I have a Report linked with a SubReport. I would like to cancel viewing this Report if my SubReport Has No Data.
i tried this code but the report just shows up. Any Ideas?
Private Sub Report_Open(Cancel As Integer)
On Error GoTo Err_Trapper
If Reports![qryRepCurOrgProjsSR].Report.HasData = 0 Then
Cancel = True
End If
Err_Trapper:
MsgBox Err.Description
Exit Sub
End Sub
Ok i got an error message. Yoy entered an expression that has an invalid Reference to the hasData property.
Ive tried using a text bpx on my main report and putting a control source as
=IIf(qryRepCurOrgProjsSR.Report.HasData,0,"Nothing")
Then in my Report Open Event i put the code below. But it fails me still.
If trim(Me.MyText) = "Nothing" Then
MsgBox "The Report Is Cancelling....."
Cancel = True
Exit Sub
End If
I have a report which programmatically sets the value of some labels based on its own internal logic for each line of the detail section of a report. This all works fine and dandy, using the Detail_format event, and accessing detail.controls.item(x).caption.
HOWEVER, when I then embed the report as a subreport (which I need to do), I goes wrong. Here, I get the values of the last row of the detail repeated in every previous one. I'm suspecting because the parent report has its own 'detail' (I've tried giving the subreport its own distinct detail name).
I have a form and a subform in it. I added New cancel button in the form so that the the user can cancel the record creation and no record will be inserted in the parent table.
But when details are entered in the subform (a datasheet) row records will be created in the subform table. what is the correct method or how to cancel these records if the user choose to click cancel button on the parent form.
I followed directions on a Microsoft site which created a desktop shortcut to auto-start a Report in Access 2003.Is there a way to re-show the Report query box until the user hits Cancel?The end-user is non techy and wouldn't remember how to run it manually once the first Report was ended.
I have a report named rpt100 with two subreports srpt100a and srpt100b. The subreports are based on query qry100a and qry100b. Both queries are based on tbl100. I removed a field named 'Comment' from tbl100, as it wasn't useful; Also removed the fieldname from both qry100a and qry100b. When opening rpt100 a parameter dialog opens asking for data on the deleted fieldname 'Comment'. The field 'Comment' was never used in the report or subreports.
Inspection of the subreport fieldlist shows field 'Comment' still present.
How, other than remaking the rpt100 and both srpt100a and srpt100b, do I remove the field 'Comment'?
Below is the working version of the code works for single report filtering. say a report called "rptduedate_census2" and i can filter out using form instead of hard coding query of that report (say lastname=form!frmsample!txtlastname). I dont want to hard code query and there are reasons for that.
I am using a Main report called "rptDueDates_Dept' and there are about 10 different subreports (see print screen). The main report is not bound to any query. It has many subereport. Each subreport is bound to some query and i need to be able to filter them before data appear on the main report. Am i making any sense, LOL.
How can I implement my working code below to do this. PLEASE PLEASE PLEASE HELP. I AM NEW TO ALL THIS. I have attached a print screen of the main report, just to show how i put subreports in their.
===== MY WORKING CODE ====== Private Sub cmdPrv_Click() Dim strFilter As String
strFilter = "[Mail_Census_Date] BETWEEN #" & txtStartDate & " # AND # " & txtEndDate & " # "
' Apply the filter and switch it on
If SysCmd(acSysCmdGetObjectState, acReport, "Report") <> acObjStateOpen Then DoCmd.OpenReport "rptduedate_census2", acViewPreview With Reports![rptduedate_census2] .Filter = strFilter .FilterOn = True End With DoCmd.Restore Exit Sub End If
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
I am trying to get my totals from my subreports, and dividing the number by 2 or 4, and put the new number on the main report.
for Operator/Trainer Productivity, I used: =([rptEmployEvaluationOperator subreport].[Report]![OPTotal]+[rptEmployEvaluationOperatorTrainer subreport].[Report]![OPTotal])/2
for Auditor/Trainer Productivity, I used: =([rptEmployEvaluationAuditor1 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor2 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor3 subreport].[Report]![OPTotal]+[EmployEvaluationAuditorTrainer subreport].[Report]![OPTotal])/4
These both work if there are values in all totals subreports. When one of them might not have a total, I get an error message.
I have a report that is fixed at one page for one record. However, there is a subreport with many transactions ("CanGrow"=No). If this goes to a new page I have to close the report and start a new one. This all works fine, except for the last transaction - if the second-to-last transaction record is at the bottom of a page then the last one does not print.
Access seems to format the data, then it realizes that it won't fit on the page so doesn't print it. I am using record id number to know which transaction record to start the next report on, so when it gets to the end my logic thinks it has reached the end as the id number is the last one in the set.
How can I know if the last record has printed or not?
I have a main form (ZooMobile Booking Form-New Client) with a subform (ZooMobile Event Booking-New Client) within it. In the main form I have a button to open up a report displaying the main form's current record.
The report that is opened has a subreport that needs to display the current record from the subform.
So far I've managed to get the report to open to the main form's record using the following On_click command:
I can't manage to get the subreport to open to the current record in the subform, however. I've tried to integrate it into the above event and to use On_load events in the report and subreport but everything either comes up as a bug or has no effect on the subreport's record.
I want to refer field "plyty_sa" which is in "RaportZleceniaRobocze" Report, in "RaportRobocze_Offset" SubReport. The problem is that, SubReport is in Report Footer. I tried many possibilities but I can't find solution.
I am trying to open a report (rptGMX-IRG) that includes a sub-report (srptRG) based on criteria that is set with two unbound fields on a form (frmGMXbook). This form has two dropdown boxes (cboGMX_No & cboMachSize) and a command button. The first dropdown box includes data located in the main form and the second dropdown includes data that is part of the sub-report.
I can get the report to open properly when I enter data into both fields on frmGMXbook.
However, the problem I am having is the inability to have one or both fields be "Like '*'" and show all associated records.
Here is the code I have on the command button.
Private Sub GMX_Preview_Click() Dim strCriteria As String If IsNull(Me.cboGMX_No) Then strCriteria = "[cboGMX_No] Like '*'" Else strCriteria = "[GMX_No] ='" & Me.cboGMX_No.Value & "'"
I have a report that has two sub reports one to report deposits and the other to report payments.
The report prints fine if there are records in both sub reports, however when the payments sub report is blank then the report hangs and won't print to pdf at all.
I am trying to join a number of reports into one report. I have a generic report which displays a different dataset given the user's choice on a form. I created a collection where I can store multiple instances of this report (called mcolReportInstances) - this works just fine.
I was looking to combine all the reports in the collection into one report. To that end, I have created a report with a number of subreport controls but with no sourceobject. In the On_Open event of this blank report, I am trying to set the source object of the subreport to one of reports in my collection:
How to display only the first few records in a subreport but keep the grand total of the report itself. When I limit results in query; it gives me the records but only totals for that set. I thought about putting code in the on format in detail section like:
Code: If me.control.value >10 then me.control.visible =false
Using Access 97, I have a single-form allow-additions form where a couple of bound fields are auto-populated 'on current' and a couple of other bound fields are left to be populated by the user (me!).
At the end of an input session, I can press ESC and then close the form OK. But if I forget to press ESC and try to close the form, I have an invalid incomplete record on screen.
How do I indicate that the new record isn't wanted? I have tried stuff like If Me!txtRequiredBoundField = Null then SendKeys "(ESC)" End If to no avail.
Hi, I want my user to be able to "cancel" his entry. At first I tried just deleting the record they were working on. But that added numbers in the auto number "ID" field, and I also needed the feature for editing, so deleting wasn't an option. As of now I have something that works, but is kind of messy. I made a mirror "temp table" that I write the record to. If they "save" i append/update the record to the regular table, then delete it from the temp, if they "cancel" I just Delete it from the temp. Was wondering if there was a cleaner way to do this ?
Hello All, I am finding this one difficult so felt I should post my issue. I have status field on my form. It is a bound field. A combobox - inactive, active. I wanted the field to do the following when changed If change then msgbox = Please enter reason in activity notes a vbYesCancel If they select it calls the activity notes form - this portion works. If they select cancel I tried making the field do form.field.undo (Me.statusid.undo) - something similar Cancel = True to reset the field to the original state. This fails and says my object is not valid I would be happy to take any suggestions . As always thanks in advance.
After looking through the forums, i couldn' really see the answer i was looking for. I have a form, that users can enter in details (with an auto-number created which is assigned to each record). Once they have entered the detials, theres a 'save' button which will save the record - which is fine. I also have a 'return' button which should return to the previous form and doesnt save the record. But as it stands, the record is saved when i click this return button. How do i make it so that the record isnt saved untill the save button is clicked? so if i return from the screen (pressing the return button), the record isnt saved (i.e. a cancel button).
I am having a problem with my cancl button on my form. this form has a subform. any changes cancel correctly on my main form. the problem is when there is a change on my subform and then is cancelled.. any ideas anyone? thanks!
