Hi everyone,
I have a form where one of the fields is set as a Date() for default. but I need another field where i been trying to set de default as date() but iget nothing the field shows nothing. What I am doing wrong?
what I am trying to do is to campute the date where the record was change and the date when it gets change and by whom.
Any help would be sure appreciated.
Thanks
jac :o
I have a database which stores information relating to club members, which I'm in the middle of giving a bit of a facelift and one thing I want to automate is the calculation of the expiry date.
My memberships expire annually at the end of December and the expiry date is set as a default value within the table properties. This has to be manually changed every September (every new member from then pays for 15 months) to the following December.
Is there a formula I can insert in the defaul value field that will return December the current year if todays date is between January and August, and December next year if todays date is between September and December?
Hey All, I have a main form PID and and Building form I need to have the data from the building table display on the building form, upon adding a new record. Since my PID form and building form are linked to show the same records. PID Form contains- PIN NUM, ADDRESS, PARID. The Building form contains, PIN NUM, DATE, PHONE, OWNER, SIZE, LOCATION... I open my main form filter my results for my reocrds to show up... PIN-20053227, ADDRESS-MAINSTREET, PARID-NEWFIE22. This data is obtained through the PARID table. Now I click on the command button to see my building forms, there are 6 records, here I have the ability to add, modify, delete, save... What i want to do is add a new record, but have some generic fields appear from my table. since my name, PIN, address hasnt changed. So I would like to click add, and have appear from the building table, OWNER, PHONE etc... How might I be able to do this?? Thanks- NOTE: Hey all I double posted this incase you didnt notice this in the FORMS, Form.
View 4 Replies View RelatedHey All, I have a main form PID and and Building form I need to have the data from the building table display on the building form, upon adding a new record. Since my PID form and building form are linked to show the same records. PID Form contains- PIN NUM, ADDRESS, PARID. The Building form contains, PIN NUM, DATE, PHONE, OWNER, SIZE, LOCATION... I open my main form filter my results for my reocrds to show up... PIN-20053227, ADDRESS-MAINSTREET, PARID-NEWFIE22. This data is obtained through the PARID table. Now I click on the command button to see my building forms, there are 6 records, here I have the ability to add, modify, delete, save... What i want to do is add a new record, but have some generic fields appear from my table. since my name, PIN, address hasnt changed. So I would like to click add, and have appear from the building table, OWNER, PHONE etc... How might I be able to do this?? Thanks
View 3 Replies View RelatedHi, I am a newbie in MS Access. I am trying to write a simple database to record engineering drawings received. I would like to retain an entry into a field from a previous entry, but if it is slightly different allow the value to be overwritten.
For example:
If I receive a drawing from a particular person, (say) Osborne, then that is entered into the senders field. The next drawing I receive also from Osborne, wil already have Osborne in the entry field from the previous entry so I will not have to retype it. If a drawing is then received from someone else then Osborne is overtyped with the name of the new sender.
Anyone help a newbie with this please? Thanks
I am using Access 2013 and in table design view. Whenever I add a new 'Number' or 'Currency' field the 'Default Value' property is (by default) always 0.This is fine except when i want to refer to a foreign key or amount which could be unknown. In either of those cases the resulting field will either be invalid (because no foreign key has ID = 0) or inaccurate (because 0 is not the same as Unknown).
I would prefer if the 'Default Value' property for new fields was always nothing, then I can add my own if and when required. I want to change the default setting on a property for new fields, not the value of the field itself.
I'm guessing this isn't actually possible, but at least this post has served to vent my frustrations! What bugs me even more is that i'm sure it wasn't like this in Access '10, is this another "upgrade".
Hi, I want to make a default value for the date when a record is inserted. I don't want to use Now() or Date(), I want to use one that only displays the month eg: "June" and that is all. Any ideas? Many thanks.
View 14 Replies View RelatedHi people,
May I know how to add 2 fields.
i.e
My table has 3 columns
Field1 Field2 Field3
The value of field3 = field2 + field1 (the formate of field1, field2 n field3 are currency)
how do I indicate that the value of field3 is depended on the value of field2 n field1
is it under the default value of field3(in the TABLE design view)that i indicate field2 + field1?
thank u
I tried searching everywhere and cant seem to find an answer to this one...
Is it possible to have a default value in a table which would be current month and year + text? Eg. mm/yy "text"
=now() & "text"
is fine but I need to format the date to mm/yy and cant seem to get it right.
eg. 08/06 Lease Payments
Also is there a way to do it for previous month, so if processing today it would give 07/06 Lease Payments?
Thanks in advance!
I have a query which prompts for two dates in the format of -
BETWEEN [Enter the start date] AND [Enter the end date]
How do I provide a default date for one or both of the dates?
Robert
Hi Dudes
I have a text box on a form which is formatted as medium date and I want it to default to the Monday of the following week. So for today it should have 07-Mar-05 in the text box.
Can anyone please advise a method for this.
Thanks
VC
Hi
I am using Microsoft ActiveX Control "DTPIcker", in my form.
However when I open my form, the default value is the value set when it was made,
Is there anyway to make it have the current date,
I read somewhere to use:
me.dtpicker.value = date()
Where should I use it
I tried it as a code for DTPIcker, but it didn’t work
And starting it on Form Load, resulted in an error, not knowing DTPIcker,
Any Help is appreciated.
I have search for an answer on this question.
What I am trying to do is set the default value =Date() until 11:00am and then I want the date to covert to the next day.
Can anyone please help me with this or is this even possible?
I have a little application that includes information about insurance deductables.
Deductables revert to their maximum on a date set by the insurance company, but that is USUALLY January 1.
So, for the control on the form where a new patient is set up, I have a date field where that "revert" date is to be entered.
Since it's usually January 1, I want a default to appear of January 1, of whatever the current year is. I've been looking through the Access help screens as well as this and other forums and have not found anything to suggest how to go about this.
Not being trained as a programmer, I'm coming here asking for some help.
Can anyone give me the appropriate code to generate the default date I want?
The Database I am currently running has multiple date fields. I want a particular date field to default to another date unless a specific date is entered.EG if Date2 field is empty use date1.
I have a formula which is based on date2...Neither of these dates are current dates and fall anytime 13 weeks+ in the the past.
I have a blank form that is usually entered from scratch, so all the fields are empty.
We do fill out the form with standard data occasionally, so I'd like to be able to assign a button or use a combo box to automatically fill those fields with predetermined data.
Two questions:
1) Can I use a 'on click' for a button to populate the data using this:
Code:
Me.Control1.DefaultValue = Chr(34) & Me.Control1 & Chr(34)
2) If I have a default value fill a combo box, will it save the bound column correctly since I didn't select it from the drop down itself?
I am hoping someone can help me, a real novice at Access 2000 - I am trying to construct a couple fields in a table, 1 of which will show a default value equal to a 2-digit year (yy) based on the current date. The second will display a default value equal to a two digit month (mm) based on the current date. Text fields would be ideal, but date field could work if it's the only way. Thank you for helping out a newbie.
View 4 Replies View Relatedi have an unbound form where users can enter as much or as little as they'd like to search the database. i'd like to have default values for two unbound textboxes for initial date and ending date. i was wanting to put in 1/1/1999 for initial and 1/1/2050 (or another high number) for ending date. however, when i put those values in the Default Value property for each textbox, it changes to 12/30/1899..for both the initial and ending dates...how do i get my dates to show up?
View 2 Replies View RelatedI have a form open with a Text box displaying todays date, I have used the default Date().
If the user leaves the form open over night the date is still set to yesterday, any ideas how I can refresh the default? I want to refresh just that object nothing else.
it's name is 'Text29'
many thanks Jon
I am developing a customers and orders database for a coffee sales company. I have, of course, a tblOrders that contains the fields 'OrderDate' and 'CallBackDate'. The 'CallBackDate', in most cases, should be 14 days from the 'OrderDate' and self-populate as a default value based on the 'OrderDate'. No problem with the concept there.
I originally wrote the following expression as the control source of the 'CallBackDate':[OrderDate]+14
Yes, works beautifully, populates field just as it should. However, if, for some reason, they want the 'CallBackDate' to be more than 14 days, you can't override and type in your own date.
I have also tried making the control source the 'CallBackDate' field and the default value [OrderDate]+14, but then it doesn't default, only leaves the field open for manual entry. I need to be able to somehow do this within Access. Text fields will allow you to override a default value.
How can I setup that when opening a new record in a form - that one of the fields by default opens up with the current date...
View 1 Replies View RelatedIs there a way to use the date entered in one field in a table as the default date on another field in the same table?
View 1 Replies View RelatedI would like to have the date of each new record as the system date IF the field does not already contain a valueThe code below works but changes the fields date even if the field already contains a value
Date ()
===
Tried the following as the Default value, but they do not work
IIF(nz([Date())
nz([Date()])
===
I have a button in a form that brings the user to a table to add a new record. I want the feild of "dates" to be automaticlly populated with a value that is 7 days after the previous date in the field. the code i have currently is
Code:
Private Sub Command14_Click()
DoCmd.OpenTable "Cincinnati Time Sheet", acViewNormal
DoCmd.GoToRecord , , acNewRec
End Sub
I would like for my report for default to the earliest and latest date ,should the user not select a start date and end date.
I have read about using MIN and MAX , but i am not sure how this would work.
I'm trying to get my "IncidentDate" field to autopopulate two other date fields to a few days from the "IncidentDate". The other two date fields are "ContainDueDate" and "RootDueDate". I'm trying to accomplish this on my "Test CAP Form"
I tried using the following in the BeforeUpdate of "ContainDueDate" and received a complier error: expected =
Code : DateAdd(d,2,[IncidentDate])
so I removed the parenthesis and nothing happened
Code : DateAdd d,2,[IncidentDate]
I even tried redoing it in the AfterUpdate of "IncidentDate" and nothing happened either
Code : DateAdd d,2,[ContainDueDate]
I'm not sure if I'm even using the right function to get what I want.