I have a query where on an IIF result a field is displayed or an "OK"
I have an imported field of 6 chrs where I only want the left 5 so I use
Loc:=Left([Location],5) ,
I then compare the result in, MoveTo: to another fixed field [PreferLoc]
MoveTo: IIf([Loc]=[PreferLoc],"OK",[PreferLoc])
I wish to citeria out all the "OK" values so I have <>"OK" in the critria section but when I try to run the query I am presented with a selection box asking for Loc
This Query feeds a report so I set the filter to yes in the report properties and use [MoveTo]<>"OK" as the filter and this works great until I close and reopen the app where the filter has gone ?
Can anyone advise where I am going wrong with my query and or my report ?
I am working on an ADP ( first time working with this ). I have a form that is based on a parametized query.
The record source for the form is the parametized query which works fine the first time it is brought up. When the user wants to change the client number, a button "change client" is clicked and the event that gets triggered is openform=("edit client")...... Well, instead of being prompted, I get the error "The ApplyFilter action contiains a filter name that cannot be applied".... When I do a right -click on that same button, and "remove filter "I can get my prompt, but I dont want to keep doing that. I am not sure how to remove the filter from this button. I am not sure what the error message is telling me. Thanks for your help.
I have created a runtime setup package for a friend to let her use my Access 2010 application, without having to purchase Access 2010. However, the ApplyFilter macro in one of the forms doesn't work in the runtime environment. The message suggested I use a SelectObject before ApplyFilter but that gave me another error.
How do I apply a filter that automatically loads when a form is opened? For example, I have a check box and I only want to load records where the box is checked.
I have an issue trying to apply a filter to a record-set. Here's the code:
Dim choice As String Dim rset1, rset2 As DAO.Recordset Dim dbs as DAO.Database Dim var As Variant
[code]...
Whenever the last line is executed, i.e. rset2=rset1.OpenRecordset, I get the following error message:<<<Too few parameters, Expected 2>.. It used to work before? Maybe an issue with my library?
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
I am trying to create a form with control buttons on the form for all the letters of the alphabet. When a user clicks on the button for A, I would like them to only see records that starts with an "A". I assume that I should apply an event to the button's OnClick-property, with a filter, but I can't seem to get it right...any suggestions would be very much appreciated!
Hello everyone. I am having trouble with applying filter on 2 date fields in form. I have succeeded by applying fiter on report by Date, but I just can't seem to work it out on Form! I believe there has to be something to do with the DoCmd code.
I have a main form (frmRate) which has fields (txtDate & txtValidity) that contain dates. I have a subform called (frmSearchRateCustomer) which has 4 fields (txtStartDate, txtEndDate, txtStartDate2, txtEndDate2) where the data range should be filled in as search criteria. I have also an additional combobox (cboCustomer) where user can select customer as a search criteria as well. I have a button that has to do the Search in frmRate. The combobox criteria works very well, just the date filtering is not working. I am pasting my code as follows:
Code:Private Sub cmdSearch_Click()On Error GoTo Err_cmdSearch_ClickDim strCustomer As StringDim strFilter As StringDim stDocName As StringDim strForm As StringDim strField As String 'Name of your Order field.Dim strWhere As String 'Where condition for OpenReport.Const conDateFormat = "#dd/mm/yyyy#"Dim strField2 As String 'Name of your Arrival field.Dim strWhere2 As String 'Where condition for OpenReport.Const conDateFormat2 = "#dd/mm/yyyy#" strForm = "frmRate" strField = "txtDate" strField2 = "txtValidity" ' For the Order Date Search Criteria Date range If IsNull(Me.txtStartDate) Then If Not IsNull(Me.txtEndDate) Then 'End date, but no start. strWhere = strField & " < " & Format(Me.txtEndDate, conDateFormat) End If Else If IsNull(Me.txtEndDate) Then 'Start date, but no End. strWhere = strField & " > " & Format(Me.txtStartDate, conDateFormat) Else 'Both start and end dates. strWhere = strField & " Between " & Format(Me.txtStartDate, conDateFormat) & " And " & Format(Me.txtEndDate, conDateFormat) End If End If ' Debug.Print strWhere 'For debugging purposes only. ' For the Arrival Date Search Criteria Date rangeIf IsNull(Me.txtStartDate2) Then If Not IsNull(Me.txtEndDate2) Then 'End date, but no start. strWhere2 = strField2 & " < " & Format(Me.txtEndDate2, conDateFormat2) End If Else If IsNull(Me.txtEndDate2) Then 'Start date, but no End. strWhere2 = strField2 & " > " & Format(Me.txtStartDate2, conDateFormat2) Else 'Both start and end dates. strWhere2 = strField2 & " Between " & Format(Me.txtStartDate2, conDateFormat2) & " And " & Format(Me.txtEndDate2, conDateFormat2) End If End If If IsNull(Me.cboCustomer.Value) Then strCustomer = "Like '*'" Else strCustomer = "='" & Me.cboCustomer.Value & "'" End If ' Build filter string strFilter = "[txtCustomerName] " & strCustomer DoCmd.OpenForm strForm, acNormal, , strWhere ' for date DoCmd.OpenForm strForm, acNormal, , strWhere2 ' for date stDocName = "frmRate" DoCmd.OpenForm stDocName, acNormal ' Apply filter to report With Forms![frmRate] .Filter = strFilter .FilterOn = True End WithExit_cmdSearch_Click: Exit SubErr_cmdSearch_Click: MsgBox Err.Description Resume Exit_cmdSearch_Click End Sub
I have used the same code as I have used for my Report, just changed few things like rpt --> frm etc...
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I am trying to filter a subform based in a combobox. What im doing wrong, is it the Sintax? This is what i have so far..
Private Sub Buscar_Click () Dim strFilter As String strFilter = Me.CombNomes.Value Me.subfrmBANCO.Form.Recordsource = "[Nome]=""&strFilter&""" Me.subfrmBANCO.Requery End Sub
'subfrmBanco is a subform based on a table called "BANCO"' '[Nome] is the field in BANCO that im trying to filter on 'CombNomes is the combobox im using as filter parameter
I Have 2 combo box on a form: Product_Type (6 values) and Product_Name (30 values and each belongs to a type), I want to narrow down the Product_Name to related Product_type whenever I select a type in the first field. Is there anyway to do this?
I'm creating a database about Vets and I need to make a button on my menu form that will open something like message box that will allow me to type in something (in my case Customer ID) which will then apply the filter on the customer form and allow me to do edits. I have only done the macro that will open the customer form but can't figure out how to do the filter part.
I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.
I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.
In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.
However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.
I have a form with a "Keyword Search" This functions great. It applies a filter when I do the search. Which is what I want. But when I'm done, I want the filter removed. I can do this with a macro "ShowAllRecords". This works fine when I click on the command button it is applied to. The only thing is, it is no longer sorted by the "Auto" number field :( . I would like this to be done automatically when I remove the filter.
Is there any way to do this without clicking on my field, and then clicking on the "sort" button on the toolbar?
Thanks for any help.
:p Up to now, I've been able to find the answers to my questions by doing a search on this forum. So thanks to everyone who has been answering everyone's questions
Anyway for questions that state "check all that apply" I could either store in the Response Field a yes, or a no (or a number code for those answers) OR simply store the yes values for ones that are checked. Seems like the latter, but for querying later, will I run into problems? I have had different views based on reviewing posts.
I have a form where people can enter multiple records. In a command button on that form I have code that assigns a unique identifier for the record. Unfortunately I am getting an error and I think it is b/c the code is not running for each record. Is there a way to tell the code to run once for each record?
I have a database that contains a table with all tasks made in our team and the time it takes to perform the task. I have another table with month, year and value in which I put month after month the volumes that each task handles. So, in a query I multiply the time to perform the task and the volume; month after month I have different results. However "the time to perform the task" may vary depending on processes improvements that we made. If before I had 5 minutes to perform the task and now I have 2, I change it and then the results on the query are changed for all months. I do not know if there is a way to specify that that change must be applied from the month where it is updated to the following months and not retroactively.
I have a DB with tables where the primary key fields are autoincremented, but with formatting applied.
Formatting is for example "CC"000000 so record 1 will be CC000001. (each table has a different alpha prefix)
This works fine, except the database content is being read by another application, and it sees only the 1, 2, 3 etc. Exporting the data to Excel format proves that this is due to Access not the other application.
However, if I export to Excel format, and tick the "Save Formatted" option, the data exported is as I require, CC000001, CC000002 etc.
Is there a setting or way to make Access present the data when it is read by another application to be the 'formatted' version of the data?
Hi, OK my main form is unbound and I have a subform in it which is shown as a datasheet. What I'm trying to do is have a list box control at the top that allows the user to filter the records shown in the subform.
Q1. Do I need to have this set-up like this? Is it possible to just use one form? I have tried doing this but when I add my list box, lables etc to the top of the form or the header they just do not appear in datasheet view.
Q2. If I do need to use a subform how do I reference it when using DoCmd.ApplyFilter from my main form:
DoCmd.ApplyFilter , "DrawingNum = '32-35612'"
At the moment this gives an error saying that the action or method is invalid because the form is unbound.
I have a form with names, address, work completed on a certain date. etc. I have a bound textbox called "DATE" and a bound checkbox called "APPLY_DATE_TO_ALL". I wish to enter a date in a textbox called "DATE" then place a check in a checkbox called "APPLY_DATE_TO_ALL" and it applies this date to ALL records.
