I know you could select a date by using the show date picker as for dates in property and a calendar pops up. But can you select a time too, separately or together with the date? Together as in one field where you choose a date with the calendar pop up and then also choose a time for that date.The result resides in one field. I doubt this is possible.
If not possible, then have two fields, one is to choose a date with the calendar picker, another with a time picker, both date and time now will be in separate fields, can this be done?
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only. ([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null) How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName FROM Staff INNER JOIN myTable ON Staff.ID = myTable.StaffID WHERE myTable.myDate >= #3/2/2014# AND myTable.myDate <= #3/3/2014# AND myTable.myTime >= #8:00PM# AND myTable.myTime <= #11:00PM# ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
I have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
I've done some searching, and haven't found any threads that match what I am attempting...
I have a database that tracks expenses that are incurred under different ongoing projects. I currently have a report based on a query that asks the user for the project number, and shows all the expense invoices that have not been paid for that project. This report is basically an internal invoice that gets assigned to a department, and so it is assigned an internal "invoice" number. Currently, the user types in this internal number before the report is generated and it is displayed on the report for printing purposes.
Here's the tricky part (for me anyways): I would like to be able to filter the invoice records by project number, and then append the user-entered internal invoice number to the applicable records. There is already a field in the table for this data, and it is currently being entered on individual records after the report is printed. My goal is to be able to do this all in one step.
Any help will be greatly appreciated... Thanks guys!
Is it possible to select 1 MAX date from multiple date fields for a record?
For example, on an employee record there are 10 date fields, each for a performance review date. Some employees may have date fields 1-3 with values, some with just 1, others 1-5, etc.....depending on how many performance reviews they've had.
Is there a way to pull the MAX review date for an employee, knowing that the MAX date could reside in Field 1 for a certain employee, and could be from Field 7 for another?
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code: Private Sub Update_DOD() Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset Dim DOD As String rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code: CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
I want to make a query that results in displaying records that have the same IP-address where the difference in the date/time stamp is within 1 minute. When the date/time stamp is > 1 minute the record can be deleted from the table.
I want to give the user the ability to run a report but display records based on different user defined time frames. So when I run the report it allows (on the Enter Parameter Value prompt) user to enter 30, 45 60 etc (to represent days). The report then looks at all records with a start date in the next x days based on what user enters
For a separate report, I want to be able to run the same report but give user (based on drop down) ability to view all reports or only those from today's date only.
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
In VBA, how to compare date variable with date/time field from table, as when defined the data type in table, date/time option is the only choice for date data type even though I don't want the time portion.
I am trying to compare a value in my databse produced by the date() function, short date format, to one that is exactly 24 hours after the value recorded by the date() function. If the value in the database is 24 hours prior to the current date(), I need to flag a text box a diffrent color to alert the user. I am unsure on the If statement that I will need to produce this result.
Any help would be greatly appreciated!!!! Thanks Mikeco555
I have a report that have a datebox(Short date) and a timebox(Short time) and also a box that contains numbers like 36:59 and so on. That number is hours and minutes, I would like to take the date, time and add my 36:59 and get a new date from that and put that in another box. The date and time is used as planned date and planned time for some work to happen. 36:59+planned time+planned date=should be planned finishing date and time. Does anyone know what I have to do, to make this happen ???
How can I create a field in a query, extracting the date portion of a date/time field? The format is mm/dd/yyyy hh:mm:ss. I need just the mm/dd/yyyy so I can prompt the user for a date range, without them having to key in the date mm/dd/yyyy 00:00:00 to mm/dd/yyyy 23:59:59. Please Help
I'm trying to make a report query work but with no succes so far. Can anyone please help me? I've got a multiselect listbox and a txtbox (txtCursisten) where the results from the multiselect listbox appear. I want to get the results out of a table (tblAbsentie) where I can set a start and end date AND use the people selected in the txtBox. So far I've got a NOT working query, a report based on the query and a button on my form.
The VB code behind the "show report" button is this:
Private Sub cmdAbsentiePerCursistPerPeriode_Click()
On Error GoTo Err_cmdAbsentiePerCursistPerPeriode_Click
Dim db As Database Dim Q As QueryDef Dim sql As String
If IsNull("Me.txtCursisten") Or Me.txtCursisten = "" Then Exit Sub Else
Set db = currentdb() Set Q = db.QueryDefs("qryAbsentiePerCursistPerPeriode") Q.sql = "SELECT tblCursist.Naam, tblAbsentie.Datum, tblAbsentie.Lesuur, tblAbsentie.AantalLesuren, tblAbsentie.Deelkwalificatie, tblAbsentie.Docent, tblAbsentie.Gemotiveerd, tblAbsentie.Reden, tblAbsentie.Status, qryCountLesuren.SumOfAantalLesuren" & _ "FROM (tblCursist INNER JOIN qryCountLesuren ON tblCursist.OVnr=qryCountLesuren.OVnr) INNER JOIN tblAbsentie ON tblCursist.OVnr=tblAbsentie.OVnr" & _ "WHERE (((tblAbsentie.Datum) Between [Voer begindatum in] And [Voer einddatum in]) AND ((tblAbsentie.OVnr) In ("Me!txtCursisten"))); " Q.Close
DoCmd.OpenReport "rptAbsentiePerCursistPerPeriode", acPreview End If
On Error GoTo 0 Exit Sub
Exit_cmdAbsentiePerCursistPerPeriode_Click: Exit Sub
Err_cmdAbsentiePerCursistPerPeriode_Click: MsgBox "Selecteer klas en cursist(en)." Resume Exit_cmdAbsentiePerCursistPerPeriode_Click
End Sub
I get a syntax error when pressing the button. Please help... SeBasTiaan
I have a table that shows me 3 fields: PROCESS EFFECTIVE_ OPERATION_
My issue is each process and operation may be there multiple times due to multiple Effective dates. I only need to see each Process and Operation one time based on the latest Effective date. Below is what I have NOW:
This is what I need: PROCESS EFFECTIVE_ OPERATION_ 1/010/1-8TCOWLFEEDER 2005-11-09 10 1/010/1-8TCOWLFEEDER 2005-11-09 20 1/010/1-8TCOWLFEEDER 2005-11-09 30 1/010/1-8TCOWLFEEDER 2005-11-09 40
Out of the records above I would only want to see the records with the 2005-11-09 date. The dates can vary based on processes so I really need something that selects the the latest date for each Process and Operation. I would like to do this in a query or multiple queries.
Im trying to select all the entrys in a table where the date of the last payment is before a variable 'reminderdate' this works fine if both dates are in the same month ie, DateLastPayment = 26/11/05 and reminder date = 30/11/05, but if the DatelastPayment is 26/11/05 and the reminder date is 01/12/05 then nothing is found.
