I use office 2003, first I had to convert my database, then I did the database splitting then, remove all menus from running at startup, I tried to create an mde file but it didn’t work.
This is what I got:
This error is usually associated with compiling a large database into an MDE file. Due to the method used to compile the database, a considerable number of TableID references are created for each table. The Microsoft Jet database engine version 4.0 can only create a maximum of 2048 open TableIDs at one time. Exporting a database as an MDE potentially can exceed this limit if the database has a large number of objects (table, macro, form, report, etc).
There is no accurate method to estimate the number of TableIDs the Jet database engine uses during the process of compiling a database as an MDE. However, each VBA module and each form uses one TableID, as a result, if the database has 500 forms, and each form's HasModule property is set to Yes, as many as 1,000 TableIDs are used.
So installed office XP and tried the same steps but still not working.
I am running access 2000 9.0.2720. I wanted to create an MDE file but every time I attempt I get the message 'unable to create an MDE file'. Any advice?
I am just having a heck of a time, in trying to make a custom help file.
Has anyone had any luck? I sure would like to see a sample database, showing a custom help file. I just about tried everything, but not to smart about setting one up. I have tried the wizzard as well. I know where I get hung up is, trying to map the help file, to the Help ID number.
I was able to create a MDE database from .MDB file (1900 KB) using Access2000 but not on the other database (5000 KB) I followed the steps (under tool -database utilities- make MDE file), the message box shown " Microsoft Access was unable to create a MDE database"
Is there any limit on the size of the file? What should i do or check?
I have tried to create an MDE file for my database but can't figure out why it will not let me. I can't don't think I am over the limit in open TableIDs. I have 76 Forms and 91 Tables.
I am setup with two databases - the database with the data is on the server. Is there any other alternative that I can do other than putting the mdb file directly on the client. And if not is there a way to stop the mdb file from constantly growing in size.
Hello, I would like to know how to create an empty Excel file (from Access) ? I would like to name the workbook (xxx.xls) name the sheets and give the folder where to store it. Thanks in advance for help. VINCENT
I created a help file in access that lets you have text mesasge up to 1024 chars. Just press F1 key on any control that you have setup to bring up help message.
Does any one see any problems with the way I did this?
Form Help File: = "" Help Context ID: = 0
For each control on the form where you would like to have a help message do the following. Form Control Help Context ID: = Set to one of the help index numbers in the help table.
Add KeyDown Event to the control
Private Sub Text0_KeyDown(KeyCode As Integer, Shift As Integer) 'Add this line KeyCode = DisplayHelp(KeyCode, Me.ActiveControl.HelpContextId) End Sub
module
Function DisplayHelp(KeyCode As Integer, HelpContextId As Integer) As Integer Dim dbs As DAO.Database Dim rstRecords As DAO.Recordset
If KeyCode = VBKeyF1 Then ' 112 = F1 Set dbs = CurrentDb Set rstRecords = dbs.OpenRecordset("SELECT tlbHelp.Index, tlbHelp.HelpMessage " & _ "FROM tlbHelp WHERE (((tlbHelp.Index)=" & HelpContextId & "));")
With rstRecords If .RecordCount > 0 Then Call MsgBox(!HelpMessage, vbInformation, "Help") End If End With DisplayHelp = 0 ' Clear KeyCode rstRecords.Close Set dbs = Nothing Else DisplayHelp = KeyCode End If End Function
Create Table and Fields
Table Name: tlbHelp Field Name: Index as Number Field Name: HelpMessage as Memo Field Name: FieldName as Text Field Name: FormName as Text
How type in custom number and message for each help message.
Hi there, we currently have a database that users write to through an excel form. Each time a user sumbits a record to the database we open a connection up with the below code, insert the record and then close it. This creates a ldb file for 1-3 seconds depending on how long it takes.
' OPEN DATABASE CONNECTION Set dbConn = New ADODB.Connection dbConn.CursorLocation = adUseClient dbConn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0" dbConn.Open sConn
' INSERT RECORD THROUGH EXECUTE COMMAND dbConn.Execute("INSERT INTO.... VALUES....")
' CLOSE CONNECTION dbConn.Close
Is it possible to open the connection up without an ldb file being created so more than 1 user can insert a record into the database at the same time?
I have a main filing table and three look up tables (file cabinet, topic, and subtopic). In the three look up tables I have created short codes to identify the name of the field.
I want to create a main filing code that takes the codes from each lookup table and combines it into one field. If the location of the file changed I would need the code to change.
Example file cabinet location Rod 1 is R1, Accounting is AP; file topic Active Jobs is ACTJOB, Bank Transactions is BANKTR; subtopic Northeast Fire Station is NETCFS. For the file for the fire station the code would read R1ACTJOBNETCFS.
The form is set up as a cascading combo.
The only purpose for this field is to allow me to do a mail merge to create labels so that I can re-file folders easier without having to go into the database and look up the locations.
I don't know if I should create the expression in the form or if I should do something in the table field.
Is there a relatively easy way to output the results of a query to an XML file?
I have the file writer set up more or less: Code: Dim intFn As Integer Dim strFilePath As String Dim strOutBuf As String strFilePath = "c: emp est.xml" intFn = FreeFile Open strFilePath For Binary Access Write As #intFn strOutBuf = "<?xml version=" & Chr(34) & "1.0" & Chr(34) & " standalone=" _ & Chr(34) & "yes" & Chr(34) & "?>" & vbCrLf strOutBuf = strOutBuf & "<file>" & vbCrLf 'DO FOR EACH LOOP HERE strOutBuf = strOutBuf & "</file>" Put #intFn, , strOutBuf Close #intFn If this were a C or JAVA application, I would just write a "for each" statement similar to as follows:
Code:For Each (Row in Query){ strOutBuf = strOutBuf & "<entry>" & vbCrLf For Each (Field in Row){ strOutBuf = strOutBuf & "<" & (Column Name) & ">" & (Value) _ & "</" & (Column Name) + ">" & vbCrLf } strOutBuf = strOutBuf & "</entry>" & vbCrLf} What commands would I use in Access to get each separate row in a query? And then to get each field in that row? And how about the column names for the XML tags?
I would like to read a TIFfle to ACCESS, and store its content as hexadecimal like below to further other process..., how can I achieve this change and storage??
An ancient application I'm working with came with .ini file which looks like an instruction set to create an access database. A sample few lines look like:
TABLE, USER, 13 FIELD,USRID,LONG,2,NODUP,ID,False,0,AUTO FIELD,USRFNAME,TEXT, 50, NO, , True, 1
Let's say I have a database saved in Folder 1. Is there a way for me to create a read-only copy of that database in Folder 2 so that it can be up-to-date with the changes made in the Folder 1 database? I am running Windows 7.
I'd read a few places that embedding pics wasnt the greatest of ideas, but I thought that 1 JPG embedded onto 2 forms would be ok and would prevent the pic from being deleted or moved. (Theyre always screwing with the server here.) But it's making my DB huge.
No pics embedded Size: 808kB
1 Pic Embedded into 2 forms Pic Size: 156k JPG DB Size: 135 MB
Is this normal? I could understand a 156k pic adding somewhere around 156k to my DB, but 134 megs? Anyone have any insight?
I have used the tree control to acomplish this but the major drawback I have found is it becomes WAY too slow when utilizing large amounts of data due to many embeded loops. Does anyone know an alternative or a way to program the tree control to only add nodes once a selection is expanded?
Basically I want this to operate as a drilldown of infinate levels with the speed of windows explorer. Unfortunatly all the code I have seen requires that all nodes are designated/Created when the form is loaded.
I have a spread sheet which on a per line basis contains columns whose cells contain the path to a file. It looks as if many of the files are tif, pdf, word and excel etc, so multiple file types.
Writing a routine which would take each row and then for each line of file paths turn them into one multi-page document - pdf or something?
What I'd like to do is have an "export button", where the OnClick event, exports a single table into a new accde file. This would allow the end users to zip this file up and send it to me.
Because of all sorts of stupidity, I have no network capability and must send data back and forth via email.
I have digressed to a replication table that needs to be uploaded, once data is entered by the users...
Because the files can get relatively large (for emailing purposes), I am trying to figure out how I can get just one table from them vs. sending the whole application file back to me... It's pretty vital that they not be able to edit the table because that could really mess up the process.
So any way to create a new lock file from within the current Db?
how to create file explorer like functionality in ms access.
1 -I need to be able to browse files within specified directory and only. I can't alow users to browse any other directories. 2- I also need to be able upload (copy/paste) folders and files in that directory
I looked at different solutions and found a solution which might work on this foum link below. ---access-programmers.co.uk/forums/showthread.php?t=102667----
The treeview working for browsing specific directory, but i need to enhance it to allow to copy files and folders in that directory.I use MS ACCESS 2010 and not very proficient in programming.
I have a VBA routine that runs some queries and then creates a report as a PDF document using my virtual PDF printer. At this point it brings up the Save As dialog and I give the file a name and select a folder to store it in.
But I run this report 30 times for 30 different parameters. The parameters are obtained from a table which contains values such as Cancer, Diabetes, Stroke
-I always name the PDF file according to this value. -I always choose the same folder. -I always overwrite the reports I produced last month (copies have been sent elsewhere by then).
how can I get VBA to cycle through this code 30 times, each time selecting the next value from my table and creating/overwriting those files without the need for me to tell it the filename and path?
Code: Private Sub lstSpecialties_DblClick(Cancel As Integer)
At the moment I am running this code by double-clicking an entry in the Specialty listbox, 'but I would prefer the whole thing to run multiple times for as many Specialties as exist in the table '(currently 30 but could be more in time)
'Warnings off DoCmd.SetWarnings False 'Make the tables needed for the cumulative queries DoCmd.OpenQuery "Spec 002 Monthly recruits - part 2 - make table" Each of these queries DoCmd.OpenQuery "Spec 005 Monthly recruits - part 2 - make table" uses the Specialty selected above DoCmd.OpenQuery "Spec 022 ABF previous year - part 2 - make table" as a parameter to get DoCmd.OpenQuery "Spec 025 ABF current year - part 2 - make table" the right data for the report
I have been reading a lot about Access Runtime and the problems that occur when a runtime application is installed on a machine that already has a full version of Access. Any program that can be used to create an .EXE type file for an access application that will eliminate all of these problems? The cost of the compiler program is not a major concern if it works!!!
Hi Please help me, I have the form, in this form there is list of value which run query and resulting the report. For example if I have 5 item in list, i have to choose one of then and the query running and the report is print preview.
My question is, How to export all 5 report to 5 sheet in one excel file. I know may be the problem in format if I send to excel, but I will fix it in the excel. The most important is, I export the report to excel, each of the report in each of sheet of excel.
I have a folder which holds 1000s of pictures organised in subfolders, for example:
D:~AI Database Print Scans2009family and D:~AI Database Print Scans2009holiday
And so forth. In total at the moment 17 main subfolders, each of which hold another 2-3 subfolders.
I am putting together a database to bring pictures together with all sorts of details. I import the picture via hyperlink and complete the various fields. All that works fine but there are a lot of pictures! And it gets confusing to see which ones have already been entered into the database and which ones haven’t.
One solution for this is to copy the pictures that have been “completed” to another folder. I have found a way to do that:
Dim fs As Object Dim oldPath As String, newPath As String oldPath = Forms!frmPrintDetails.txtPath1 newPath = "D:~AI Database Print ScansCompleted_Entries" Set fs = CreateObject("Scripting.FileSystemObject") fs.CopyFile oldPath, newPath Set fs = Nothing
Works fine, but the problem is that I loose the subfolder structure, it copies all pictures to the same main folder. I’d like to maintain the subfolder structure and add code to create the correct subfolders and next copy the picture. With the different paths I’m lost. I don’t know how to extract the correct path in code. I’d also like to either rename or remove the picture once I have completed entry of the details. The problem I have again is that I don’t know how to code for a changing path.
I want to create a Macro saves the report in a specific location, and uses two fields within the report to generate the name of the file. For example, "[Sales Rep Name] + [PayPeriod].pdf" and it should be saved in a predetermined folder.
Looking for a way to use transfertext to make a table and create a spec file from csv files I am importing. I want all fields in the table to be shorttext.
Otherwise I need another way to bring the files into a table.
I have a generic spec to use that brings in any data as text.
Created the spec from a delimited file with 255 text fields... Field001, Field002, etc.
However the field names need to be changed. My field names are in the first row of a table. I will need to read each fields data in the first row and rename the field.