I have a spreadsheet that has been downloaded from a website. On the website people have chosen from a group of 28 checkboxes their answer. I have imported this spreadsheet into access. I now need to be able to run a report that shows only the one they chose instead of listing all 28..
View RepliesI've got a field in a table that is a multiple drop-down list. In the form, I don't want it to be a drop down list, but I want the options in the drop down list to be checkboxes instead (not within a drop down).
View 4 Replies View RelatedI have an issue with a couple of my combo boxes. When in form mode the drop down menu displays a list of options (taken from my source table), this is fine, but the problem is that it allows the user to select more than one of the options in the form of checkboxes. This is not what I intended.
I've attached to pictures to demonstrate the problem. The first is ComboBoxQuery (the one with the problem) and the second is ComboBoxQueryWorkign (the one without a problem).
I'm not sure why this is happening and I've tried comparing all the properties of both these combo boxes and changing some of them to see if I can eliminate the problem without any joy.
I use a very standard SELECT statement to pull the data for the combo box:
SELECT CountryID, CountryName FROM tblCountryInfo ORDER By CountryName
I have a drop down list with the following : Week And Weekend :. I want to change the Average field depending what is selected. But having a problem.
I'm using the below code, but does not work
Code:
=IIf([Days select]="Weekend", [Reports]![Weekend Settings]![Average),([Reports]![Week Settings]![Average])
Access 2003. Job booking data base with up to group of 10 different users. At the end of the month, I need to count the total amount each user has checked a particular check box and then automatically calculate the total of the whole group.I have only a basic working knowledge of Access 2003....
View 1 Replies View RelatedI have a Form with a combobox and 3 checkboxes now i want to change the Rowsource of the Combobox by clicking on the checkboxes. When i click the Checkbox the Rowsource gets Changed as i want it but i can not use the new Values cause its giving me the error "The value you entered is not valid for this field"
The Funny thing is its always bound to the type of data i choose first. When i first select the Week i can select only Weeks (17,18,19 etc)
When i choose Day first it only accepts Dates (01.01.2014 etc)There is no Control Source set . And the Bound Column for all Sources is 1
Here the Code
DD_Zeitraum is the Combobox
CB_Day CB_Week CB_Month are the Checkboxes
Code:
Private Sub CB_Day_Click()
If Me.CB_Day.Value = -1 Then
Me.CB_Month = 0
Me.CB_Week = 0
Me.DD_Zeitraum = ""
Me.DD_Zeitraum.RowSource = ""
Me.DD_Zeitraum.RowSource = Dist_Datum
Else
Me.CB_Day.Value = -1
End If
End Sub
[code]...
I have a combo box in my report design and I would like it to display "true" values as a list with check boxes.
View 5 Replies View RelatedI would like to change the reports drop down.
1) Change the names of the reports
2) Add additional reports.
I am creating a table in Access 2003, and I need to add a drop down list to one of my columns. See the attached picture - I need to add a drop down list to the "Division" column that will allow the user to select from one of 5 choices. How do I do this?
I'm an Access beginner, BTW. :)
Hello all!
I have a drop down menu that pulls values from a table. When clicked that value pops up in a total field. Currently I only allow 1 value to be selected. When the user (me at this point) chooses another value, the value is added to the total instead of updating with the new value. So the every time it is clicked it just goes up and up. So I decided to add a loop. However it seems my look is not having an affect but obviously it is being read since the first part is being processed. I thought I would post it to gather thoughts... Thank you!
Quote: Private Sub lstbagels_Click() Dim newcharge1 As Currency Dim newcharge2 As Currency Dim oldcharge As Currency If oldcharge = 0 Then newcharge1 = Me.lstbagels.Column(2, Me.lstbagels.ListIndex) Me.txttotal.Value = Me.txttotal.Value + newcharge1 oldcharge = newcharge1 Else newcharge2 = Me.lstbagels.Column(2, Me.lstbagels.ListIndex) Me.txttotal.Value = Me.txttotal.Value - oldcharge + newcharge2 oldcharge = newcharge2 End If End Sub
I have one more question:
I have a ComboBox in a form that is looking at a field in a Table. When I select one of the items from the drop down it finds the record and shows all the fields in the form...
Everything works great, but
THere are quite a few records in the database, maybe 1000. If I use the scroll on the drop down and drag it to its bottom and let go, its not actually at the bottom. I have to do this repeatably in order to get to the full set of records.
Is there and easier way to do this?
I have run into this on other occasions with smaller number of records as well.
Would this run faster if I grabed this list from a query instead? And then set the form record to the value of the drop down (runngin the query)
Thanks in advance...
Hi There,
Is it possible to change ownership of a database to a group rather than an individual? The reason I ask is that i'm due to leave my employment this week and need to generally get things ship shape before I go. I currently own all the DBs that we use and I need to change that so people can take care of them (or wreck them depending on who it is!). I have set up user groups, one of which is "developer" and I would like this group to own the DBs so that they can be passed on without too much fuss.
If not then I need to change the owner to an individual and am really not relishing the prospect of importing all the objects into a new database just to do that, the thing is huge, has loads of fairly intricate permissions which have been carefully honed over the last couple of years. I read somewhere that you can change the DB owner if you exclusively open it but I have tried that and the "Change Owner" button is still greyed out.
Does anyone have any ideas?
Thanks, Tom
Hello,
Ok, let me preface this with I'm a newbie at Access, and I'm currently using Access 2003. I'm just hoping someone can point me in the right direction. Right now I have multiple tables with set data in them that doesn't change linked to another table where I have a drop down menu (combo box I think it's called in Access) to easily select the given data from. I want to have a drop down box (combo box) to have a set of given variables I have in a table to put in the search criteria. That way a user doesn't have to type the exact criteria into a query. That way I can easily put in the variables I want to search from in the query with less chance of an error. I'm hoping this is possible.
Ideally if I could get help in how to make a form that would allow me to have the set of columns from the corresponding tables with combo boxes to select from and then be able to have a "subimt" button and have it organize the selected results into that form as well.
Thank you for taking time to read this.
Hi all,
I'd like to modify a query of mine a little ...
Currenlty, when I click on my query and have it begin ... I have it set up where I then enter three seperate pieces of distinct data so that the exact information I'm in need of, which is stored in 2 seperate tables, can then be pulled together and displayed into one final combined table ...
I'd like to modify this beginning point where ... once I click on the query to begin, I can then just choose from a Drop Down list which has all the various rows of information displayed via these 3 unique indentifiers ... I then just scroll through and pick what I need and it then populates the final combined table as before ...
How do I add the drop down effect at the start of the query?
thanks,
TIM
Hi Everyone
I'm not too sure if this request is a query issue or not so please excuse if this is posted in the wrong section.
I am creating a database that picks up the start and finish time of each employee and displays the total hours worked by day and week.
I would like to be able to search by employee name from a drop down list but I am a unsure how to do this.
Can anyone assist?
Many thanks :)
Hi folks,
I want to populate a drop down combo box with a list of 10 years (current year +/- five years). I can enter them as a Value list but I don't want to have to update the list every year. Neither do I want to allocate a table to maintain a list.
Any ideas as to how I can auto populate the combo with a 10 yr span (5 previous and 5 next) and default to current year?
Thanks,
Dave
Hey guys, I have a question that I am hoping you can point me in the right direction on. Before I ask it, I am new to access. I have been looking at templates and reading and things on how to build a database. I have my tables setup, relationships I think are right and my form created. One of the things I am having trouble with is creating a drop down list to be able to pick a customer name for. I setup the combo box and have a customerID as the control source in the properties. I have the Row Source Type as table/query and the Row Source query setup so it takes the info from the customer table.
query:
field: customer.* name
table: customer customer
I think I am doing this the same way the templates have the properties but for some reason it won't allow me to pick from the list. It keeps saying "control can't be edited. It's bound to unknown field 'CustomerID'".
I attached my database. I hope it is clear enough that you might see what I have done wrong. Thanks in advance.
I'm pretty much a noob to visual basic, I've only taken C++ so I dont really know VB language. ok here is my question... I have a form and I added a drop down list through a table. What I want it to do is output into another text box within the same form when an item in the drop down list is selected. I think I have to make an event procedure for the "On Click" or "On Got Focus" selection. please help me out !!
View 5 Replies View RelatedIf i have a drop down list containing employee type names e.g. Plumber plasterer bricklayer from the employee type table. How would i select the bricklayer and bring back records associated with the selected employee type . I have done a query to go and get the records for the employee type and it works for one employee type.
But I cannot get the button to go and get the records when i select different employee types from the drop down list. I could add loads of buttons with the same query and change the employee type but looks a bit crowded and untidy. Am i missing something simple or is it just complicated.
I have a drop down list in a table with name and commission rate. When I choose the name it displays but I want both the name and the commission rate to display in my table. I want to use a data entry form to enter values in the table and I want the same in the form too (when I choose a name I want the corresponding commission rate to show up).
View 3 Replies View RelatedI have a people table for all the people .I set a query to select only those that are Family Navigator Mentors ID,FName,LName..I use this query for a lookup on the family navigator table to select a mentor on the form I want the ID FName and LName to show up not just the ID.????
View 9 Replies View RelatedI'm a new user of Access and I'm required to input a survey into access. The data collected is being analyzed afterwards and therefore there cannot be any alpha content in the original table so I assigned multiple choice options numbers to correspond to the answers. In form view however I need the drop down boxes to spell out the answers, not just the numbers so the interviewer can read them out, I've seen this done on other similar surveys..I also tried going into form view and editing the drop down choices but that changes the table values.
View 1 Replies View RelatedI have to change a group membership of one user in an multi user access database. As I see its no possibility to change it in the backend (in X.ldb file) nor in frontend.
View 2 Replies View RelatedI'll admit from the start that I'm a newbie at Access 2003 and I've tried looking in the help file and internet searches. But I've become stumped on how to create what I'm looking for.
I would like to create a form that performs a query that has drop down menus with info from each specific column in a table. That way I don't have to necessarily need to know off the top of my head what data is entered in that column, but can click the drop down menu and get all of the data listed in that particular column. Once have a particular set of info selected, then have a button like "submit" and then the query results appear in a form and click through each page or results.
Is this possible?
Hi-
Can anyone help me? I am trying to add new records/data entry on a Form from a list of drop-down options.
I have a database of vendors with names addresses etc. I will be selecting a specific vendor from the pull-down menu and then add data entry comments. Please help!
Hi,
I have a combo box in which it's value changes according to user input. It is working but it is annoying to have to click the combo box for it's list to refresh. How to make it seemless?
Thank you