious emergency.
I have 2 options (2 qeustions) in front of me.
[1] How can I remove primary key and not the column
[2] How can I rename the column which is primary key.
Please help me.
Thanks in advance
Jigs
I have an access database and table name called student. The table includes field name such as identification_id and registration_no. The value in identification_id is 3434-34-213 and registration_no are 234/45. Can i query the field name so i can get both value without the sign - and / so the output will be 343434213 for identification_id and 23445 for registration_no?
View 5 Replies View RelatedHi,
i want to replace spaces in my query, but there are a few hard parts in it.
I dont always know how many spaces. en second, the spaces that need to be replaced are after the first character. The rest needs to be removed.
i have:
----1----1----2
the "-" are spaces!!
and i want it to show
1.1.2
this is what i tried replace([MinutesID];" ";".") & " - " & [minutesTitle]
can someone assist...
thanks
Hello, Tried a search but could'nt come up with an answer.
I have a number field with an amount.
The format will always change as far as the LEN is concerned.
I need to remove the decimal.
There will always be 2 numbers to the right of the decimal but the left will always change.
Example:
21543.11 Need 2154311
11.20 Need 1120
Thanks in advance! :)
I have a big table with belgian tax numbers all in this format:
BE 401.031.867
I would like to remove the "BE" and the "." which are in this field so i have only the numbers.
Cant figure it out myself, any help would be greatly apprieciated
I have a query linked to a main frame database. One of the fields is [significance] and gets a number 1-20. Usually when this data is entered, it gets multiple significance numbers. This causes my query to return separate records for each significance number. For example if case number 123 is given significance codes 1, 5 and 12, then my query returns 3 records.
I need a query that will show all records one time that have a significance code other than 12. This would be easy if there were not duplicate entries for the same case number because I could simply say "Not 12". So in the example above, my query returns 2 records showing significance codes 1 and 5. But I don't want to see the record for case number 123 because it also has a 12 significance code.
So what is the best way to handle this?
I appreciate the help.
Jim
If have a table with billing occurances and one of the fields is "business name" how would I need to setup a make table query which lists unique occurances within that data?
Essentially, I want to remove duplicates. If ABC Pet Store has 5 billing occurances and XYZ Pet Store has 1... I want both to only be listed once.
I hope that makes sense. Thanks for any help as to how to set this up!
Hi,
Is there a way that i can remove the space in between the cahracters of the string.
like: 78- ASDGFKGJ OR 78-SJDHF AJSDFH TO RESULT IN 78-ASDGFKGJ / 78-SJDHFAJSDFH
THANKS SO MUCH
Is it possible to remove a filter using VBA.
I need to remove a filter on a form when a user clicks on a drop down box.
Hi
When I filter on a form on our database, I cannot then remove this filter. In order to continue working i have to exit the database completely!
Please help!
I would like to remove duplicates from the following query. I would like it to display only one record depending on the InvoiceID. So only show one unique record based on Invoices.InvoiceID. Thanks!
SELECT DISTINCT Invoices.InvoiceID, Invoices.CustomerID, InvoiceDetails.InvoiceDetailID, Invoices.InvoiceDate
FROM InvoiceDetails INNER JOIN Invoices ON InvoiceDetails.InvoiceID = Invoices.InvoiceID
WHERE (((Invoices.InvoiceDate) Between #8/1/2004# And #8/31/2004#) AND ((InvoiceDetails.DeliverBy)=0))
ORDER BY Invoices.InvoiceID;
Hi,
I need to remove the automatic (empty) new row that access produces under the last record in the table, because i
would like to remove it when i view a query.
Could any of you kind people suggest a way that i could do this??
thanks for you help.
Is there a way to remove the design window from your project ?
I have made a program but, the problem I am having is that when
I run it and say the query results show up I close that window and
then the design window shows up. I need the close button on the
other windows but I need to block out the design window when I
use the program.
I also know about the start box where you can uncheck items and
they are removed. Am I missing something ?
thx
I was hoping someone could let me know how I can convert my MS ACCESS database file (.mdb) so that when user(s) run/open the database, they cannot see, nor have access to the tables (which are linked from a separate DB with just the tables), forms, queries, etc... (the elements). Right now, you can open the file, the switchboard runs, but you can still see and navigate to the tables/forms/queries seen in the background.
Is there a quick and simple way to turn this into an executable-type file where you cannot see the elements in the background?
Hi everyone, does anyone know how to remove the little replication icons next to the db objects when a replica is converted back to a design master. I know there is a way cos i've seen it here before but I can't find it searching. Thanks.
View 2 Replies View RelatedHello,
I have a lot of values that look like this: 0.524, 0.673, and 0.398. I hate to look at these numbers with the zero before the decimal point and would like to find out how to remove them. I know that it's possible in Excel, but I'm not sure of how to do it in Access.
Is this possible?
Thanks
I am using Access 2003 - by default there is a 'Type a question for help' drop down box on the menu bar - this is a tad annoying and looks similar to the 'New Mail' icon that displays from my mail client in approximately the same part of the screen....
Any ideas on how to remove the 'Type a question for help' drop down from the Access Tool/Menu bar?
Thank you.