Hi folks,
I have a crosstab query that counts the number of records that each employee has.
I need to be able to specify the date range to show though and the query won't let me use:
"Between [Type the beginning date:] And [Type the ending date:]"
I've attached a snapshot of my query design and output.
I've tried everything I could think of!!
hi, how do I select my data where the date is beyond the date range specified? For instance, I wan to select all the rows except the rows that are between 3/22/2005 to 10/17/2005. Is it possible to select the query? I tried the condition 'where date < #3/22/2005# and date > #10/17/2005#', but it return no rows at all. Does anyone knows how to do smth lidat??
View 14 Replies View RelatedHi all, I need to extract in a query a recent range of records, these records should be all before a certain date and all the following future records example:
if today date is 12/12/2007 I need to extract all records that are dated from the 1st of november and all the records that come after the 12/12/2007.
In the criteria I have set "Date()" what else should I be adding to get the range mentioned above?
Thanks
I'm using a form to select a date range. Using the following, and entering start date of 6/1/14 and end date of 7/1/14 I would expect to pull the records with a date of 7/1/14; however it doesn't. I have to enter and end date of 7/2/14 to pull 7/1/14 records.
>=[Forms]![F_Transaction_Date_Range]![txtStartDate] And <=[Forms]![F_Transaction_Date_Range]![txtEndDate]
I am trying to create a form that will select records by date range. The form contains 2 textboxes, with pop-up calendars to select dates. I managed to come up with this code, however, it's not working. Whenever I run the code, my database just goes blank, as though it's selecting something that is not in the records.
Code:
Private Sub Command16_Click()
Dim Task As String
Dim startDate As Date
Dim endDate As Date
startDate = Me.Text12
endDate = Me.Text14
Task = "SELECT * FROM Final WHERE Final.Timestamp BETWEEN #" & startDate & "# AND #" & endDate & "#;"
Me.RecordSource = Task
End Sub
How does one actually do the date range search? Could it be because my timestamp actually has both date and time, that's why the date search is not working?
I recently have ontained some responsibilies from a coworker who has left the company.
I have frmEdgeReport which uses ratio buttons to populate the
multiselect listbox .. this all works.. now i need to add date ranges and
Everything I do seems to screw up what I already have working..
I have added two textboxes - txtStartDate and txtEndDate.
Currently I am getting error when i put the SELECT statement in its own query that says "Invalid SQL Statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', OR 'UPDATE'."
and when I just run my form I am getting an error that says "Error 3142 - Characters found after end of SQL statement"
this is what i have so far :
Private Sub SetReport()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items
Dim strWhere As String 'String to use as WhereCondition
Dim strDescrip As String 'Description of WhereCondition
Dim lngLen As Long 'Length of string
[Code] .....
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
I am trying to extract records within a certain date range.
My structure is as follows:
Query 1 = pulls data direct from a table. There is a date field which is in the format YYYYMMDD.
Query 2 = pulls data from Query 1 and amends the date format to:
dd/mm/yyyy
Has anyone any suggestions on how I pull data from query 2 from within a certain date range. i.e 01/01/2005 to 01/05/2005
Thanks
I have a query which requires date parameters, which the user enters into a form. The form enters the parameters into 4 different queries then runs them to produce a report.
This all works fine EXCEPT for one query.
If I enter my desired date range into the query (in this case it is between 01/11/2004 and 30/04/2005) it returns no results. As the only values in the date fields of the table are 01/03/2005 and 01/04/2005 it should return all the records.
However if I enter the date range between 01/01/2005 and 30/04/2005 it works fine. It also works if I enter 01/01/2000 and 31/05/2005 - it just doesn't seem to like the year 2004!!!
The problem occurs whether I enter the parameters from the form or simply type them into the criteria of the query. Any ideas, it's driving me nuts!!
Hello all
I was wondering if anybody could help me out with a query problem I've been having.
I've been trying to use a query to display a list of available cars for a given start and end date entered by the users. I have found some guidance to make an attempt but it isn't working. The text in the Input boxes isn't what I'd like. Also the query is displaying all the cars in my database even when I deliberately trying to exclude some.
I'd really appreciate any help As this is my first database and Im really struggling with the use of criteria.
I've included a screen grab including my formulas
http://img.photobucket.com/albums/v242/b3rnie/access_screen.jpg
Apologies if I've missed this advice in my searching
I am trying to design a report that uses a range of dates as column headers. The row headers are vehicles and the intersection between the columns and rows will display details about that day's vehicle usage.
To do this I need a query that will produce a row of date headers based on parameters from a form. Also, the report needs to display date headers even for days on which no events occur.
Any ideas?
See also:
http://www.access-programmers.co.uk/forums/showthread.php?t=130335
hello
I've set up a query which contains among others the following fields
ProjectID
WorkstreamID
MonHoursDate
MonHours
MonHoursDate and Monhours come from another query where the date is a calculated value.
If I now run the query, it works and lists the hours done for that project.
If I enter the following expression in the criteria for MonHoursDate
Between [Start] And [End]
and then run the query and enter start and end dates, I get nothing.
Any ideas what I'm doing wrong? The date formats are set to Medium Date and follow the following fomat DD/MM/YYYY
Thanks
sunil
Hello all, I would like to ask for some help. I am trying to make a select Query that will give information based upon a date range the user enters. I know how to make it so the info shows up for a particular date, but for some reason cannot figure out how to make it so it works for a date range. Can someone please help. Thanks
View 1 Replies View RelatedI am working on a database of investments. I have a purchase date and a matured date. I would like to create a query where I enter a month and any investment that is active will show. For example if I have an investment that is purchased 1/1 and matures 2/28 and I query February it would show. If the query is for March it wouldn't show. I can't seem to find the answer for this so any help would be appreciated!
View 4 Replies View RelatedI am trying to create a query where the user can enter a date range and receive a list of records filtered by that date range. The column header is "Date" and the criteria field I have as: Between [Enter Start Date] and [Enter End Date].
This normally works when the user enters 1/1/14 and 1/31/14 as start and end dates for example. however, the table I am linked to with an ODBC connection lists the dates in the following format: 12/26/2013 6:15:11 PM and it will only return records if I enter the full date like 1/1/14 12:00:00 AM and 1/31/14 11:59:00 PM. This is cumbersome for the user and if you type just 1/1/14 and 1/31/14 no records are returned.
Is there any way around typing the full long date? I do not know VB, I only know how to use query design.
Below is the expression I have in a query. I have a Combo Box on a form that will show all my query's so the one need at the time can be selected. My question is: is there anyway when I select this query to run from the Combo Box on the form that I can input the date range on the fly? The date range will change periodically and I would like to somehow input the date range when running the query from the Combo Box.
FORMS: DCount("[Date_of_Change]","all_trucks_table","[FORM #]=True AND [Date_of_Change] Between #06/30/05# and #07/31/05#")
Thanks for all help!
My question involves the table below
AutoNumber(primary key)
SerialNumber
Station
Defect Type
Date
Basically now I need to be able to get the result i've gotten by a date range, but the crosstab query won't let me do it the way you can in a regular select query...help..
------------------Station 1 ----------Station 2------------Station 3---------------Station4
RxFailure ------------52-----------------52
Bit Error Rate 10 -----0------------------15
I am creating a database for a workplace for staff management.
i want a query where the user can input a month or a date range and be able to view all of the staff on holiday during this period.
I originally had a working query however it ignored staff that were on holiday during this period for example searched 11/2006
showed holidays in november but not staff who are on holiday from before and still on holiday during this time.
At this moment in time the fields i have included for beginning the query is BookingID, StaffID, EventName,StartDate,EndDate
any help would be appreciated
Hi.
I want to set up a simple query criteria where it searches based upon a column called Date.
So I want a criteria that says when you run the query ...
Between which date range? And which date?
Now I know I need to use Between and And within the Citeria, however I would be grateful for someone to show me the exact wording for the criteria.
Thanks and kind regards.
Phil Drury.
Hi all, Please help me correct this criteria for a filter in my query.
I want to show all records between todays date and the past 14 days.
I've tried,
Between Date() and "Date - 14"
And it dont work. Thanks for any reply.
Please help
I have a cross tab query which is based on a simple query which gives me a summary of sales (sales by sales rep and sales by job type) is there any way i can put a date range into this? everything I've tried doesn't work. It works in a simple query but i cant summarize the simple query. Thank you in advance.
Hi all, Can someone please help me with a date range query. Basically I have a query that shows delivery dates, from 01/01/2006 to 01/01/2009.
I just want to modify the query so it shows all deliveries within the past 21 days and all outstanding deliveries until 2009. Please note that in some cases, the delivery date may have been left blank in the table (as this it maybe unknown). If that is the case, the query criterion needs to pick that up as an outstanding delivery. Can someone help me with this? So far I’ve figured out
Between Date() And Date()-"21"
Thanks
I'm trying to produce a query that shows all records of patients that have a 'non-active' status (stored in the 'Patient Details' table) and haven't had any deliveries after 31/10/2011 (date stored in the 'Deliveries' table). I've tried a few different ways including using NOT IN (which access didn't like!) but I'm still no closer to getting the correct records.
View 2 Replies View RelatedI am trying to create a simple database to keep track of employee Car Insurances and MOT information.I am trying to create a query that will show me the following:
When the field "motexpiry" is Empty OR has a date within 30 days from todays date (including if today's date is in the field) OR the date is in the past.It also needs to show records with the same criteria for the field "insuranceexpiry".
And needs to show records where the field "cowensform" is blank.These are all OR queries, so that as long as ONE of all of those criteria is met, the record shows up.Once that query works, I need a very similar query but only showing records where one or more of those criteria is met, but only if the record also has "Oldham" in the "area" field.
I can then copy that query and edit the "Oldham" bit to have a query for each of our area offices.I tried putting "Oldham" in the criteria line of the area field in the query design, but it seemed to have no affect.
I have built a search form based on a bound to a query where I have Like criterias to search data by Departments, Groups, Names etc..For e.g to search by Surname - I have --
Like "*" & [forms]![frm_Search]![Surname] & "*"
This works great and returns Surname data that looks like what is entered in the text box on forms.Now I want to do similar thing in order to search data between 2 dates plus if I leave Date form text box blank it should return all data. Its 2010 therefore using date picker in 2 text boxes (Start Date and End Date)
I have a graph which queries data from a table, I need the graph to show the dates in the table with the correct results specific to that date.
However on the graph its displaying dates not in the table so its plotting the results out wrong, I need it to only show the dates in the the table on the bottom axis.how to do this.