Hi,
Is there any way to change orientation of report in report footer? I mean, I want to produce report header, detail etc in landscape and after detail I have given page break, at last page only report footer should be in portrait.
Rahul
hi...
im trying to create like a test in access. this is the idea. the user open the first form to enter the info like student number, name and so on. when he clicks the button he goes to another form where is the first question. in the top part is the student number wich was obtained from the First form and an option group with the answers to the question of the label box. Also a timer was included so the form close after one minute using the form_timer event. everything seem to work fine but when i go to the table to see the answers of the student, it look like if the student took the test for the number of questions, in this case forms, so if there is 20 questions(forms) it appears 20 times under the same student number, cuz all the questions are in diferent forms. then i try to take out this line from the first form when the user click the button:
DOCMD.GOTORECORD,, aclast
when i take that line out it seem to work fine only that when the user click the cmd button it goes to the first record instead of the active student record.
So then i thought of tab pages making them not visible until the user click the cmd button. it work fine with the cmd button but how do i put a timer to all the tab pages so that when time expires the next tab appear??
is that a bit hard??/
any help would be appreciated, thanx
Hello visitors,
I have a report base on a select query but in the report i get the following:
page 1 = record 1
page 2, page 3, page 4 = are empty (nothing to see on the pages)
page 5 = record 2
page 6, page 7, page 8 = are empty (nothing to see on the pages)
page 9 = record 3
...........etc...
So there are three empty pages between every two pages(records).
I have checked in the settings of the report and all properties but cannot find the solution.
Can any one help me to solve this ?
Thanks in advance
With Access XP, I have a simple two page report (with a subreport included). When I go to print it, it prints out about 32 copies.
Of course, in the Windows print que, it is set to one copy.
There has to be some setting in the report causing this.
Thanks
I have already created a summary report that is one page long, however, every time I view my report in report view, export to PDF or print, the report has duplicate copies! Not blank pages. Just duplicate copies of my one page. The report is generating hundreds (about 700) of the same exact page. How do I force my report to have just one page.
View 3 Replies View RelatedWhile I have worked with computer all my life I am new to Access. I managed to create my database and the report I wanted to generate. However; I cannot get the Report Header to print on all pages. It only prints on the first page.
View 9 Replies View RelatedI have a report that has a number of grouping levels.I would like the highest grouping level to determine a new page.
View 2 Replies View RelatedI'm working with getting a 3 page report to print/create PDF of the 3 pages. Right now I have the formatting set up for the 3 pages but each is an individual report.Is there a way to combine the reports into a single report? I've been messing around with subreports but can't get it to display correctly.
View 3 Replies View RelatedSend only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
View 4 Replies View RelatedI've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
its doing this on all my reports.
I have a main report with 2 subreports. My main report has a header section, the 2 subreports are in the detail section of my main report. How can i prevent my report from splitting up my header and my subreports. (Header section of my main report is a company and the subreports are the detail of the company.. i don't want my compnay name on the bottom of a page and then the detail on the next page.. it does this sometimes. thanks!
View 5 Replies View RelatedI can not get my Access Report to give me a total number of pages by group. I've been able to have it give the correct page number per group but not the total number of pages in each group. I've looked at the threads and it appears that in order to get this, you must do a 2 part pass. 1st to get the page number and then to get the total papers per group.
I've used the code supplied and when I do a print preview, I get the message that it can not find the control, Me!ctlGrpPages. This is the control I created and placed in my page footer section of the report. I've also seen numerous references to the report, "Employee Sales by Country" in the Northwind database. I downloaded the database but could not find this report in the database.
Wonder whether anyone can help me?
Each day I produce reports from access and email then out using the snapshot viewer format. The majority of recipients open this find and the report is absolutely fine, however, when other recipients open the report it comes out all slanted and blurred. It almost looks like there snapshot viewer is squashing a landscape report into a portrait view. Does anyone know how to correct this, as its driving me mad trying to find an answer?
thanks:)
I am fairly new to developing with Access.
I would really value some advice on changing text direction in crosstab query column labels.
I have just created a crosstab query to function as a training matrix. It has rather long column labels (there are good practical reasons for this), which makes the query very wide and difficult to print one one page.
Is there a way to change the text direction of the column headings so they are printed running up the page?
I know how to change text direction in Word or Excel, but not Access.
At the moment I am copying the query results into Excel and manipulating the text direction in Excel, but this is rather cumbersome.
Thanks in anticipation of any help. :cool:
I have the following code in a module to set certain formatting properties when exporting an Access 2010 query to Excel:
With xlApp
.Application.Sheets("Spoilage").Select
.Application.Cells.Select
.Application.Selection.ClearFormats
.Application.Range("A1:K1").Select
.Application.Selection.Font.Bold = True
[code]....
This works perfect but now I need to set some of the page layout properties (margins, orientation, etc.)
I have tried adding this:
With ActiveSheet.PageSetup
.LeftMargin = Application.InchesToPoints(0.5)
.RightMargin = Application.InchesToPoints(0.5)
.TopMargin = Application.InchesToPoints(0.75)
.BottomMargin = Application.InchesToPoints(0.75)
.Orientation = xlPortrait
.PaperSize = xlPaperA4
End With
But I get a complie error (Method or data member not found) on the .InchesToPoints part of the line.
But I get a complie error (Method or data member not found) on the .InchesToPoints part of the line.
How to Creating a Three-Level Navigation Form, First and second level must be in horizontal orientation, third level desirable be to vertical orientation and dependent of level 2.
View 1 Replies View Relatedmust i install a printer in order for me to change my report to landscape?.. This doesn't sound right to me.. currently my report is set to portrait and when i go to page setup (menu option) i receive a msg saying i must install a printer first.. is this the only place where i can set my report to landscape?.. is there a property i've overlooked?.. thanks!
View 4 Replies View RelatedCan we change the orientation to 45 degrees in a label ?
View 1 Replies View RelatedI have a report with subreports contained in it. Each subreport gets it's data from a different table.
I noticed subreport 1,2,3,4 are pulling the data from their corresponding tables. However, subreport 5,6, and 7 are pulling their data from the table relating to subreport 1.
I've checked the subreports themselves. They are referencing their own tables if I open them individually but not when opening the main report.
The report names all seem to be correct.
I've never seen anything like this before. Does anyone have some ideas??
Thanks.
OK. I have a report that I want to use as a master and use with about 4 different querys. In the report properties I've bound it to a query. I've tried for ages to change the record sources with on click command bottons on another form. I think things have become complicated because there's a subreport on the report I AND a there's bunch of code to make things invisible in the on page event of the report.
anyway, here's what I'm using:
DoCmd.OpenReport "rpt_master", acViewPreview
Me.RecordSource = "qry_rptPrintRollClass"
Is this the right way to do it??
Any ideas on how I can clean it up??
Thanks
Damon
Hi all,
Does anyone know how I can, as stated, change a report's query dependency? I copy and pasted several reports and want to make macro buttons to access the reports and put them on a form. However I want each button to point to a different query, which in turn point to different reports.
When I copy and pasted the reports, I go into "Objects that I depend on" and I can't change the query it points to! Help!
Richard
I have designed a report that took ages to do the layout etc for.
Now I just want to use that as a template and just alter which query it gets its parameters from.
I can't for the life of me figure this one out
Any help would be very much appreciated
I have a form with command button, when clicked it displays My report in Preview. I want to change the report title whenever i click a button from the form. I believe it is to do with VBA and am new in that.
View 8 Replies View Relatedhow to change existing comments on a report?
View 1 Replies View RelatedWhat I'm trying to do is make it so that a certain area of my Detail area in my report changes colors based on whether or not a field name for each record is set to "Yes". The effect I wanted was produced easily enough by creating a Rectangle, coloring it Red, and setting it to not visible.
Putting RedBox.Visible = True in the Report On Load procedure works just fine. The problem I am having is attaching a condition to it.
Code:
If Me.FormatBox.Value = "Yes" Then
RedBox.Visible = True
End If
This compiles ok, but doesnt do anything to the actual report. Will it not work because the report has x amount of FormatBox's because it gets replicated for each record that is displayed? I should also note that I tried using a DL Lookup within my If statement and that didnt work either. That just colors all the boxes red and ignores the check.
Code:
Dim TestVar As String
TestVar = DLookup("Priority", "Table_Lancaster_Dispatch", "Priority = 'Yes'")
If TestVar = "Yes" Then
RedBox.Visible = True
End If
I have a report that contains game and its rating, the rating goes from -10 to +10, I would like to highlight the games that have a rating 1 or more with green color, rating 0 with yellow, and -1...-10 with red color, allso I would like to make a link on the game, so that when I click on it, it will open a form where that game is registered, for example it I want to change rating.
View 2 Replies View Related