Hi All
I have a database table with a long date format 05/08/1995
I am trying to think of a way to alter the data in a query so it shows 08/1995. without comprimising the field that says 05/08/1995.
any ideas? I can add a new field but not sure
Hi, I'm newbie.
I did create LANDesk Date Control in the form but the date format shown MMDDYYYY.
I want change the date format to DDMMYYYY...how?
& how do I link the LANDesk Date Control into tables as database?
p/s - can I change font color date of "Sat" & "Sun" to red color instead? Please guide.
Thanks.:D
In my query I have a date field and it is half UK british and half US. I have my regional date set to UK on my laptop.
how to change it to same date? I don't mind either, I just want it to be consistent.
I am struggling to change the format of 2013-07-29 11:33:03.6160000 to show dd/mm/yyyy
View 4 Replies View RelatedHi All,
The following code is supposed to insert a date formatted as dd/mm/yyyy into a table, when i view the mySQL string in the debug window it shows the correct format, however when i open the table it displays the date as mm/dd/yyyy.
The table's date field userdate is formatted as a short date field with an input mask of dd/mm/yyyy.
My computers date settings are set up as dd/mm/yyyy as well
Any ideas on hows to correct this?
Thanks in advance. :)
Public Function Test()
Dim mySQL As String
Dim dtDate As Date
Dim db As Database
Dim qdf As QueryDef
Set db = CurrentDb()
dtDate = Format(Now(), "dd/mm/yy")
mySQL = "INSERT INTO tblCurrentUser( userdate ) values (" & "#" & dtDate & "#" & ");"
Debug.Print mySQL
'*The debugger shows* INSERT INTO tblCurrentUser( userdate ) values (#04/05/2005#);
' However the value in my table tblCurrentUser is05/04/2005 is in mm/dd/yyyy format
Set qdf = db.CreateQueryDef("", mySQL)
qdf.Execute
End Function
I have set the Left([DSERDBA_RECEIPTS].[RCTH_RECEIPT_NO],8) AS [DISTRIBUTION DT] field property to Short Date, 99/99/0000;0;_ . When I run the query I get that field formated as a short date, but when I try to create a table from the same query the data returned is no longer in the date format. Is there something I can do to have the make table results look like what I get when I just run the query without creating a table?
SELECT
DSERDBA_RECEIPTS.RCTH_ID_CASE AS [CASE],
DSERDBA_RECEIPTS.RCTH_DT_RECEIPT AS [DT RCTH],
Left([DSERDBA_RECEIPTS].[RCTH_RECEIPT_NO],8) AS [DISTRIBUTION DT], DSERDBA_DISBURSEMENTS.DSB_DT_DISBURSE INTO [TABLE 1]
FROM [UNIVERSE OF CASES] INNER JOIN (DSERDBA_RECEIPTS INNER JOIN DSERDBA_DISBURSEMENTS ON DSERDBA_RECEIPTS.RCTH_RECEIPT_NO = DSERDBA_DISBURSEMENTS.DSB_RECEIPT_NO) ON [UNIVERSE OF CASES].STAT_CASE_ID = DSERDBA_RECEIPTS.RCTH_ID_CASE
WHERE (((DSERDBA_RECEIPTS.RCTH_ID_CASE)="20028570P"));
I have a table having column as date, format as mm/dd/yyyy and i update the column as now() using VBA.
However some places the date is in mm/dd/yyyy and in some mm/dd/yyyy nn:mm:ss are appearing which is making the filtering of the data ambiuge.
I am importing data that has been put onto Notepad into an Access table - this works fine except the date in notepad comes across as a date and a time. When I put the table into a query and ask for the date to be Between [Specify date 1] and [Specify date 2] - does the user have to then put 7/02/2005 00:00:00 AM and xxx. I have tried this but it doesn't return all values. I have also tried just the dates but this doesn't return all values either - any ideas?
View 6 Replies View RelatedI have a simple and small database having only one table. I want the data table to be exported in a spreadsheet format automatically at the end of the month. Is there any code or function to do that?
View 1 Replies View RelatedI have a link table that has a field that represents dates - but they are actually just text. It's a long story but the source is not going to change - so I have to try and deal with it. I need it to behave as a date - and am hoping to do this in a query. The data looks like this:
7/24/12
10/08/13
I have tried various things but it does not seem to totally do the trick - if I sort on it it still does not sort as one would expect from an actual date field. How do I do this?
I wanted to assign the field "Number of magazine" with special format based on date/time format but showing only year and month in the format: "yyyy-mm".
So in property of this field in format I put yyyy-mm and in input mask I type 0000-00;;-
I also created the form based on the table containing above field and I defined format and input mask for corresponding formant in the same way like at the table.
But if I try to type date for example 2014-01 in text box of the form it comes up with the full date 2014-01-01. Why does it do like this? What do I do incorrectly?
I have a table that contains many column but one of the columns is the "Collected Date". the dates entered in this column in in this format: 2013.10.28 however I to upload this table in another software to analyse, I need the date to be in this format: 10/28/2013 I already tried changing the format in the design view but since the format is currently in text it does not allow me to change the format into date!
View 1 Replies View RelatedI have a list of dates in the mm/dd/yyyy format and I am looking to get it into the fiscal format of yyyyww. I am able to do this with the datepart and format functions, but I need to make it so that the fiscal month begins in January but the first week starts if there are three or more days in the week. For instance if Jan 1st is a Friday then this stands as the first fiscal week, if it is a Saturday then it does not count as the first week.
datepart and format functions have the Use the first week in the year that has at least 4 days for the firstweekofyear option but I need it where it has at least three to make it work.
The DB this info is pulled from stores the NAME field in all caps.
My query returns the name like= JAMES JONES
Is there something I can do to change the name format to James Jones?
SELECT
[OPEN CASES].CASE,
[OPEN CASES].[MEMBER#],
[CLIENT TABLE 2].NAME,
[CLIENT TABLE 2].A1,
[CLIENT TABLE 2].A2,
[CLIENT TABLE 2].ADD INTO [MEMBER CASE TABLE]
FROM [CLIENT TABLE 2] INNER JOIN [OPEN CASES] ON [CLIENT TABLE 2].MEMBER = [OPEN CASES].[MEMBER#]
WHERE ((([CLIENT TABLE 2].RELATION_CODE)="C")) OR
((([CLIENT TABLE 2].RELATION_CODE)="S") AND
([CLIENT TABLE 2].MEMBER_CASE_STATUS)="A"))
ORDER BY [CLIENT TABLE 2].ADD;
Hello. I'm triyng to change every field format in a Form each time I jump from one field to another. I want it to get grey and bold when it got the focus
I managed it with a GetFocus and Lost Focus for each field but whena form has a lot of fields it gets "a lot" of programing.
Is there a way of doing it another way, for instance On current
Thanks
Hi all,
I had a form with a command button which invokes email sending option to send a report..I am using code from a sample database . The code which I am using is here:-
'This will create the e-mail
DoCmd.SendObject acReport, "Rpt_Customer", "RichTextFormat(*.rtf)", "", "", , "Customer Report", "", False, ""
'Tbis explains all the section of the e-mail see SendObject in help
Rem example from help DoCmd.SendObject [objecttype][, objectname][, outputformat][, to][, cc][, bcc][, subject][, messagetext][, editmessage][, templatefile]
The code is working perfect and my question is that can I change the file format from RichTextFormat to word format????? I tried by chaning "WordDocument (*.doc)" but it didn't worked???? Is there any way I can change that to word format (*.doc)???? any suggestions appreciated .
thanks in advance
Thanks
I have a "make table" query. Inside that query there is a simple expression that divides two fields by one another to arrive at a %. Example 5/100=5%. However, the data returned is not in a % format.I know that I can go into table properties and change the fromat to "percentage", but that will only work for the current table that I have created. Once I re-run the "make table" query, I lose the change to the format, and my value again returns to a number, not a %..
Is there any way to always have a percentage returned without having to manually change the format each time that I run the query, or having to make a "delete" and "append query" ?
I have a table that contains information along with a field named "Date Input" and then a calculated field called "Due NLT Date". New records are appended to this table daily. The calculated "Due NLT Date" field is simply "[Date Input]+5".
In some unforeseen circumstances the "Due NLT Date" field needs to be extended to 6 or 7 days from the "Date Input". I am trying to find a way adjust the number of days using a command button/VBA getting the desired number of days either from an input box or from a txt box on a form.
I have been playing with using SQL ALTER TABLE in VBA but can't get it to work.
I'd image it would look something like this but how to write it correctly:
RunSQL ALTER TABLE "table" FIELD "field" to calculated "[Date Input]+ & input box "Enter number of days""
First off a big thank you to this forum... have solved a lot of questions I have had and some I never knew I had. Keep in mind this is all from a non-programmer so my question(s) might not be technically sound.
The issue I have is I have built a database to track documents that we process. It is uses an autonumber and that has worked great. The issue is eventually this document gets processed in our accounting system and I want to retrieve data from there and add it to the document record.
I figured out how to like the ODBC database and that worked, but I get an expression error. The field in the ODBC database is text and in Access it is an Autonumber.
Is there a way to copy the autonumber field and change it to text property to align with the other database?
All help welcome and appreciated.
I came into a database where the forms have checkboxes connected to table fields that are in text data type. I see that when the checkbox is checked, the value in the field is still -1 in the table. Is there a reason to change these fields to Yes/No data type or just keep them as they are? Are there limitations or problems to having Yes/No values (-1) in a text field?
View 2 Replies View RelatedI have a list of patients that are seeing various clinicians in a clinic. Currently everything is on paper and when a patient arrives we highlight their name on the list. So now that I'm finally moving everything paperless, I want to have the record become "highlighted" when I select patient has arrived. The only problem is as it's a continuous form, the formatting changes on all records. Here is the screenshot before anyone arrives:
Those are two separate records that you see. Behind all of those fields is a box coloured #E7F442 (optic yellow-ish). What I want is when I select "Arrived" from the dropdown, for the fields on the left (name, number, appointment type, etc) to become transparent so the yellow shows through and looks highlighted. I've used this code:
Code:
Private Sub ATCST_AfterUpdate()
If Me.ATCST = "Arrived" Then
Me.RGBCHID.BackStyle = 0
Me.PATNAME.BackStyle = 0
Me.TCDESC.BackStyle = 0
Me.VISPURP.BackStyle = 0
Me.ATCMNT.BackStyle = 0
Me.ATTIME.BackStyle = 0
Me.ATCST.BackStyle = 0
[code]....
Making the whole code utterly useless, as it's changing the formatting on every record. Is there a way to program this so the formatting changes only affect the record I'm working on at that moment?
I'm working on a purchasing database where if the user checks a box on a subform, another field needs to be disabled. The code works, but since this is a continuous subform, it disables that field on every row. Is there any way to make it stick to the row the user is working on?
Here's the code:
If Me!acs_puchase = -1 Then
Me!inventory_po.Enabled = False
ElseIf Me!acs_puchase = 0 Then
Me!inventory_po.Enabled = True
End If
Thank you!
I use expression on the query field, but after I run it, the field change its format from number to text, how to reformat on the query criteria to change the text to integer format?
View 8 Replies View RelatedI'm having a format problem. I have a query (Q1) that, among other things format a date field as YYYYMM (Field1).
I have a second query (Q2) whose data source is Q1.
In Q2 I need to link Q1 to a table but Field1 is being reformatted as text (confirmed by running a make table query).
I want Field1 to be Number format to eliminate a mismatch error.
I know how to change the format of a field in a table using VBA but I cant seem to find a way of changing the format within a query.
I have created access database having field currency but it shows currency in $ by default I want to changed it to Rupee. How could it do?
View 1 Replies View RelatedHi All,
If it is possible to change the format properties of a menu/toolbar could someone please point me in the direction of some guidance/ let me know how to go about it I would appreciate it.
Specifically I'm trying to change the menu bar's /database window's property to match my forms (and company branding).
I've Googled various phrases in both UK and US spellings (to be on the safe side) and searched a few forums (this one included) and cannot find much beyond creating customised menu/tool bars.
Many thanks